Car Subwoofers

Designed to fit into spaces with little space With a 4' mounting depth these shallow subwoofers still get down and produce a lot of bass with any stereo system Upgraded rubber surround for improved durability when playing those deep bass tones Slim in size with big bass and perfect for small trunks and under pickup truck seats and are priced at an affordable price Progressive poly cotton spider for controlled motion resulting in lower distortion

Single 12' tuned ported enclosure 1 SRX1240 12' Subwoofer installed SRX250.1 Amplifier Included Remote Level Control Included Peak Power (w): 500

6.5 Inch Compact Subwoofer 1 or 2 Ohm FLEX Selectable Impedance 700 Watts RMS, 1400 Watts Peak Handling DVVC Direct Vent Voice Coil Cooling Mounting Depth: 5 Inch

Selectable Impedance Design: 2 Ohm or 4 Ohm Reinforced Double Stitched Rubber Surround Polypropylene Dust Cap 2' 4-Layer Aluminum Multi-Coil Voice Coil DVVC Dual Layer Vented Voice Coil

SE1040 10' Subwoofer: RMS/PEAK: 200w/400w SE2000.1DF Amplifier: Max Power: 2000w x 1ch Custom Street Edge embroidered enclosure Ported for Maximum performance and output DVVC Direct Vent Voice Coil Cooling Polypropylene SE branded cone

Selectable Impedance Design: 2 Ohm or 4 Ohm Reinforced Double Stitched Rubber Surround Polypropylene Dust Cap 1.5' 4-Layer Aluminum Multi-Coil Voice Coil DVVC Dual Layer Vented Voice Coil

1 Ohm or 2 Ohm selectable impedance RMS/Peak: 1500/3000 Watts 3.5' aluminum triple voice coil Double stitched rubber surround Light weight ultra rigid glass fiber dustcap

Selectable Impedance Design: 2 Ohm or 4 Ohm Reinforced Double Stitched Rubber Surround Polypropylene Dust Cap 2' 4-Layer Aluminum Multi-Coil Voice Coil DVVC Dual Layer Vented Voice Coil

15' subwoofer with dual 2-ohm voice coils Rigid paper cone with double-stitched foam surround Power handling: 750 watts RMS (1500 watts peak) Can be wired for 1-ohm or 4-ohm impedance Vented die-cast aluminum basket

Side port enclosure design Magnet Size oz: 320 Engineered to exact TS parameters 7.5' shorting ring for reduced distortion Cut Out Diameter in: W: 30.11', H: 16.14', D(Bottom): 17.91' D(Top): 14.17'

Designed to fit in places that have a tight squeeze Even with 4' mounting depth these subwoofers can still bring you an excessive amount of bass Butyl rubber surround, injection molded polypropylene cone and 2' aluminum voice coil design Progressive poly cotton spider for controlled motion resulting in lower distortion At an affordable price, you're still getting the quality build and impressive bass

RMS/Peak: 1500/3000 Watts Sensitivity: 83 d B Magnet Size: 250oz Mounting depth: 8.58' Cut Out Diameter: 10.78'

Lightweight but rigid cone design for improved efficiency Progressive poly cotton spider, it allows for controlled motion, resulting in lower distortion butyl rubber surround gives the subwoofer improved durability and making it able to handle more flex and last longer 250 Watts RMS / 500 Watts Max Power Optimized for both sealed and vented enclosures

RMS Power (w) 300 Peak Power (w) 600 Mounting Depth (in) 5.54 Selectable impedance design 2 or 4 DVVC Direct Voice Coil Cooling technology

750W RMS/ 1500W Max Mounting Depth - 7.48in 1 Ohm or 2 Ohm selectable impedance Folded Surround for increased excursion without sacrificing effective surface area 2.5' aluminum triple voice coil

12' subwoofer with dual 2-ohm voice coils Rigid paper cone with double-stitched foam surround Vented die-cast aluminum basket Can be wired for 1-ohm or 4-ohm impedance Power handling: 750 watts RMS (1500 watts peak)

10' subwoofer with dual 4-ohm voice coils Rigid paper cone with double-stitched foam surround Power handling: 750 watts RMS (1500 watts peak) Can be wired for 2-ohm or 8-ohm impedance Designed for high SPL performance

10' Subwoofer Built-In Amplifier Carpeted Embroidered Enclosure Bass Level Control Included High and Low-Level Inputs

750W RMS/ 1500W Max Mounting Depth - 6.87in 1 Ohm or 2 Ohm selectable impedance Folded Surround for increased excursion without sacrificing effective surface area 2.5' aluminum triple voice coil

Features: All-Weather Construction for use in almost any environment Integrated Bluetooth Receiver Auxiliary Input for Connecting Devices Via 3.5mm Auxiliary Output for Connecting An External Amplifier or Additional Soundbar Mounting Clamps Fit 1.75' and 2' Bars Long Bolts for Golf Cart 'Tube' mounting Power, Ground, and Accessory Wire Included for easy installation. MAX Power Rating 800W MAX RMS Power (4O) 200 W Types Full Range, Class D Power Supply Full PWM Power Supply (Threshold) 10.0DVC -

Size: 8' Watts RMS: 400 Voice Coil: 2' Dual 4 Ohm SPL: 88 d B @2.83V/1m Dimensions: 18' x 12' x 10

Rockford Fosgate M2-200X2 200W 2-Channel Amplifier

Rockford Fosgate M1D2-10B 10'' Color Optix marine subwoofer, black.