from $839.99 hammer drilling, 3600 bpm, without a hit, 760 rpm, chiselling, 900 W, 4.2 J, quick cartridge change, weight 4.7 kg
from $278.00 reciprocating, cordless, LED light, weight 2.5 kg
from $154.59 laser level, range: 15 m, accuracy 0.3 mm/m, laser: red, class 2, auto power off
from $193.79 rotary engraver, cordless, 35000 rpm, LED light, weight: 0.63 kg
from $245.00 cordless, from 800 stroke/min, up to 3800 stroke/min, stroke: 26 mm, pendulum action, dust blower, LED light, weight: 2 kg
from $399.00 cordless, 18 В, no battery, planing: width 82 mm, depth 1.6 mm, double-sided knives, dual dust out system
from $605.00 vertical, 1600 W, up to 25000 rpm, stroke: 76 mm, soft start, fine height adjustment
from $229.00 angle grinder, cordless, without battery, saw blade 125 mm, 9000 rpm, keyless change, mount X-LOCK X-LOCK fastening system, motor protection, kickback protection, additional handle
from $169.00 drill, gun, 1200/3200 rpm, cartridge: key, Ø 13 mm, impact mode, reverse, power supply: mains (110 V)
from $1,199.00 30 J, 1300 bpm, cartridge: SDS Hex, anti-vibration, 17.2 kg
from $175.74 hammer drilling, 4000 bpm, without a hit, 900 rpm, chiselling, 800 W, 2.7 J, weight 2.7 kg
from $598.49 circular, electric saw, 1800 W, bar/blade 254 mm, weight 24.4 kg
from $181.49 laser level, range: 15 m, accuracy 0.3 mm/m, laser: green / red, class 2, auto power off
from $308.22 oscillating multi-tool, cordless, brushless, 20000 number/min, weight: 0.81 kg
from $103.99 cordless, from 1500 stroke/min, up to 2800 stroke/min, stroke: 19 mm, pendulum action, LED light, weight: 1.36 kg
from $239.00 cordless, 18 В, no battery, planing: width 82 mm, depth 2.6 mm, double-sided knives, shoe, dual dust out system
from $249.00 angle grinder, cordless, without battery, saw blade 125 mm, 11000 rpm, soft start, motor protection, additional handle
from $220.42 drill driver, gun, 350/1300 rpm, cartridge: keyless, Ø 10 mm, reverse, power supply: battery, 12 H, 2 Ah, 2, case
from $559.00 7.6 J, 2800 bpm, cartridge: SDS Max, speed control, no chisel, 5.6 kg
from $570.83 hammer drilling, 1700 – 2900 bpm, 170 – 340 rpm, chiselling, 8.8 J, consistent speed, mains (110 V), weight 6.89 kg
Bold claim - Professional)))
Battery 2 Ah - no comments needed. It was bought on sale, so don't critique too harshly)) 5-6 cuts of 12 mm plywood at 600 mm - one bar left. For a couple of years of home projects, it might be enough. But 35 bucks for nothing - quite pricey. Get a 6 Ah one, I think you'll be better off. Planning to find a dead battery and use it for stationary power from 220V.
You can't make a straight cut without a guide, understandably - the disc diameter isn't meant for that.
The zero-cut window doesn't match reality, it needs a slight adjustment.
The included blade chips the cutting edge on both the front and back side, whether on plywood or chipboard, no matter the speed. Buy a 32-tooth blade, I think it will be better. There's an 80-tooth one on Ali.
The bolt-tightening wrench for the guide is a regular L-shaped one. A screwdriver is much more convenient.
The vacuum cleaner adapter is a joke))) you have to lay down coverings and still end up collecting sawdust, at least it doesn't scatter around the whole room. So, I don't recommend it for home use(((
There's no lock for the protective cover. Understandable for safety and all, but it would be useful in some cases. A regular rubber band does the trick.
Time will tell about durability)))
Last photo - cut with a Graff 125 disc, 3 teeth.