Comparison TCL 65C845 65 " vs TCL 65C935 65 "

The level of dynamic contrast provided by the TV screen.

Contrast in a general sense is the ratio in brightness between the brightest whites and the darkest blacks that the screen can produce. Other things being equal, the higher the screen contrast, the better the quality of colour reproduction and detail, the lower the likelihood that it will be impossible to see details in too bright or too dark areas of the image. Formally, the main characteristic of screens is static contrast (see above), but even in advanced matrices it is relatively low. Therefore, manufacturers went to the trick, introducing such a characteristic as "dynamic contrast".

Dynamic contrast ratio is the difference between the brightest whites at the highest screen brightness settings and the darkest blacks at the lowest. These contrast ratios can be quite impressive—much higher than static—however, it is impossible to achieve such values within a single frame, and dynamic contrast ratio is stated more for promotional purposes than for describing the actual specifications of the screen. However, it cannot be said that this indicator is completely unrelated to reality. The fact is that many TVs use automatic brightness control, which changes the settings depending on the characteristics of the image. This control is based on the fact that when displaying bright scenes, there is no need to provide a deep black level, and in dark scenes, high brightness of light areas is not needed — th...ese are the features of the human eye. This means that in bright scenes you can increase the overall brightness, and in dark scenes you can reduce it; the maximum brightness difference achievable in this mode of operation is precisely described by dynamic contrast.

The IMAX Enhanced Seal of Conformity is awarded to televisions that meet the video device certification requirements of IMAX Corporation. It applies to streaming and Blu-Ray content shot with IMAX cameras or processed using special DMR (Digital Media Remastering) software. To qualify for IMAX Enhanced certification, your TV must have 4K resolution, 10-bit color, support HDR10 and HDR10+, and DTS:X audio. As a result, viewers get the opportunity to enjoy the immersive effect of an IMAX cinema at home.

The nominal power of the sound produced by the TV's sound system.

The larger the screen and the greater the estimated distance to the viewer, the more powerful the sound system must be in order to be heard normally. Manufacturers take this moment into account, moreover, most often they also provide a solid volume margin. So if a TV is bought for home viewing in a quiet, calm environment, you can not pay much attention to the sound power: it is guaranteed to be enough for such a usage. It makes sense to specifically look for models with high-power speakers for a noisy environment — for example, a cafe or other public space. Detailed recommendations on this matter can be found in special sources, but here we note that even in such cases, connecting external speakers can be a good alternative.

The number of speakers installed in the TV.

Theoretically, one speaker is enough to work with sound, but most entry-level and mid-range models (as well as many premium devices) provide two speakers — for stereo operation, which allows to achieve some surround sound effect. And more than two speakers usually means the TV has enhanced audio capabilities such as a subwoofer or soundbar (see below).

A decoder can be broadly described as a standard in which digital audio (often multi-channel) is recorded. For normal playback of such sound, it is necessary that the corresponding decoder is supported by the device. Dolby Digital and DTS were the first in multi-channel decoding, gradually improving and introducing new features. The final stage for 2020 is Dolby Atmos and DTS X decoders.

– Dolby Atmos. A decoder that uses not a rigid distribution of sound across channels, but the processing of audio objects, due to which it can be used with almost any number of channels on a reproducing system — the sound will be divided between channels so that each audio object is heard as close as possible to its proper place. When using Dolby Atmos, ceiling speakers (or speakers facing the ceiling) are highly desirable. However, in extreme cases, you can do without them.

— DTS X. An analogue of the Dolby Atmos described above, when the sound is distributed not through individual channels, but through audio objects. The digital signal contains information about where (according to the director's intention) the object audible to the user should be and how it should move, and the processor of the reproducing device processes this information and determines exactly how the sound should be distributed over the available channels in order to achieve the required localization. Thanks to this, DTS X is not tied to a specific number of audi...o channels — there can be as many as you like, the system will automatically divide the sound into them, achieving the desired sound. Also note that this decoder allows you to separately adjust the volume of dialogues.

Types of digital tuners (receivers) provided for in the design of the TV.

Such tuners are necessary for receiving digital TV broadcasts; for normal operation, the broadcast standard must match the type of tuner (with some exceptions, see below). Note that the receivers are also available as separate devices; however, it is easier (and often cheaper) to buy a TV with a built-in tuner of the desired format. In modern TV you can find terrestrial tuners DVB-T2, cable DVB-C and satellite DVB-S and DVB-S2, here are their main features:

— DVB-T2 (terrestrial). The main modern standard for digital broadcasting. Such broadcasting has a number of advantages over traditional analogue broadcasting: it allows higher resolution and multi-channel audio transmission, with better sound and picture quality, and this quality is fully preserved until the signal weakens to a critical level. However, in some countries digital terrestrial broadcasting is just being put into operation, so it will not hurt to check the availability of DVB-T2 coverage in your area.

— DVB-C (cable). The main modern standard for digital broadcasting in cable networks. Despite the advent of the more advanced DVB-C2, it still continues to be widely used, and most likely this situation will not change for a long time.

— DVB-S (satellite). The first...generation of the digital DVB standard for satellite broadcasting. Nowadays, it is relatively rare due to the advent of a more advanced DVB-S2, which is also backwards compatible with the original DVB-S.

— DVB-S2 (satellite). The most advanced and popular of today's digital satellite broadcasting standards. Being the heir to DVB-S, has retained compatibility with it; therefore, manufacturers often limit themselves to installing only a DVB-S2 tuner on their TVs — it allows you to receive both major satellite broadcast formats.

Among the features of the TV, first of all, it is worth noting its communication features, which include AirPlay 2, Wi-Fi(in particular Wi-Fi 5 and Wi-Fi 6), Miracast, Chromecast, Bluetooth. As a control, in addition to the classic remote control, there can be voice control, voice assistant. As well as special features in the form of Ambilight from Philips. More about them:

— Airplay. TV support for AirPlay technology, usually in the AirPlay 2 version. Initially, this technology was created to broadcast multimedia content from Apple gadgets (iPhone, iPad, etc.) to external devices, including TVs. At the same time, it allows not only to play such content, but also provides many additional features — broadcasting additional information (title of the sound track, album cover), playback control from the TV remote control, etc. In AirPlay 2, in turn, the "multi-room" format was added — the ability to simultaneously broadcast several signals to compatible devices installed in different places at home (for example, a movie on a TV and an online radio programme on sound system in the kitchen). In addition, in this version, support for voice control via Siri has appeared and...a number of technical issues have been improved (in particular, buffering of streamed content).

— Wi-Fi. The presence of a built-in Wi-Fi module in the TV; the supported version of this technology can also be specified in this section. Nowadays, Wi-Fi can be used both for wireless access to the Internet and local networks, as well as for direct connection with other devices (for example, broadcasting video from a smartphone/tablet). The specific application of the wireless connection may be different, depending on the functionality of the TV; in addition to Internet access, examples include DLNA, receiving or transmitting video via Wi-Di or Miracast, and using a mobile gadget as a remote control. However, almost all models with this feature belong to Smart TV (see above).
As for Wi-Fi versions, the most relevant nowadays are Wi-Fi 5, Wi-Fi 6 and Wi-Fi 6E. Also note that, in addition to these Wi-Fi standards, earlier ones are usually supported — so compatibility problems does not occur.

— Miracast. TV support for Miracast technology. This technology allows you to broadcast video and audio signals via Wi-Fi technology (both to the TV and from it to portable electronics), while both devices are connected directly (Wi-Fi Direct) and do not require additional equipment, and the bandwidth is sufficient for Full HD video transmission and 5.1 multi-channel audio. Some time ago, TVs used a similar WiDi technology, but nowadays it is almost ousted from the market, and most manufacturers use Miracast.

— Chromecast. Chromecast technology allows you to quickly and easily stream video and audio from your smartphone, tablet or computer to your TV. In fact, Chromecast is a network media player, because after setting up this function, you can wirelessly display the video recorded on your smartphone on your TV with just one touch.

— Bluetooth. Bluetooth technology (any version) is used for direct wireless communication between different devices. How it is used on TVs may vary, depending on the functionality of a particular model (and version of Bluetooth). So, it is almost mandatory for Bluetooth TVs to be able to transfer sound to wireless headphones or speakers. In addition, other use cases may be provided: connecting keyboards, mice and game controllers, direct file exchange with a laptop, remote control from a smartphone or other gadget, etc. These details should be clarified separately. As for specific versions, in many models these details are not specified at all — for use for the intended purpose, “just Bluetooth” is enough. However, there are exceptions, and here the following options are relevant for modern TVs:

• Bluetooth v4.0. A version that combines traditional Bluetooth 2.1, a high-speed standard for transferring large files, and "Bluetooth Low Energy" for small amounts of information. All subsequent versions are built on these three components (with various improvements), and v 4.0 was the first where they appeared all together.
• Bluetooth v 4.1. Improvement of version 4.0, in which compatibility with mobile devices of the 4G LTE standard has been improved — so that the LTE and Bluetooth modules do not create mutual interference while working nearby.
• Bluetooth v4.2. Further development of version 4.0; updates that are relevant for TVs include mainly improving the reliability and noise immunity of communications.
• Bluetooth v5.0. One of the key improvements in version 5.0 compared to previous editions of the protocol was the presence of two special “Low Energy” modes – increased range (due to reduced speed) and increased speed (due to reduced range).
• Bluetooth v 5.1. Update of the v 5.0 version described above. In addition to general improvements in the quality and reliability of communication, this update has implemented such an interesting feature as determining the direction from which the Bluetooth signal is coming. Thanks to this, it becomes possible to determine the location of connected devices with an accuracy of up to a centimeter (for example, a remote control).
• Bluetooth v 5.2. The next, after 5.1, is the fifth-generation Bluetooth update. The main innovations in this version are a number of security improvements, additional power optimization in LE mode, and a new audio signal format for synchronized parallel playback on multiple devices.
• Bluetooth v 5.3. The Bluetooth v 5.3 wireless protocol was introduced at the beginning of 2022. Among the innovations, it accelerated the process of choosing the communication channel between the controller and the device, implemented the function of quickly switching between the state of operation in a small duty cycle and high-speed mode, improved the throughput and stability of the connection by reducing the susceptibility to interference. In case of unexpected interference in the Low Energy mode of operation, the procedure for selecting a communication channel for switching is now accelerated. There are no fundamental innovations in protocol 5.3, but a number of qualitative improvements are seen in it.

— Ambilight. Screen backlight technology. In this case, the TV case illuminates the wall/partition located at the back, due to which a blurry halo appears around the screen contour in the colour of changing scenes. This effect visually expands the screen area, making watching TV more enjoyable. There are three types of backlighting in total: classic Ambilight (on the sides only), Ambilight Surround (on the sides and top), Ambilight Full Surround (from all sides). But manufacturers continue to work on improving the backlight. So, relatively recently, the Ambilight Spectra backlight has appeared, in which the colour matching algorithm has been significantly improved and the LEDs themselves have been optimized.

— Voice control. TV support for voice control allows you to dictate certain commands through the remote control. However, not all functions are covered by voice control and recognition accuracy may require re-entering the command. If you need a more extensive range of functions, then pay attention to the voice assistant.

— Voice assistant. For a long time now, device control has been shifting to voice commands. For this, certain interfaces and systems are used. The most popular are Amazon Alexa and Google Assistant, as well as Samsung's own Bixby assistant. For "apple" devices, this is Apple Siri, but this technique is not presented on TVs. At the same time, unlike the voice control function, the voice assistant does not just turn on this or that function, mode, makes it louder, quieter, but allows you to perform certain operations in applications, whether it is to launch the desired clip in Youtube or display the weather in the browser.

The TV's connectivity options are based not only on wireless technologies (described above), but also on a wired connection. In particular, additional video transmission can be carried out through VGA, composite AV connectors . Some of them also provide sound transmission, in addition to which there may be a mini-Jack (3.5 mm) and other ports for communication with external devices. More about them:

— USB. Connector for connecting external peripheral devices. The presence of USB means at least that the TV is capable of playing content from flash drives and other external USB media. In addition, there may be other ways to use this input: recording TV programs to external media, connecting a WEB camera (see same paragraph), keyboard and mouse to use the built-in browser and other software, etc. The specific set of options depends on the functionality of the TV, it should be specified separately in each case.

— Card reader. A device for working with memory cards, most often in SD format. The main use of the card reader is to play content from such cards on a TV; such an opportunity is especially convenient for viewing materials from photo and video cameras — it is in such devices that memory cards are widely used. There may be other ways to use this function — fo...r example, recording from the broadcast or even exchanging files between the card and the TV's storage. It is worth bearing in mind that SD cards have several subtypes — original SD, SD HC and SD XC, and not all of them may be supported by the card reader.

— LAN. Standard connector for wired connection to computer networks (both local and the Internet). Mostly found in models with Smart TV support (including Android TV devices; see related paragraphs). A wired connection is less convenient than Wi-Fi, not as aesthetically pleasing, so manufacturers place more emphasis on a wireless connection, as a result of which the speed indicators of the LAN connector are not indicated, and in some cases may be unacceptable for 4K broadcasts.

— VGA. Analogue video input, also known as D-sub 15 pin. Initially, the VGA interface was developed for computers, but due to the emergence of more advanced standards like HDMI (see below) and technical limitations (the maximum resolution is only 1280x1024, the inability to transmit sound), it is considered obsolete and is used less and less. So it makes sense to specifically look for a TV with such a connector mainly in cases where it is planned to be used as a monitor for an outdated computer or laptop.

– Composite AV input. Analogue input for video and audio transmission. Previously, it consisted of 3 RCA sockets (yellow for video, white and red for audio) and was connected to the equipment accordingly. Now in many models you can find an AV output, which is a single connector in the “headphone” format, to which a tee cable is already connected (check availability in the package).

— COM port (RS-232). A connector originally designed for computer equipment. In TVs, it is used as a service interface: for troubleshooting, updating firmware, adjusting TV parameters and various calibrations, integrating the TV into centralized remote control systems, etc. Note that the COM port may differ in shape and contact group in different TV models. It is often designated as RS-232C.

— Coaxial (S/P-DIF). An interface for transmitting audio in digital format, which allows to transmit multi-channel audio via a single cable with an RCA connector (“tulip”). In terms of resistance to interference, this standard is somewhat inferior to the optical one (see below) — this is due to the fundamental differences between these interfaces. On the other hand, electrical cable is more reliable than optical fibre and is not as sensitive to pressure and bending.

— Optical. An output for transmission of a digital audio signal on a fibre optic cable; allows the transmission of multi-channel audio. Notable for its complete insensitivity to electromagnetic interference. On the other hand, fibre optic cable is quite fragile, it must be protected from bending and strong pressure.

— Mini-Jack (3.5 mm) for headphones. Standard 3.5mm headphone jack. Headphones can come in handy if you need to keep quiet and you can’t use the TV speakers – for example, at a later time of the day; or vice versa, if the environment is noisy and the sound of the TV is hard to hear. Most modern "ears" use a mini-Jack plug, so this connector is the standard headphone output in TVs. And in some models, this output can also be used as a linear output — for example, to connect individual speakers, a sound recording device, etc.

— Subwoofer. A separate output for connectin...g a subwoofer to a TV is a speaker for reproducing low and ultra-low frequencies. Audio systems without subwoofers usually reproduce these frequencies quite poorly. The use of subwoofer allows you to achieve the most deep and rich sound, which is especially important when watching movies with a lot of special effects or high-quality recordings from concerts. At the same time, it is worth noting that such outputs are quite rare in TVs: it is assumed that a full-format external audio system is more suitable for a demanding listener than a separate subwoofer.

— Line. Standard analogue audio interface; usually, provides the transmission of two-channel stereo. It is used primarily to connect active speakers and other audio equipment (for example, audio receivers or power amplifiers) to TVs. It can use different types of connectors, but most often it provides either a 3.5 mm mini-Jack or a pair of RCA jacks for tulip cables. Note that it is a separate line output that is meant here; in some models, this function can be performed by a 3.5 mm headphone jack (see above), but for them the presence of a line-out is not indicated.