Cooler Master Silencio S400 black (MCS-S400-KN5N-S00)
 | Outdated Product $416.00 Small micro-ATX case with good noise reduction system. The case has soundproofing inserts on all sides. On the side covers, the sound insulation is glued to the inside; it is not removable. Soundproofing removable pads are used on the top and front. The facade is hung on rotary hinges, the front door opens to an angle of 100˚. If the facade is opened, there is access to the front air intake with a high-quality nylon filter. Additionally, there is a cover on the front for a 5.25″ drive. The Cooler Master Silencio S400 computer case supports the ability to simultaneously install a large number of memory drives. The HDD cage, which is mounted in the power supply compartment, can accommodate two full-size 3.5″ hard drives. You can place two 2.5″ drives on the upper partition of the lower secti...on. On the back of the tray there are two slots for a 2.5″ SSD. This case will accommodate an effective CPU cooling system; the height of the processor tower is limited to 166 mm. When installing a discrete video card, you can use a solution up to 319 mm long. Under the top cover there is space for a 240 mm SVO radiator, but in this case you will have to remove the top soundproofing panel. The interface block has an SD card reader. |
 |
Small micro-ATX case with good noise reduction system. The case has soundproofing inserts on all sides. On the side covers, the sound insulation is glued to the inside; it is not removable. Soundproofing removable pads are used on the top and front. The facade is hung on rotary hinges, the front door opens to an angle of 100˚. If the facade is opened, there is access to the front air intake with a high-quality nylon filter.
Additionally, there is a cover on the front for a 5.25″ drive. The Cooler Master Silencio S400 computer case supports the ability to simultaneously install a large number of memory drives. The HDD cage, which is mounted in the power supply compartment, can accommodate two full-size 3.5″ hard drives. You can place two 2.5″ drives on the upper partition of the lower section. On the back of the tray there are two slots for a 2.5″ SSD. This case will accommodate an effective CPU cooling system; the height of the processor tower is limited to 166 mm. When installing a discrete video card, you can use a solution up to 319 mm long. Under the top cover there is space for a 240 mm SVO radiator, but in this case you will have to remove the top soundproofing panel. The interface block has an SD card reader.
