Neumann KH 750 DSP D G

The recently engineered 10-inch long-throw driver incorporates a robust linear working magnet system integrated with ELFF™ technology (Extremely Linear Force Factor™). To safeguard against inadvertent damage, the driver is shielded by a sturdy grille, particularly pertinent given subwoofers' typical placement on the floor. The compact e... morenclosure is of a closed design, optimizing transient response by minimizing resonances. Equipped with two balanced analog XLR inputs and outputs, as well as a 192 kHz / 24-bit digital input compatible with AES3 and S/PDIF signals, the system offers versatile connectivity options. Additionally, an auto bypass function reduces power consumption to 0.3 W after 90 minutes of signal inactivity. Primarily designed for use in music, broadcast, and post-production studios, the KH 750 AES67 serves applications ranging from tracking and mixing to mastering.Neumann KH 750 AES67 Features:Physically redundant AES67 audio network interfaceDeep bass in a small spaceThe perfect complement to KH 80 DSP, KH 120 and KH 310Optional tool to align and operate a complete Neumann stereo systemNeumann KH 750 AES67 Specifications:Monitor Quantity: SingleEnclosure Type: Sealed, ShieldedTotal Power Output: 256 WattsDrivers: Subwoofer Drivers: 1x 10" (25.4 cm) ConeFrequency Range: 18 Hz to 750 Hz ± 3 dBFrequency Response: 18 Hz to 800 Hz ± 6 dBMaximum Sound Pressure Level (SPL): 105 dBDynamic Range: 119 dBATHD+N: Analog:< -100 dB, Digital:< -90 dBMaximum Input Level: +24 dBuAnalog Input Sensitivity/Gain: +2 dB to -12 dBSelf-Generated Noise: Less Than 20 dBA (at 3" / 10 cm)Protections and Limiting: Driver Protection, Limiter, Peak Limiter, Thermal LimitingCMRR: 56 dBEQ: 1x LF Shelf, 1x HF ShelfFilters: 1 x Low-PassCrossover Frequency: 80 Hz, 24 dB/Octave SlopeCrossover Type: ActivePhase Adjustment: 0 / 180° Phase Inversion, 4-Position SwitchMaximum Sampling Rate: 96 kHz / 24-BitAudio I/O: 2x XLR 3-Pin Balanced Input, 2x XLR 3-Pin Balanced OutputDigital Audio I/O: 1x BNC Coaxial AES3 Input, 1x BNC Coaxial AES3 OutputNetwork I/O: 2x RJ45 AES67 / EthernetUSB: NoWireless: NoAC Input Power: 100 to 240 VAC, 50/60 HzPower Consumption: 410 Watts (Maximum)Color: BlackOrientation: VerticalEnclosure Material: Aluminum, WoodOperating Temperature: 50 to 104°F / 10 to 40°COperating Humidity: 90%Storage Temperature: -13 to 158°F / -25 to 70°CDimensions (W x H x D): 13 x 15.1 x 15.1" / 33 x 38.3 x 38.3 cmWeight: 43.0 lb / 19.5 kg (Each) Neumann KH 750 AES67 Active DSP Subwoofer with AES 67 Input.

Designed as the rightful successor to Neumann's KH805, the KH750 is the ideal choice for smaller rooms and smaller studio monitors. With its unique and flexible 2.0/0.1 Bass Manager this allows the KH750DSP subwoofer to be used in many different system configurations. The back panel features analog and digital inputs and outputs, four routing modes... more, fourth-order DSP crossovers and adaptable acoustical controls to allow for seamless system integration.Available for order in late April, 2019 - the KH750DSP subwoofer is designed to complement Neumann’s extensive range of monitors, and can be used in music, broadcast, and post production studios for tracking, mixing, and mastering.Via standard IP networking, Neumann.Control gives full access to all the functions of the KH750DSP Subwoofer that are not currently available via the back panel. Systems of loudspeakers can be defined, from mono to 3D, aligned for a good in-room sound, and then operated centrally: Setup, Align, Operate. At last, you do not need to be an expert to bring a subwoofer into a room, even a small room.ApplicationsDecreases the bass extension of the monitoring systemIncreases the maximum SPL of loudspeakersDecreases harmonic and intermodulation distortion of loudspeakersReproduces the LFE channelReproduces the “Sub&rdquo; signal of a bass managed multichannel sourceMakes a Plane Wave Bass Array™ systemWorks as an extension for KH 810, KH 870 and KH 805 subwoofer systemsIncludes(1) KH750DSPDG(3) Mains cables (EU, UK, US)(1) Quick guide(1) Safety bookletFeaturesActive DSP Subwoofer10" driver, 48.4liters256W, 105dB SPL18 - 300Hz, metallic anthraciteSpecificationsTHD+N: analog, digital:70Hz)Bass capability: Max. SPL in half space at 3% THD @ 1m (averaged between 50Hz and 100Hz): 105.0dB SPLMax. long term SPL with pink noise @ 2.3m, in typical listening conditions (single / pair full range): n/aMax. long term SPL with pink noise @ 2.3m, in typical listening conditions (single / pair with subwoofer): n/aAnalog input(s): 2 x XLR: analog electronically balancedAnalog input impedance: >13kΩMax. input level:56dB @ 15kHzCrosstalk (1kHz), level matching:120dB(A)Dynamic range D-A: >123dB(A)Digital sensitivity: -18dBFS = 100dB SPL @ 1mLatency: 1.5ms (A-D-A linear phase); 1.2ms (D-A linear phase)Delay: User adjustable delay range: 0 ... 100ms and 2 x 0 ... 20.8msDelay: Resolution: time; distance: 0.1ms; 3.44cm (1 3/8”)Delay: Max. frames Audio-video synchronization (lip sync): 2.5(40ms) frames; 3(33ms) framesDelay: Time-of-flight maximum distance: 2 x 7.16m (23' 5")Controller design: Digital; activeCrossover frequency: 80Hz fixed or 60 - 100Hz via Neumann.ControlCrossover slope: 24dB/oct; 4th orderPhase: 0; 45; 90; 135 under 0/180degEqualization: via Neumann.Control software: 8 x full parametric IIR + low / high shelf global balanceFIR phase correction: For connected analog loudspeakers: Linear phase (170Hz - 16kHz; +/- 45°)Protection circuitry: Driver (thermo