Cables 4 mm²

Raco covers are manufactured from durable pre-galvanized steel and are designed to house and protect electrical wiring, switches and receptacles. All steel covers are UL and CSA listed. All covers have captive device screws.

Cantex EZ08ED EZ BOX 2-gang cover provides a 5/8 inch rise or extension for any Cantex 4 inch square EZ Box, 4 inch square ENT box or 2-gang ENT boxes.

Octagon flat cover is used to close off a 4 in. octagon box as a junction box, add a wiring device, or mount a light fixture. This cover features keyhole mounting holes for easy installation. It provides a convenient way to cover or terminate exposed electrical wire.

Cantex EZ04ES EZ Box 1-gang cover provides a 5/8 inch rise or extension for any Cantex 4 inch square EZ Box, 4 inch square ENT box or 2-gang ENT boxes. These risers easily reduce Cantex 4 inch square or 2-gang ENT boxes to single-gang usage.

Sigma's weatherproof round blank covers are used to protect junction boxes or boxes not in use. These non-metallic flat covers compliment 4-in. weatherproof round boxes installed in wet, damp or dry locations. Cover includes hardware and gasket.

Sigma's weatherproof round blank covers are used to protect junction boxes or boxes not in use. These non-metallic flat covers compliment 4-in. weatherproof round boxes installed in wet, damp or dry locations. Cover includes hardware and gasket.

Sigma's weatherproof one-hole lampholder covers provide mounting locations for a single lampholder. These covers compliment 4-in. round weatherproof boxes and are suitable for installation in wet, damp or dry locations. Their rugged, die-cast construction prevents moisture penetration and is powder coated for corrosion resistance. Covers include hardware and gasket.

Covers are manufactured from durable pre-galvanized steel and are designed to house and protect electrical wiring, switches and receptacles. All steel covers are UL listed and acceptable for use in 2-hour fire rated walls and ceilings. Device mounting holes are pre-tapped to accept device fasteners.

Sigma's weatherproof one-hole lampholder covers provide mounting locations for a single lampholder. These covers compliment 4-in. round weatherproof boxes and are suitable for installation in wet, damp or dry locations. Their rugged, die-cast construction prevents moisture penetration and is powder coated for corrosion resistance. Covers include hardware and gasket.

Sigma's weatherproof round blank covers are used to protect junction boxes or boxes not in use. Stamped steel blank covers are powder coated for maximum corrosion resistance and compliment 4-in round weatherproof boxes installed in wet, damp or dry locations. Cover includes hardware and gasket.

Sigma's weatherproof round blank covers are used to protect junction boxes or boxes not in use. Stamped steel blank covers are powder coated for maximum corrosion resistance and compliment 4-in round weatherproof boxes installed in wet, damp or dry locations. Cover includes hardware and gasket.

Sigma's weatherproof three-hole lampholder covers provide mounting locations for up to three lampholders. These non-metallic covers compliment 4-in. round weatherproof boxes and are suitable for installation in wet, damp or dry locations. Covers include hardware and gasket.

Sigma's weatherproof round blank covers are used to protect junction boxes or boxes not in use. Stamped steel blank covers are powder coated for maximum corrosion resistance and compliment 4-in round weatherproof boxes installed in wet, damp or dry locations. Cover includes hardware and gasket.

Sigma's weatherproof two-gang blank covers are used to protect junction boxes or boxes not in use. These non-metallic flat covers compliment weatherproof two-gang boxes installed in wet, damp or dry locations. Cover includes hardware and gasket.

Sigma's weatherproof one-hole lampholder covers provide mounting locations for a single lampholder. These covers compliment 4-in. round weatherproof boxes and are suitable for installation in wet, damp or dry locations. Their rugged, die-cast construction prevents moisture penetration and is powder coated for corrosion resistance. Covers include hardware and gasket.

4 in. Square Crushed Corner Covers - Raised 1/2 in. Universal for 1 Device: 1 GFCI, 1 Duplex, or 1 Toggle (Insert Plates). RACO® surface covers are used to support switches or receptacles in areas where the box is surface mounted or positioned in exposed work applications. RACO® exposed work covers include required hardware for mounting the receptacle(s) * RACO® exposed work covers meet the requirements of the 2014 NEC Article 250.146(A). No bonding jumper is required for covers with: (1) Crushed corners (2) Two or more device attachment screws (3) A lockwasher or equivalent * Hardware and cover are packed in a poly-bag with printed catalog number, compliances and installation instructions

Exposed work covers are manufactured from durable pre-galvanized steel and are designed to house and protect electrical wiring, switches and receptacles in surface mounted or exposed work applications. All steel covers are UL listed and acceptable for use in 2-hour fire rated walls and ceilings. Mounting provisions are designed to make installation efficient.

Raco exposed work covers are manufactured from durable pre-galvanized steel and are designed to house and protect electrical wiring, switches and receptacles in surface mounted or exposed work applications. All steel covers are UL listed and acceptable for use in 2-hour fire rated walls and ceilings. Mounting provisions are designed to make installation efficient.

4 in. Square Crushed Corner Covers - Raised 1/2 in. Universal for 1 Device: 2 GFCI, 2 Duplex, or 2 Toggle (Insert Plates). RACO® surface covers are used to support switches or receptacles in areas where the box is surface mounted or positioned in exposed work applications. RACO® exposed work covers include required hardware for mounting the receptacle(s) * RACO® exposed work covers meet the requirements of the 2014 NEC Article 250.146(A). No bonding jumper is required for covers with: (1) Crushed corners (2) Two or more device attachment screws (3) A lockwasher or equivalent * Hardware and cover are packed in a poly-bag with printed catalog number, compliances and installation instructions

Sigma's weatherproof two-gang blank covers are used to protect junction boxes or boxes not in use. These non-metallic flat covers compliment weatherproof two-gang boxes installed in wet, damp or dry locations. Cover includes hardware and gasket.

Sigma's weatherproof two-gang blank covers are used to protect junction boxes or boxes not in use. Stamped steel blank covers are powder coated for maximum corrosion resistance and compliment two-gang weatherproof boxes installed in wet, damp or dry locations. Cover includes hardware and gasket.

Raco covers are manufactured from durable pre-galvanized steel and are designed to house and protect electrical wiring, switches and receptacles. All steel covers are UL listed and acceptable for use in 2-hour fire rated walls and ceilings. Device mounting holes are pre-tapped to accept device fasteners.