Ironing Boards

The temporary RV power outlet is factory-assembled and factory-tested. It comes to the construction job site ready to use with no need to assemble individual parts, saving installation time. The single, heavy-gauge NEMA 3R rainproof enclosure protects against weather, vandalism and nuisance tripping. It is lockable and is engineered for maximum protection of receptacles, cords, plugs, breakers. The unit complies with NEC and OSHA requirements.

The Generac pre-wired switch is designed to operate with 18-24kw air cooled generators. This transfer switch has an integrated load center for picking up the emergency circuits. It is especially useful where the main is large and only a portion of the building load will be served by the generator. It is available with a built in 10 or 16 circuit load center to supply only those circuits that are essential during an emergency. All standard and load center transfer switches are cETLus listed and suitable for in optional standby system.

The Square D by Schneider Electric ground bar kit is an important accessory in your home or business electrical load center. The aluminum 12 terminal ground bar kit is used in Square D load centers, CSED devices and NQOD and NF panel boards.

Homeline 50-Amp Spa Panel;Outdoor 3R Steel Enclosure Includes HOM24L50R 50A Main Lug Load Center 2 Space Circuit, 4 Single Poles One HOM250GFICP 2 Pole 50 Amp Ground Fault Circuit Interrupter

Whitmor's T-Leg Ironing Board with Cover & Pad folds quickly and easily to a compact position. The ironing board features a sturdy metal top and frame, and plastic floor caps insure a stable ironing surface. The board includes a 100% cotton cover and foam pad. It's also height adjustable from 27.5 to 35.5 inches, and is equipped with a leg-locking mechanism to keep the ironing board firmly closed when not in use.

The Square D by Schneider Electric Ground Kit, Voltage 240/600VAC, 100/200A Amps AC, For Use With General Duty/Heavy Duty/Double Throw Safety Switches

Specially designed for easy installation, Eaton's BR load centers house the branch circuit breakers and the wiring required to distribute power to individual circuits. The panels serve as the main breaker for service entrances. The main breaker protects the main entire panel and can be used as a service disconnect. The branch breakers protect the wires leading to individual electrical loads such as fixtures and outlets. The BR816B200RF is a 200 amp outdoor main breaker with 8 spaces and 16 circuits.

The GE Power Mark Gold 200 Amp space, circuit Main Breaker Meter Socket Outdoor Load Center installs easily and delivers dependable performance. This load center is ideal for overhead or underground applications and provides reliable rust resistance. Featuring compatibility with GFCI, AFCI and 1/2 in. THQP circuit breakers, this unit possess versatility for your electrical metering needs.

Eaton/Cutler Hammer 1-phase 8-pole 3-wire meter load center is designed to provide overhead/underground services and features BR type BWH2200 breaker which has a interrupt rating of 10000 amp. Rainproof load center accommodates a wire of size 6 AWG-250 kcmil. Load center is ideal for residential applications. It has voltage rating of 120/240 VAC, current rating of 200 amp and interrupt current rating of 10 kilo-amp. The 4-space Meter-Breaker has four jaws and provides surface mounting. It features feed-through lugs. All-in-one load center is UL listed and EUSERC approved.

The Square D by Schneider Electric Ground Bar Kit is an important accessory in your home or business electrical load center. The aluminum 15 Terminal Ground Bar Kit is used in Square D load centers, CSED devices and NQOD and NF panel boards. The kit has 15 terminals, each accepting (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire or (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire.

The Square D by Schneider Electric Homeline Value Pack 200 Amp 40-Space 80-Circuit Indoor Convertible Main Breaker Load Center for Plug-on Neutral breakers includes a cover and a selection of breakers. It is UL listed for residential and commercial power distribution. This load center is built with a plated, aluminum bus bar that is tested and is compatible with Square D Homeline circuit breakers. Square D Homeline load centers are designed for the value-minded contractors, remodelers, builders and homeowners. Homeline breaker boxes are engineered for fast installation and wire savings.

Quick, easy and clean describe the new Cutler-Hammer plug-on neutral design attributes offered by Eaton. Time saving features offer a quick installation equating to less time on the job. Designed to maximize installation efficiency and to provide additional convenience allowing for an easy installation. New features that help ensure an aesthetically clean and professional installation.

It is a 200 amp main breaker installed load center combination cover for flush or surface mount. It has 30 space circuit-40 single poles indoor. Use 2 (GBK14P) ground bars if required .

This 200 amp 2 Space 2 Circuit Meter Socket and Main Breaker Load Center is designed for excellent corrosion resistance, featuring a hot-dip galvanized carbon steel finished with a powder coating of polyester paint. The meter socket is designed with a ring style cover. This load center is both ANSI certified UL listed.

Siemens low voltage meter load center combination. factory installed main breaker 24 (1 inch) spaces interior allowing max 42 circuits. 4-jaw meter/1-phase system rated 200A. These new meter load-center combination devices represent an innovative and versatile addition to Siemens portfolio of high quality, EUSERC and CA title 24 compliant, residential solar solutions.

Siemens low voltage meter load center combination. factory installed main breaker 24 (1 inch) spaces interior allowing max 42 circuits. 4-jaw meter/1-phase system rated 200A. These new meter load-center combination devices represent an innovative and versatile addition to Siemens portfolio of high quality, Title 24 compliant, residential solar solutions.

The Square D by Schneider Electric Ground Bar Kit is an important accessory in your home or business electrical load center. The aluminum 23 terminal ground bar kit is used in Square D load centers, CSED devices and NQOD and NF panel boards. The kit has 23 terminals, each accepting (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire or (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire.

Specially designed for easy installation, Eaton's BR load centers house the branch circuit breakers and the wiring required to distribute power to individual circuits. This panel is a main lug panel which is used as sub-panel to add circuits to an existing main breaker panel. Sub panels are often used in a garage, home addition, barn or storage shed and/or workshop. The branch breakers protect the wires leading to individual electrical loads such as fixtures and outlets. The BR2024L125 is a 125 amp main lug with 20 spaces and 24 circuits.

Eaton's residential meter breakers are service entrance equipment systems that consist of a single meter socket and load center or a meter socket and main breaker combined in one enclosure. This design provides the contractor with labor and material savings. The meter breakers are constructed to meet the latest NEC wire bending space requirements. The MBE2040B200BTS is a 200 amp, 20 space, 40 circuit outdoor panel.

The Eaton 200 Amps 120/240 V 20-Space 40-Circuit Combination Mount Main Breaker Load Center provides reliable power distribution for residential electrical systems with a compact, high-capacity design.

Specially designed for easy installation, Eaton's

The Square D by Schneider Electric Ground Bar Kit is an important accessory in your home or business electrical load center. This 9 Terminal Ground Bar Kit is used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire.

The Square D by Schneider Electric ground bar kit is an important accessory in your home or business electrical load center. The aluminum 18 terminal ground bar kit is used in square D load centers, CSED devices and NQOD and NF panel boards.

Specially designed for easy installation, Eaton's BR load centers house the branch circuit breakers and the wiring required to distribute power to individual circuits. This panel is a main lug panel which is used as sub-panel to add circuits to an existing main breaker panel. Sub panels are often used in a garage, home addition, barn or storage shed and/or workshop. The branch breakers protect the wires leading to individual electrical loads such as fixtures and outlets. The BR816L125RP is a 125 amp main lug with 8 spaces and 16 circuits.