Other Bathroom Accessories Sioux

1-1/2 inch Copper Plated Sioux Chief 515 series clevis hangers shall be used where necessary to suspend piping overhead using 3/8 inch threaded rod and in accordance with national code requirements on light commercial applications. Hanger shall comply with MSS-SP58 Type 1 and WWH-171E Type 12.

Recommended for the suspension of stationary non insulated pipe lines allow for piping runs close to ceiling or walls. Malleable iron construction for use with 3/8 inch all thread rod.

Recommended for the suspension of stationary non insulated pipe lines allow for piping runs close to ceiling or walls. Malleable iron construction for use with 3/8 inch all thread rod.

1/2 inch CTS (bag of 10) Sioux Chief 501 series tube strap shall be used where necessary to fasten or secure CTS tubing and IPS piping in residential or commercial applications. Steel tube straps are coated with a smooth copper finish. Mount to wood, metal studs or joists using nail or screw in both holes. Minimum recommended nail penetration is 3/4 inch. Refer to National or Local plumbing codes for proper hanger spacing requirements.

Sioux Chief 516 series split ring hangers shall be used where necessary to suspend or support IPS or CTS piping from threaded rod in accordance with national code requirements for light commercial applications. Hanger shall comply with MSS-SP58 Type 12 and WWH-171D Type 25. It is a robust and reliable plumbing solution, crafted from durable ductile iron with a sleek copper-plated finish. Designed to securely suspend 1/2 in. pipes, its epoxy-coated interior ensures a firm, corrosion-resistant grip, providing steadfast support in even the most demanding installations. Easy to install with its split ring design, this hanger combines functionality with a polished aesthetic, making it an essential …

Recommended for the suspension of stationary non insulated pipe lines allow for piping runs close to ceiling or walls. Malleable iron construction for use with 3/8 inch all thread rod.

Sioux Chief 506 series wire pipe hooks shall be used where necessary to secure CTS tubing and IPS piping overhead from ceiling or floor joists in residential applications. Wire pipe hooks shall be made of 10 gauge material and offered in plain steel, copper plated steel or vinyl coated steel options. Wire pipe hooks shall feature 20 degree inch wow-bend inch at the prong for easier installation into the wood joist.

1/2 inch x 6 inch (5 pack) Sioux Chief 506 series wire pipe hooks shall be used where necessary to secure IPS piping overhead from ceiling or floor joists in residential applications. Wire pipe hooks shall be made of 10 gauge material. Wire pipe hooks shall feature 20 degree wow-bend at the prong for easier installation into the wood joist.

Sioux Chief 516 series split ring hangers shall be used where necessary to suspend or support IPS or CTS piping from threaded rod in accordance with national code requirements for light commercial applications. Hanger shall comply with MSS-SP58 Type 12 and WWH-171D Type 25. It is a robust and reliable plumbing solution, crafted from durable ductile iron with a sleek copper-plated finish. Designed to securely suspend 1-in. pipes, its epoxy-coated interior ensures a firm, corrosion-resistant grip, providing steadfast support in even the most demanding installations. Easy to install with its split ring design, this hanger combines functionality with a polished aesthetic, making it an essential …

Sioux Chief got its start packaging specialty fasteners and other items geared toward residential plumbing jobs. In the early 60s, Ed borrowed the idea of spinning copper tube closed for simple air chambers and adapted it for stub outs which could be used by plumbers. This preformed copper tube saved plumbers from sweat soldering tube caps onto their copper tube for water shock and test-off purposes. By 1975 a heavy emphasis on sales and new product development began when Ed's two eldest sons purchased the corporation and took over operations. Since then Sioux Chief has welcomed the third generation of family members to the team and has introduced a wide range of innovative products.

Sioux Chief 803 series backup float valve shall be used where necessary in drainage systems. Backup valve shall install into vertically oriented drainage pipe and allow water to drain through freely under normal operation. During back-up situations, float shall seal valve and prevent water backup through drain fixture.

Sioux Chief 515 series clevis hangers shall be used where necessary to suspend piping overhead using a 3/8 inch threaded rod and in accordance with national code requirements on light commercial applications. Hanger shall comply with MSS-SP58 Type 1 and WWH-171E Type 12.

Sioux Chief 516 series split ring hangers shall be used where necessary to suspend or support IPS or CTS piping from the threaded rods in accordance with national code requirements for light commercial applications.

"Sioux Chief plastic hanger strap shall be used where necessary to support DWV pipe and should be installed in accordance with national codes pertaining to hanger spacing and slope requirements. The plastic hanger strap features 1/8"" diameter holes spaced 2-1/2"" apart. Plastic hanger strap shall conform to the ASTM D-5857."

10 foot Sioux Chief plastic hanger strap shall be used where necessary to support DWV pipe and should be installed in accordance with national codes pertaining to hanger spacing and slope requirements. The plastic hanger strap features 1/8 inch diameter holes spaced 2-1/2 inch apart. Plastic hanger strap shall conform to the ASTMD – 5857.

Sioux Chief plastic hanger strap shall be used where necessary to support DWV pipe and should be installed in accordance with national codes pertaining to hanger spacing and slope requirements. The plastic hanger strap features 1/8 inch diameter holes spaced 2-1/2 inch apart. Plastic hanger strap shall conform to the ASTM D-5 8 57.

3/4 inch Copper Plated Sioux Chief 515 series clevis hangers shall be used where necessary to suspend piping overhead using 3/8 inch threaded rod and in accordance with national code requirements on light commercial applications. Hanger shall comply with MSS-SP58 Type 1 and WWH-171E Type 12.

3/4 inch CTS (bag of 10) Sioux Chief 501 series tube strap shall be used where necessary to fasten or secure CTS tubing and IPS piping in residential or commercial applications. Steel tube straps are coated with a smooth copper finish. Mount to wood, metal studs or joists using nail or screw in both holes. Minimum recommended nail penetration is 3/4 inch. Refer to National or Local plumbing codes for proper hanger spacing requirements.

Sioux Chief 516 series split ring hangers shall be used where necessary to suspend or support IPS or CTS piping from threaded rod in accordance with national code requirements for light commercial applications. Hanger shall comply with MSS-SP58 Type 12 and WWH-171D Type 25. It is a robust and reliable plumbing solution, crafted from durable ductile iron with a sleek copper-plated finish. Designed to securely suspend 3/4-inch pipes, its epoxy-coated interior ensures a firm, corrosion-resistant grip, providing steadfast support in even the most demanding installations. Easy to install with its split ring design, this hanger combines functionality with a polished aesthetic, making it an essential …

3/4 inch IPS (bag of 10) Sioux Chief 502 series tube strap shall be used where necessary to fasten or secure IPS tubing and IPS piping in residential or commercial applications. Galvanized steel tube straps. Mount to wood, metal studs or joists using nail or screw in both holes. Minimum recommended nail penetration is 3/4 inch. Refer to National or Local plumbing codes for proper hanger spacing requirements.

Sioux Chief galvanized split ring hanger 3/4 pipe size recommended for the suspension of stationary non-insulated pipe lines allow for piping runs close to ceiling or walls malleable iron construction for use with 3/8 all thread rod.

1/2 inch x 6 inch (5 pack) Sioux Chief 506 series wire pipe hooks shall be used where necessary to secure CTS tubing overhead from ceiling or floor joists in residential applications. Wire pipe hooks shall be made of 10 gauge material. Wire pipe hooks shall feature 20 degree wow-bend at the prong for easier installation into the wood joist.