USA
Catalog   /   Office & Stationery   /   Printing & Polygraphy   /   Other printing

Other printing Monoprice

 prices on 6 models  
Monoprice
clear
Show
The Stage Right™ powerCON® Cable is the ideal power cable for powering many professional audio devices. The Neutrik® powerCON (NAC3FCA) connector is a 3-conductor, locking power connector, which provides a safer power connection than the IEC 60320 C13/C14 connectors commonly found on consumer audio components, computers, power adapters, and other devices. The twist connector mates the ground contact before connecting the neutral and line contacts, ensuring an electrically safe connection. It carries an IP65 ingress protection rating, which means that it is completely dust-tight. It can also withstand at least 3 minutes of a 1/4" direct water jet at a pressure of 4.3 psi (30 kPa),…
from $24.99 up to $36.76 
Compare prices and buy Monoprice Stage Right by 16 AWG NEMA 5-15P to powerCON Connector
$25.00
$37.00
Compare prices2
This convenient shelf features brackets that mount to the VESA mounting holes found on the back of your TV; and the beautiful smoked glass shelf can be configured to sit either above or below your screen to hold cable boxes, Blu-Ray players, game consoles, speakers, etc.
The bracket will fit almost any TV having a maximum VESA size of 400x300. If your TV is connected to a wall mount, the shelf brackets will fit between the wall mount and the TV, allowing an easy way to hold your AV device, without cabinet furniture or wall-mounted shelving. The shelf also has a tilt feature that allows the shelf to sit level, even if the TV screen is mounted at a downward angle.
The shelf and bracket feature …
from $37.77 up to $39.99 
Compare prices and buy Monoprice TV Mounted Glass Shelf, Allows Above or Below TV Mount
$38.00
$40.00
Compare prices2
Get outstanding 3D printing results when you use 1.75mm PLA Plus+ 3D Printer Filament from Monoprice™! PLA Plus+ is a good choice for a printing material if you are looking for high accuracy and high resolution. It does not require a heated base and has a very low shrinkage rate (0.3%). PLA Plus+ is stronger than ordinary PLA, possessing the same strength as normal ABS material. This 1.0kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.03mm. It has a nominal processing temperature range of 205 ~ 225°C (401 ~ 437°F). Thickness and roundness factors are laser measured at the …
$12.99
Monoprice.com
Delivery: in USA
Report
Buy!
Monoprice.com
Get outstanding 3D printing results when you use 1.75mm ABS 3D Printer Filament from Monoprice™! ABS is one of the most commonly used filament types in 3D printing. It has a high tensile strength and good overall toughness. It has a low density and is softer than PLA, which means lower weight and lower cost when printing large models. Hardness is such that no white dot appears when bending. This 1kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.05mm. It has a nominal processing temperature of 230°C (446°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. …
$12.99
Monoprice.com
Delivery: in USA
Report
Buy!
Monoprice.com
Get outstanding 3D printing results when you use 1.75mm PLA 3D Printer Filament from Monoprice™! PLA is a good choice for a printing material if you are looking for high accuracy and high resolution. It extrudes at lower temperatures, does not require a heated base, and has a very low shrinkage rate (0.3%). PLA is harder than ABS, but is therefore also a bit more brittle. This 1 kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.03mm. It has a nominal processing temperature of 210° C (410°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. The negatives of …
$12.99
Monoprice.com
Delivery: in USA
Report
Buy!
Monoprice.com
Get outstanding 3D printing results when you use 3.0mm PLA 3D Printer Filament from Monoprice™! PLA is a good choice for a printing material if you are looking for high accuracy and high resolution. It extrudes at lower temperatures, does not require a heated base, and has a very low shrinkage rate (0.3%). PLA is harder than ABS, but is therefore also a bit more brittle. This 1 kg spool features a thickness of 3.0mm ±0.10mm, with a roundness variation of only 0.03mm. It has a nominal processing temperature of 185° C (365°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy …
$12.99
Monoprice.com
Delivery: in USA
Report
Buy!
Monoprice.com
Filters
Price
fromup to
Brands
Clear parameters
Catalog other printing 2024 - new products, best sales, buy other printing.