Name: How to Connect RME Babyface Pro to MPC
Uploaded: 2022-10-16T07:00:04+00:00
Description: How to Connect RME Babyface Pro to MPC

Buy RME Babyface Pro FS

All prices 14 →

When you make a purchase through links on our site, we may receive a affiliate commission.


	Babyface Pro FS 24 Channel 192khz High Precision USB Audio Interface BABYFACEPROFS +19 / +4 dBu switch on the bottom adds a direct way to reduce the output level, thus improves SNR for sensitive active monito... morers, avoids distortion / overload, and helps to keep TotalMix FX faders near 0 dB instead of high attenuations. Full SteadyClock FS circuit as in the ADI-2 Pro FS for lowest jitter and highest jitter immunity. 3. 5 mm TRS phones output power rises from 70 mW to 90 mW. THD of both phones outputs improved by up to 10 dB. Uses same output op-amps as ADI-2 Pro now. Output impedance of 3. 5 mm TRS lowered from 2 Ohms to 0. 1 Ohms. Mic inputs SNR improved from 112. 2 dB to 113. 7 dB, TRS Line inputs SNR improved from 114 dB to 116. 3 dB (120 dBA). THD Line inputs improved by 8 dB. 6 samples less latency on the AD side by new ADC (5 samples AD, 7 samples DA. It won't get quicker. . . ). Amazon.com Delivery: in USA Report		$999.00 Buy in shop

	RME Babyface Pro FS 24-CH Multi-Format Mobile USB 2.0 High-Speed Audio Interface Take your audio recording and processing to the next level with the Babyface Pro FS 24-Channel Multi-Format Mobile USB 2.0 Hi... moregh-Speed Audio Interface. This professional-grade device, expertly crafted from a solid block of aluminum, boasts advanced analog and digital circuits designed for superior sound fidelity. The Babyface Pro FS is a testament to RME's commitment to excellence, featuring innovative energy-saving technologies that ensure uncompromised sound levels, noise reduction, and distortion control. This high-speed audio interface is equipped with a +19 / +4 dBu switch, which enhances the signal-to-noise ratio for sensitive active monitors and prevents distortion or overload. Experience the full power of the SteadyClock FS circuit, a feature that guarantees the lowest jitter and highest jitter immunity. This advanced circuitry, also found in the ADI-2 Pro FS, ensures your audio recordings are always crystal clear and free from any degradation. The Babyface Pro FS also offers improved microphone and line inputs, with a signal-to-noise ratio enhancement from 112.2 dB to 113.7 dB and 114 dB to 116.3 dB respectively. This, coupled with an 8 dB improvement in total harmonic distortion, ensures your recordings are always of the highest quality. This versatile audio interface is perfect for mobile recording, with its efficient design allowing for stable operation on USB 3 bus power and most USB 2 ports. It also features an optical TOSLINK I/O, which can be used as either an ADAT port with SMUX support or SPDIF for sessions up to 192 kHz. The Babyface Pro FS comes with RME's TotalMix FX software, a powerful digital real-time mixer that allows for independent routing and mixing of input and playback channels to all physical outputs. With the addition of TotalMix Remote, you can control your mix from anywhere in the studio using your iOS, PC, or Mac device. With its advanced features, superior sound quality, and intuitive control, the Babyface Pro FS 24-Channel Multi-Format Mobile USB 2.0 High-Speed Audio Interface is the ultimate compact audio interface for both studio and on-the-go use. Experience the RME difference today and elevate your audio recording and processing capabilities. Adorama.com Delivery: in USA On order Report		$999.00 On order

	RME Babyface Pro FS 24-Channel 192kHz Bus-Powered USB Audio Interface +19 / +4 dBu switch on the bottom adds a direct way to reduce the output level, thus improves SNR for sensitive active monito... morers, avoids distortion / overload, and helps to keep TotalMix FX faders near 0 dB instead of high attenuations. Full SteadyClock FS circuit as in the ADI-2 Pro FS for lowest jitter and highest jitter immunity. 3.5 mm TRS phones output power rises from 70 mW to 90 mW. THD of both phones outputs improved by up to 10 dB. Uses same output op-amps as ADI-2 Pro now. Output impeda Newegg.com Delivery: in USA Report		$999.00 Buy in shop

	RME Babyface Pro FS 24-Channel Audio Interface with Electro-Voice RE20 Broadcast Microphone & Boom Arm Bundle +19 / +4 dBu switch on the bottom adds a direct way to reduce the output level, thus improves SNR for sensitive active monito... morers, avoids distortion / overload, and helps to keep TotalMix FX faders near 0 dB instead of high attenuations. Full SteadyClock FS circuit as in the ADI-2 Pro FS for lowest jitter and highest jitter immunity. 3. 5 mm TRS phones output power rises from 70 mW to 90 mW. THD of both phones outputs improved by up to 10 dB. Uses same output op-amps as ADI-2 Pro now. Output impedance of 3. 5 mm TRS lowered from 2 Ohms to 0. 1 Ohms. Mic inputs SNR improved from 112. 2 dB to 113. 7 dB, TRS Line inputs SNR improved from 114 dB to 116. 3 dB (120 dBA). THD Line inputs improved Amazon.com Delivery: in USA Report		$1,299.00 Buy in shop

	RME Babyface Pro FS 24-Channel Audio Interface with Neumann TLM-102 Microphone & Neumann NDH 20 Headphones & XLR Cable Bundl +19 / +4 dBu switch on the bottom adds a direct way to reduce the output level, thus improves SNR for sensitive active monito... morers, avoids distortion / overload, and helps to keep TotalMix FX faders near 0 dB instead of high attenuations. Full SteadyClock FS circuit as in the ADI-2 Pro FS for lowest jitter and highest jitter immunity. 3. 5 mm TRS phones output power rises from 70 mW to 90 mW. THD of both phones outputs improved by up to 10 dB. Uses same output op-amps as ADI-2 Pro now. Output impedance of 3. 5 mm TRS lowered from 2 Ohms to 0. 1 Ohms. Mic inputs SNR improved from 112. 2 dB to 113. 7 dB, TRS Line inputs SNR improved from 114 dB to 116. 3 dB (120 dBA). THD Line inputs improved Amazon.com Delivery: in USA Report		$1,999.00 Buy in shop