Other Hawke

Hawke Sport Optics 1/10 MRAD Interchangeable Turrets 1/10 MRAD click value 30 clicks = 3 MRAD per full revolution; 13MRAD total travel Finger-adjustable, exposed turrets Easy tool-free swap via patented turret collar system Anodized aluminum body For use with the Hawke Sidewinder ED

Hawke Match Mount 1" Rings, Weaver, Medium, Black Medium profile, 2-piece 1" rings Fit Weaver rails Double hex screws secure the scope Integrated crossbar for added security Internal cushion tape prevents scratches High-grade anodized aluminum construction Height: 1.7" Weight: 2.9 oz

Hawke Sport Optics Bubble Level, Fits 9-11mm Dovetails Bubble level Fits 9mm to 11mm dovetails Helps you level your gun & scope for maximum accuracy

Bubble level Fits Weaver/Picatinny rails Helps you level your gun & scope for maximum accuracy • If your gun isn't as accurate as you think it should be, attach this bubble level and watch where the bubble sits when you're ready to shoot. If it's not plumb center, that might be the cause of your problems.

Hawke 1-Pc Mount, 1" Rings, 9-11mm Rail, Medium, Matte Black 1-piece mount 1" rings / 25.4mm Medium height - 1.7" / 43mm Reversible dove tail clamp that fits 9-11mm and 3/8 inch Internal cushion tape prevents marks and scope damage High grade anodized aluminum with rounded edges Fitted with recoil stop pin 4.9 oz. 3.9" length Matte black
High powered air rifles can deliver punishing recoil which could possible shake a riflescope out of zero. Hawke scope mounts are designed to withstand that powerful recoil.

Hawke Match Mount 1" Rings, Weaver, Low, Black 1" rings Low profile Fits Weaver/Picatinny rail 4 screws per screw cap, 1 screw per base Constructed of high grade aluminum Weaver version features crossbar for additional security
Special cushion tape inside the rings keeps your scope tight without excessive clamp pressure!

Hawke 1" Tactical Rings, 9-11mm, Extra-High 1 inch scope rings 2 piece set Extra-High profile for larger objective scopes Ring height: 36mm (1.4 inches) Fits 9-11mm Dovetail rail Internal Cushion

Hawke 1" Tactical Rings, 9-11mm, High 30mm scope rings 2 piece set High profile for larger objective scopes Overall ring height: 48mm (1.9") Center ring height: 30mm (1.2 inches) Weight: 4.4 ounces Fits 9-11mm Dovetail rail (reversible to fit 3/8") Attaches to rail via Double T15 Torx screws Internal Cushion

Hawke 1" Tactical Rings, 9-11mm, Medium 1 inch scope rings 2 piece set Medium height Overall ring height: 1.7" Center ring height: 1" Weight: 4.2 ounces Fits 9-11mm Dovetail rail Torx T15 Internal Cushion

Hawke 1" Tactical Rings, Weaver, High 1 inch scope rings 2 piece set High profile for larger objective scopes Center ring height: 30mm (1.2 inches) Overall ring height: 50mm (2 inches) Weight: 5 ounces Internal Cushion Triple Torx (T15) 1/2" hex nut Internal Cushion

Hawke 2pc 30mm 9-11mm High 1" Extension High profile to accommodate larger-objective scopes Double hex screws to hold scope in place Fitted with recoil stop pin Internal cushion tape prevents marking and damage High-grade aluminum anodized in matte black 2-piece configuration, one ring has1" extension Ring size (diameter): 30mm Rail: 9-11mm Double hex screw fixings for rail and top cap Height: 50mm (1.9") Weight: 113g (4 oz.) Rounded edges to prevent scope damage

Hawke 2pc 30mm High Scope Rings, Elevation Adjustable, 9-11mm Dovetail 9-11mm dovetail mounts 30mm scope rings High-grade matte black anodized aluminum Adjustable for elevation to +/- 30 MOA Retractable recoil stop pin Internal cushion tape Reversible dovetail clamp fits 3/8" and 9-11mm Height: 2.1" Weight: 4oz

Hawke 2-piece 1" Offset High Rings, 1" Dovetail 1-inch extension configuration High rings to accommodate larger objective scopes Double hex screws to hold your scope firmly in place 9-11mm models are fitted with a recoil stop pin Reversible dove tail clamp that fits 9-11mm and 3/8 inch Internal cushion tape prevents marking and damage High-grade aluminum anodized in matte black

Hawke 30mm Tactical Match Rings, 9-11mm, Extra-High 30mm scope rings 2 piece set Extra-High profile for larger objective scopes Ring height: 38mm (1.5 inches) Fits 9-11mm Dovetail rail Internal Cushion

Hawke 30mm Tactical Match Rings, 9-11mm, High 30mm scope rings 2 piece set High profile for larger objective scopes Overall ring height: 52mm (2") Center ring height: 32mm (1.3 inches) Weight: 4.6 ounces Fits 9-11mm Dovetail rail (reversible to fit 3/8") Attaches to rail via Double T15 Torx screws Internal Cushion

Hawke 30mm Tactical Match Rings, 9-11mm, Medium 30mm scope rings 2 piece set Medium height Fits 9-11mm Dovetail rail Internal Cushion Center ring height: 26mm (1 inch) Overall ring height: 46mm (1.8 inches) Weight: 4.3 ounces Triple Torx (T15) Attaches to rail via Double Torx (T15)

Hawke 30mm Tactical Match Rings, Weaver, Extra-High 30mm scope rings 2 piece set Extra-High profile for larger objective scopes Center ring height: 38mm (1.5 inches) Overall ring height: 61mm (2.4 inches) Weight: 5.8 ounces Internal Cushion Triple Torx (T15) 1/2" hex nut

Hawke 30mm Tactical Match Rings, Weaver, High 30mm scope rings 2 piece set High profile for larger objective scopes Center ring height: 32mm (1.3 inches) Overall ring height: 55mm (2.2 inches) Weight: 5.4 ounces Internal Cushion Triple Torx (T15) 1/2" hex nut

Hawke Match Mount 1" 2-Piece 1" rings 2 piece High profile Fits 9 to 11mm dovetails 4 double hex screws hold scope firmly in place Retractable recoil scope stop pin Reversible dovetail clamp fits 9-11mm and 3/8 inch Internal cushion tape prevents marking and damage High-grade aluminum 3.6 oz.

1 rings Low profile Fits 3/8 to 11mm dovetails 4 hex screws/ring cap secure your scope Retractable scope stop pin High-grade aluminum Rings lined with textured, cushioned tape to securely hold scope Includes 2 hex wrenches

Hawke Match 1" Rings, Medium, 9 to 11mm, 2 pc. 1" rings Medium profile Fits 9 to 11mm dovetails 4 double hex screws hold scope firmly in place Retractable recoil scope stop pin Reversible dovetail clamp fits 9-11mm and 3/8 inch Internal cushion tape prevents marking and damage High-grade aluminum

Hawke Match Mount 1-pc 1" mount High profile, 1-piece scope mount 1" rings Fits 9-11mm dovetail Recoil stop pin Double hex screws secure the scope Reversible dovetail clamp fits 9-11mm and 3/8 inch Internal cushion tape prevents scratches High-grade anodized aluminum construction Ideal for guns that need additional scope elevation Height: 2" Weight: 5.9 oz

Hawke 30mm Two Piece 2" Offset Rings Features High profile Fits 3/8" to 11mm dovetails 4 hex screws/ring cap secure your scope Retractable scope stop pin High-grade aluminum Rings lined with textured, cushioned tape to securely hold scope Includes 2 hex wrenches