Cables 1 mm²

The Sigma ProConnex Rain-Tight EMT Compression Connectors are used to secure and terminate steel EMT conduit to an outlet box or enclosure in a dry or damp location. They are recommended for indoor and outdoor applications and approved for concrete-tight applications.

The Sigma ProConnex Rain-Tight EMT Compression Couplings are used to connect two lengths of steel EMT conduit. These die-cast zinc couplings are approved for concrete-tight and rain-tight applications.

The Sigma ProConnex Reducing Washers are used to decrease the size of a knockout in a steel outlet box or metal enclosure. Two of these zinc-plated steel reducing washers are required for each knockout. They are embossed for self-centering and easy installation.

The Sigma ProConnex Screw-In Couplings are used to join two lengths of FMC where minimum spacing between conduits is desired. These die-cast connectors are for dry location applications.

The Sigma ProConnex knockout seals are used to close exposed holes in an outlet box or metal enclosure. These knock-out seals are of zinc-plated steel construction.

The Sigma ProConnex Conduit Locknuts are used for securing Rigid conduit, IMC and other threaded connectors to a steel outlet box or metal enclosure. These zinc-plated steel locknuts are recommended for indoor applications.

The Sigma ProConnex AC/MC Connectors are used to terminate AC or MC cable to a knockout in a dry location box or enclosure. These die-cast connectors are equipped with a tri-combo screw and are suitable for aluminum or steel conduit.

Cantex Adapter in gray color is made of rigid PVC for corrosion resistance and added durability. Fitting has two female ends, one end is threaded and the other is solvent weld. The SCH 40/80 measures 1-7/16 Inch x 1 Inch and has a trade size of 1/2-14 Inch. It is used for transition of threaded metal conduit to PVC conduit. Adapter is UL listed, CSA certified and meets rating.

Adapter used with the hub inside a box or enclosure. The cylinder protrudes through a hole in the box wall and is solvent welded to a female fitting outside the box or enclosure.

A connector used to join lengths of conduit pipe. The fitting consist of two female ends with a center stop. Both pieces of pipe should seat at the stop for proper positioning.

The Sigma ProConnex Conduit Nipples are used in conjunction with locknuts to provide a short raceway between two outlet boxes or metal enclosures.

Male Terminal Adapters are connectors used to transition from a spigot end PVC conduit to a threaded metal or PVC plastic female bell end. Male Terminal Adapters can also be used to connect PVC conduit to a box or other threaded body with use of a lock nut. The fittings consist of one solvent weld female end and one threaded male end. Both ends will fit the same diameter conduit.

A section of PVC Schedule 40 conduit which as been heated and bent to effect a 90 degree change in direction in a conduit run. Both ends of the bend are spigot (plain) end. Both ends are solvent weld. Can be used above ground or buried and are suitable for concrete encasement.

The Sigma ProConnex knockout seals are used to close exposed holes in an outlet box or metal enclosure. These knock-out seals are of zinc-plated steel construction.

The Sigma ProConnex Squeeze Connectors are used to terminate AC, MC or FMC/RWFMC to a knockout in a dry location box or enclosure. These die-cast zinc connectors are equipped with a tri-combo screw and are suitable for aluminum or steel cable and conduit.

The Sigma ProConnex Reducing Washers are used to decrease the size of a knockout in a steel outlet box or metal enclosure. Two of these zinc-plated steel reducing washers are required for each knockout. They are embossed for self-centering and easy installation.

Adapter used with the hub inside a box or enclosure. The cylinder protrudes through a hole in the box wall and is solvent welded to a female fitting outside the box or enclosure.

Cantex 5140045 is a 1 in. Schedule 40 female adapter used to transition threaded metal or PVC conduit with one end threaded and the other end socket solvent weld.

A connector used to join lengths of conduit pipe. The fitting consist of two female ends with a center stop. Both pieces of pipe should seat at the stop for proper positioning.

Cantex 5140106 is a 1-1/4 in. Male terminal adapter which is a connector used to transition from a spigot end PVC conduit to a threaded metal or PVC plastic female bell end.

A connector used to join lengths of conduit pipe. The fitting consist of two female ends with a center stop. Both pieces of pipe should seat at the stop for proper positioning.

Cantex 5140107 is a 1-1/2 in. Male Terminal Adapter which is a connector used to transition from a spigot end PVC conduit to a threaded metal or PVC plastic female bell end.

Cantex 5140047 is a 1-1/2 in. schedule 40 female adapter used to transition threaded metal or PVC conduit with one end threaded and the other end socket solvent weld.

Cantex 45-deg Conduit elbow in gray color is made of PVC. It has standard conduit bell on one end while the other end is a spigot end. Conduit elbow can be used above ground or buried. It is suitable for concrete encasement.