JBL AWC82

Highly weather-resistant IP56 rating Consistent 120° x 120° broadband pattern control 200 mm (8 in) woofer with Kevlar-reinforced cone and 50 mm (2 in) voice coil 25 mm (1 in) exit compression driver with unique patented design and high temperature polymer diaphragm Extraordinary clarity for speech, with extended frequency response for music O... moreutput Wattage: 250 W

The AWC82 is a compact, coaxial-driver, 2-way, highly weather-resistant full-range loudspeaker system which is ideal for speech and music-fill in a wide variety of applications, including sports facilities, racetracks, stadiums, fairgrounds, rodeos, skating rinks, themed entertainment venues, cruise ships, water parks, outdoor background music/pagi... moreng systems, swimming pools, and a wide variety of other outdoor or indoor venue types.The AWC82 is comprised of a high-power coaxial 200 mm (8 in) low frequency driver and 25 mm (1 in) high frequency compression driver. The co-axial design utilizes a unique tapered pole-piece design and transitions to the cone of the low frequency driver as a large diameter pattern control horn for the high frequencies, both eliminating high-frequency beaming which is common among this category of speaker and extending pattern control to the lowest possible frequencies. The result is a coaxial speaker with wide, extremely consistent 120° coverage on a broadband basis.Component features include a Kevlar-reinforced low frequency cone for reliability, well-damped surround for smooth frequency response, high temperature voice coil and a reduced distortion design through saturated-gap magnet geometry. The high frequency compression driver features a unique patented design, high temperature polymer diaphragm, and fluid-cooling for high output levels with low distortion.The paintable enclosure is constructed of thick, ABS plus fiberglass and is heavily braced to maximize low-frequency performance. The corrosion-resistant zinc-rich extra-thick powder coated steel grille is backed with open cell foam and high thread-count mesh, providing excellent protection in the harshest environments. The system is rated IP-56, per IEC529 when installed at minimum 5° down-tilt.The system is equipped with a 200W 70V/100V multi-tap transformer. Connection is made via outdoor-rated terminals in a recessed terminal cup. A protective terminal compartment cover is included, along with gland nut, which forms a water-tight seal with round-jacketed cable having outside diameter between 4 mm (0.16 in) and 9 mm (0.36 in).A heavy-duty weather-capable zinc-rich, thick powder coated U-type mounting bracket is included.FeaturesHighly weather-resistant IP56 ratingConsistent 120° x 120° broadband pattern controlComponents:Extraordinary clarity for speech, with extended frequency response formusic.Advanced high-slope crossover network for constant coverage and smooth,natural midrange.250 Watt power handling (average continuous pink noise) with highsensitivity provides high SPL capability.High-power passive crossover network.Overload protection80 Hz – 20 kHz frequency response.200 Watt 70V/100V multi-tap (built-in transformer) or direct 8Ohmlow-impedance.SpecificationsFrequency Range (-10 dB): 80 Hz – 20 kHzFrequency Response (±3 dB): 100 Hz – 20 kHzCoverage Pattern: 120° x 120°Directivity Factor (Q): 8.1 (1 k