The JBL CBT1000 represents the next-generation in pattern control consistency utilizing adjustable vertical coverage and a ta... morepered horizontal waveguide to increase the versatility of aiming the coverage of the loudspeaker to more accurately map to the room geometry in a wide variety of listening spaces. It features asymmetrical vertical coverage which sends more sound toward far area of room to make front-to-back sound levels more consistent.IncludesTwo-piece swivel (pan)/tilt wall bracketFeaturesAsymmetrical vertical coverage sends more soundtoward far area of room to make front-to-back sound levels more consistentComponents: Twenty-four (24) 25 mm (1 in)extra-high-power soft dome tweeters and six (6) 165 mm (6-1/2”) high-excursionLF drivers arranged coaxiallyConstant Beamwidth Technology™ provides constantdirectivity up to the highest frequencies and reduces out of coverage lobingVertical pattern coverage is individually adjustablethrough a range of four (4) “Pattern Up” angles and four (4) “Pattern Down”coverage angles for a total of sixteen (16) different coverage combinations,all without the use of external DSP processingPatent-pending Tapered Horizontal Waveguide providesa continuously varying horizontal dispersion (very wide for short-throw,narrower for long-throw) delivering superior coverage in both the front andrear corners of a roomSingle-speaker room coverage at high SPL, with littleover-splash and strong bass response down to below 40 HzSwitchable voicing provides flat response in musicmode or mid-range presence peak in speech modeSwivel (pan)/tilt wall bracket includedSpecificationsPower: 1000 W continuous, 2000 W program, 4000 W peak @ 4 ohmsSystem:ComponentsSix (6) 165 mm (6.5 in) LF driversTwenty-four (24) 25 mm (1 in) HF driversFrequency Range (-10 dB): 45 Hz – 20 kHzSensitivity (2.83V@ 1m)1, 2:102 dB (at highest sensitivity setting: “Point” pattern up, “Point” pattern down, “Speech” voicing, in free space)95 dB (at lowest sensitivity setting: “Medium” pattern up, “Downfill” pattern down, “Music” voicing in free space)Nominal Impedance: 4 ohms (4 ohms above 1 kHz; 8 ohms below 800 Hz)Power Capacity:1500 W (6000 W peak), 2 hrs1000 W (4000 W peak), 100 hrsMaximum Input Voltage: 65.0 Volts RMS (2 hrs), 130.0 Volts PeakTransducersLow Frequency Drivers: 6 pcs, 165 mm (6.5 in) drivers, lightweight neodymium motors, 50 mm (2.0 in) diameter voice coils, copper-capped pole tips to minimize flux modulation and linearize inductance, 16 mm (0.63 in) long coil for high linear drive and high power handling, damped blended textile surround, coated cones for moisture, UV and salt resistance. Magnetically shieldedHigh Frequency Drivers: 24 pcs, 25 mm (1 in) drivers, neodymium, encased magnet and coated diaphragm for moisture, UV, and salt resistanceEnclosure: Fiberglass reinforced ABS cabinet, powder coated 1050 aluminum
Fullcompass.comDelivery: in USA
Report