Other Bathroom Accessories Watts

Full port ball and waste valve is lead free. The copper silicon alloy ball valves feature a side drain port to drain or vent downstream line when the valve is in the off position. The full port orifice ensures maximum flow capacity and its ball is wiped clean during each operation of the valve.

Full port ball and waste valve is lead free. The copper silicon alloy ball valves feature a side drain port to drain or vent downstream line when the valve is in the off position. The full port orifice ensures maximum flow capacity and its ball is wiped clean during each operation of the valve.

Feed water pressure regulators are designed to fill the boiler and system piping with water and to maintain water pressure in the system at all times. These valves also provide make up water to the system in the event of system leaks.

Series LF25AUB-Z3 lead free water pressure reducing valves are used in commercial and residential applications to reduce incoming water pressure for protection of plumbing system components and to reduce water consumption. It consists of a lead free copper silicon alloy body construction, union inlet connection, integral stainless steel strainer and high temperature resistant reinforced diaphragm for hot water. The series LF25AUB-Z3 is available with a variety of end connections including threaded, solder, PEX, quick-connect and CPVC with both union and double union connections.

The hot water extender tempering valves are used in residential water supply applications to mix cold and hot water to extend capacity of water heater storage tanks and hot water boiler tankless heaters.

Series LF622UF Lead Free Full Port Union End Ball Valves are designed for steam service applications. They are ideal for throttling and balancing of nonabrasive fluids where minimum flow is 20% to 100% of valve capacity.

Water pressure reducing valves are used in commercial and residential applications to reduce incoming water pressure for protection of plumbing system components and to reduce water consumption. It consists of a lead free cast copper silicon alloy body construction, stainless steel integral strainer, thermoplastic seat and cage, thermal expansion bypass and sealed spring cage for waterworks pit installations. The LFN45B series is available in a variety of end connections including threaded, solder, PEX, quick-connect and CPVC with both union and double union connections.

Full port ball and waste valve is lead free. The copper silicon alloy ball valves feature a side drain port to drain or vent downstream line when the valve is in the off position. The full port orifice ensures maximum flow capacity and its ball is wiped clean during each operation of the valve.

Full port ball and waste valve is lead free. The copper silicon alloy ball valves feature a side drain port to drain or vent downstream line when the valve is in the off position. The full port orifice ensures maximum flow capacity and its ball is wiped clean during each operation of the valve.

Series LF25AUB-Z3 lead free water pressure reducing valves are used in commercial and residential applications to reduce incoming water pressure for protection of plumbing system components and to reduce water consumption. It consists of a lead free copper silicon alloy body construction, union inlet connection, integral stainless steel strainer and high temperature resistant reinforced diaphragm for hot water. The series LF25AUB-Z3 is available with a variety of end connections including threaded, solder, PEX, quick-connect and CPVC with both union and double union connections.

Series LF25AUB-Z3 lead free water pressure reducing valves are used in commercial and residential applications to reduce incoming water pressure for protection of plumbing system components and to reduce water consumption. It consists of a lead free copper silicon alloy body construction, union inlet connection, integral stainless steel strainer and high temperature resistant reinforced diaphragm for hot water. The series LF25AUB-Z3 is available with a variety of end connections including threaded, solder, PEX, quick-connect and CPVC with both union and double union connections.

Water pressure reducing valves are used in commercial and residential applications to reduce incoming water pressure for protection of plumbing system components and to reduce water consumption. It consists of a lead free cast copper silicon alloy body construction, stainless steel integral strainer, thermoplastic seat and cage, thermal expansion bypass and sealed spring cage for waterworks pit installations. The LFN45B series is available in a variety of end connections including threaded, solder, PEX, quick-connect and CPVC with both union and double union connections.

The valve can be used for hot water space heating boiler applications to protect against excessive pressure. It features an iron body with a forged bronze inlet, non-metallic disc-to-metal seating, and a test lever. Includes a nonrestrictive discharge drain line flood sensor with SentryPlus Alert(R) technology to detect excessive water discharges from the relief valve. Sensor activation requires the purchase of an activation kit that can be connected to existing building management systems or the Watts Cellular Gateway.

Series LFMMV Thermostatic Mixing Valves maintain and limit mixed hot water to a desired, selectable temperature. The LFMMV series can be set to any temperature between 80 degrees F. and 120 degrees F. with flow rates as low as 0.5 gpm and as high as 12 gpm. This mixing valve series is listed under ASSE 1017 for valves used in hot water source applications, ASSE 1069 for single-pipe, tempered water applications and ASSE 1070 for valves used in individual or multiple fixture applications. The LFMMV feature lead free construction to comply with Lead Free installation requirements. The superior flow characteristics of this valve provide accurate temperature control, plus or minus 3 degrees F, with …

Series LF25AUB-Z3 lead free water pressure reducing valves are used in commercial and residential applications to reduce incoming water pressure for protection of plumbing system components and to reduce water consumption. It consists of a lead free copper silicon alloy body construction, union inlet connection, integral stainless steel strainer and high temperature resistant reinforced diaphragm for hot water. The series LF25AUB-Z3 is available with a variety of end connections including threaded, solder, PEX, quick-connect and CPVC with both union and double union connections.

Series 335 ASME rated Boiler Pressure Relief Valves were developed to fill the hydronic industry's need for a smaller valve for OEM use on popular size boilers up to 510,000 BTU at 30psi (2.11 bar). The compact design, all bronze construction and modern appearance make them an ideal choice for a wide variety of smaller size OEM boilers. ASME Section IV at 30 psi set point.

This 3/4 inch LFN55BM1-U water pressure reducing valve is used in commercial and residential applications to reduce incoming water pressure for protection of plumbing system components and to reduce water consumption. It consists of a lead free brass body construction, NPT threaded union female inlet by NPT female outlet connection, integral stainless steel strainer, thermoplastic seat, bronze sealed spring cage for accessible outdoor waterworks or pit installations and a thermal expansion bypass.

This 3/4 inch lead free calibrated pressure relief valve is designed for use only as protection from the build up of excessive pressure in systems containing water, oil or air. It features a lead free brass body with 3/4 inch NPT male inlet and 1/2 inch NPT female (drain) outlet, stainless steel spring, lead free brass bonnet and a Buna-N disc and O-ring.

Series 100XL Temperature and Pressure Relief Valves are used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. They feature a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating and a test lever.

Series LF100XL 150/210 Lead Free Temperature and Pressure Relief Valves are used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 100,000 BTU/hr. They feature a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating and a test lever. Series 100XL is ASME rated and CSA listed.

LFL100XL Lead Free Extended Shank Temperature and Pressure Relief Valve. Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. They feature an extended shank for installation on water heaters with extra thick insulation as well as a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating and a test lever. Suitable for water heaters with up to 2 in. (51mm) of insulation.

Hose connection vacuum breakers permit the attachment of portable hoses to hose thread faucets and prevent the reverse flow of polluted water from entering into the potable water supply.