Camera Bags Porta Brace

Porta-Brace's WPC-2ORB Wheeled Production Case is designed for transporting a wide variety of heavy loads for studio, audio, video and film equipment. They are for handling gear on location as well as transporting to and from the job site. Their construction consists of a strong, ridged interior frame covered with 1,000 denier Cordura® nylon fabric, with padded protection all around. The WPC-20R's wheels have long axles which provide good tracking. A well-shaped Vermont hard maple handle is mounted on strong steel telescoping beams that retract into the case for snag-proof shipping. A divider kit is provided which allows you to customize an infinite number of storage compartment configurations.…

The Porta Brace WPC-1ORB is a wheeled production case that is designed for for transporting all kinds of heavy loads for studio, audio, video and film equipment. The entire case line has been redesigned to provide more space with lighter weight frames.Constructed of a strong, rigid interior frame covered with padding and 1,000 denier Cordura® nylon fabric.The off-road wheels have ball-bearings and sturdy steel axels for long-lasting smooth rolling over almost any surface. The WPC-1ORB also has a retractable handle.All models come with padded, customizable divider-kits and LI-GLW Interior Illumination Pouches.Porta Brace WPC-1ORB Features:Durable, rigid framesCustomizable interior setupsDurable …

The Porta Brace TLQ-35 Quick Tripod/Light Case has a padded interior, interior reinforcing bars, and is made of 1000 denier Cordura nylon. It can carry 2 or 3 assembled light stands or a tripod with head that are/is 34.5" long or shorter. Also features suede leather-covered handles, a suede leather shoulder strap, exterior and interior pockets, a red tie-down strap, and a rigid foam padded case bottom.Porta Brace TLQ-35 Features:Full-width zippered front pocket with ID windowFull-width rear mesh pocketFull-width zippered interior pocketTwo interior slip pocketsCompatible with Vinten Vision 20 and Vision 250 Series tripods. Porta-Brace TLQB35 Case,Light/Quick,Tripod,35BLK.

Porta-Brace's SS-2 Side Sling Pack is designed for carrying all kinds of personal accessories. Used by videographers, audiographers, and film makers, the SS-2 is an over-the-shoulder, bandolier-style sling kit. It is form-fitting, comfortable to wear and easy to grab and throw over your shoulder for a last-minute shoot. A waist cinch strap is provided for extra stability, or can be stored in a pocket. It has a padded, non-skid shoulder camera support pad. A large selection of pockets will carry such accessories and gear as cell phones, two-way radios, beepers, tools, batteries, tapes, cables, note pads, maglites, keys, wallet, watch, rain gear, gloves, hand held mics, etc., etc. Also features …

Porta-Brace's SP-1B Sack Pack production case is a basic carry case for paraphernalia of all kinds. The Sack Pack is as handy and simple to use as a shopping bag but with all the extra advantages of a well constructed Porta-Brace® case. The case has two slip pockets, one on the front and one on the back. Constructed of a double layer of 1000 denier Cordura® and foam padded bottoms. A cinching cord around the top edge provides tight, secure handling.Weight: 3 lbs (1.36 kg)Interior Dimensions: 14" L x 6" W x 14" H (35.56 x 15.24 x 35.56 cm) Porta-Brace SP-1B Small Sack Pack (Black).

Leverage the Custom Rain Cover by Porta Brace to safeguard your Canon XF705 camera against adverse weather conditions. Constructed with a durable three-ply nylon Taslan exterior, this cover ensures resilience and robust protection. Its interior, featuring a soft tricot lining, serves as a preventive layer, mitigating the risk of undesired scratches and smudges on the camera surface.Porta-Brace RS-XF705 Features:Three-Ply Nylon Taslan Exterior: Provides robust protection against inclement weather conditions.Soft Tricot Interior: Lined interior prevents scratches and smudges on the camera surface.Custom Fit: Tailored specifically for the Canon XF705 camera for a precise and snug fit.Weather Resilience: …

Now you can protect your DSLR camera from rain, dust and sea spray. Porta-Brace's RS-DSLR2 rain slicker uses the same triple-layer nylon material with waterproof coating that their compact HD Rains Slickers do. Designed specifically for DSLR cameras, the RS-DSLR2 has 2 different detachable lens protection covers: one for matte-boxes and a second for traditional or zoom lenses. Sleeves with elastic openings on either side of the case provide full access to camera controls while keeping your camera and hands dry. There's a double-layer Velcro-sealed access panel along the top of the case for attaching flashes and lights and clear vinyl windows provide easy viewing of display screens and lens points.…

Specifically designed for Sony's UTX-P03 plugin wireless transmitter, the Portabrace RMB-UTXP03 is made from padded Cordura fabric. This strong, durable case wraps tightly and securely around the transmitter to protect it from dents and dings. The transmitter can be attached to a belt or strap using the included belt clip or built-in D-ring.Portabrace RMB-UTXP03 Features:Protective padded CorduraTight secure fitConvenient belt clipPortabrace RMB-UTXP03 Specifications:Dimensions (WxHxD): 1-3/4" x 3-1/8" x 3/4" (4.4 x 7.8 x 1.9 cm)Weight: 2.4 oz (68 g) Porta-Brace RMB-UTXP03 Padded Case for Sony UTX-P03.

The Portabrace RIG-FS7ENG is a rigid-frame ENG-style Shoot Ready camera case with padded viewfinder protection, specifically designed for the Sony PXW-FS7 XDCAM camcorder.The case has a lightweight, hollow-core rigid frame surrounded by a layer of padding and abrasion-resistant 1000-denier Cordura material. There are two large exterior pockets ideal for carrying tablet computers, microphones, cables, spare batteries and other accessories.The interior is lined with soft copper-colored Veltex that both protects your PXW-FS7 and allows you to reposition the interior divider panels anywhere along the inside of the case. A camera tie-down strap is also included to further secure the camera during …

Porta-Brace's RB-4 Extra-Large Run Bag has a newly revised zipper facing that keeps even more water out of the case's interior. The main compartment is foam-padded with a padded rigid bottom. Two dividers span the 7" width with a 12" divider in between (with a zippered slip pocket), providing a useful array of subdivisions. The dividers can also be folded out of the way to make one large compartment. Shoulder strap and removable tool pouch are included. A new bottom layer of Slip-Not water barrier fabric with an easy wipe clean surface has been added, as well.SpecificationsInterior Dimensions: 30" L x 8" W x 11" H (76.2 x 20.32 x 27.94 cm)Weight: 6.1 lbs. (2.77 kg) Porta-Brace RB-4 Extra-Large …

NOTE:Shown above in blue, but comes in black.Porta-Brace's RB-3 Large Run Bag has a newly revised zipper facing that keeps even more water out of the case's interior. The main compartment is foam-padded with a padded rigid bottom. Two dividers span the 7" width with a 12" divider in between (with a zippered slip pocket), providing a useful array of subdivisions. The dividers can also be folded out of the way to make one large compartment. Shoulder strap and removable tool pouch are included. A new bottom layer of Slip-Not water barrier fabric with an easy wipe clean surface has been added, as well.SpecificationsInterior Dimensions: 25" L x 7" W x 9.5" H (63.5 x 17.78 x 24.13 cm)Weight: 4.6 lbs.…

Porta-Brace's RB-2 Medium Run Bag has a newly revised zipper facing that keeps even more water out of the case's interior. The main compartment is foam-padded with a padded rigid bottom. Two dividers span the 7" width with a 12" divider in between (with a zippered slip pocket), providing a useful array of subdivisions. The dividers can also be folded out of the way to make one large compartment. Shoulder strap is included. A new bottom layer of Slip-Not water barrier fabric with an easy wipe clean surface has been added, as well.SpecificationsInterior Dimensions: 21" L x 7" W x 9.5" H (53.34 x 17.78 x 24.13 cm)Weight: 3.9 lbs. (1.77 kg) Porta-Brace RB-2-PORTABRACE Medium Run Bag.

Portabrace's PC-111 Medium Production Case is crush-proof and is shaped by a full-width rigid panel between layers of Cordura Nylon. The PC-111 has a bonded foam and plastic, lightweight rigid lid. Interior partitions can be positioned to accommodate numerous combinations of cassettes, batteries, mics, cables, filters, wireless mics and other audio equipment. Included in the case is a small clip-on pouch with a window for keeping track of small items such as adapters and attenuators. See-through mesh pockets in the top flap provide convenient access to things often used. Two sewn-on end pockets and a large mesh slip pocket provide room for extras. A well-positioned mic holster also adds to the …

SpecificationsInterior Dimensions: 12" x 9.06" x 5.39" (30.48 x 23.01 x 13.69 cm)Exterior Dimensions: 13.19" x 11.42" x 6.1" (33.50 x 29.01 x 15.49 cm)Compatible with:Blackmagic Design: Cinema CameraJVC: GY-HMQ10USony: HXR-NX30U Porta-Brace PB-2300F Extra-Small Hard Case with Foam.

Specifications:Interior Dimensions: 12" x 9.06" x 5.39" (30.48 x 23.01 x 13.69 cm)Exterior Dimensions: 13.19" x 11.42" x 6.1" (33.50 x 29.01 x 15.49 cm)Weight: 3.68 lbs (1.67 kg)Compatible with:Blackmagic Design: Cinema CameraJVC: GY-HMQ10USony: HXR-NX30U Porta-Brace PB-2300E Extra-Small Hard Case without Foam.

The Porta-Brace LPB-LED4 carrying case is designed to carry four Lite Panel 1X1's or similar LED lights. Each case is made using 1000-deiner Cordura material that is foam-padded to protect the light panels during transport. There is a thick, foam-padded "U" shape at the base of the case for extra protection against drops.The top-loading zipper design gives you quick access to your light panel during setup. A comfortable suede leather shoulder strap is included for carrying the case over your shoulder.Porta-Brade LPB-LED4 Specifications:Fits multiple Lite Panels 1X1 (or similar) lightsRemovable interior dividerDurable, 1000-denier Cordura nylonClosed-cell foam padded interiorThick U-shaped foam …

The PortaBrace HB-A2 Audio Shoulder Strap features a Memory Foam fill that conforms to your shoulder for exceptional comfort. It includes special attachments for organizing headphones, microphones with cube transmitters, cables, and boom poles. The strap also has a zippered pocket large enough to hold an iPod, wireless transmitter, 9V and AA batteries, or a cell phone.Porta-Brace HB-A2 Features:Wider version of the H-A1 for heavier audio equipmentSuper thick paddingSuperior comfortSlip-Not surfaceCarries all sorts of audio accessoriesLarge pocket for accessoriesMemory foam contours to your shoulderSuper, non-slip gripWorks with PortaBrace Audio Organizers Porta-Brace HB-A2 Shoulder Strap.

Porta-Brace's DVO-2R DV Organizer Case provides an extra level of protection and lots of storage options and is ideal for compact field production. Comes with two CS-B9 soft padded stuff packs, custom cradle with tie-down strap (custom Porta-Brace DVO2R DVO-2R.

DV ORGANIZER Camera Cases in Midnight Black with Red Trim. The DV Organizer provides an extra level of pro options. The DV Organizer is the ideal case for compact protection and lots of storage for field production. DV Organizer Combo includes DV organizer, 2 CS-B9 soft padded stuff packs, custom cradle with tie-down strap (custom fit for your camera), suede leather shoulder strap and white balance card.Features:Customizable solutionEngineered for professionalsLightweightSame, durable 1000-denier Cordura fabricSuperior performance through simplicity of designCompatible with:Canon GL-1Canon GL-2Canon XH-A1Canon XH-G1Canon XM-1Canon XM-2Panasonic AG-DVC80Panasonic AG-DVC80HPanasonic AG-DVX100Panasonic …

Porta-Brace's CS-DV4U Mini-DV Camera Case protects and organizes the camera, spare battery, tapes, microphones and rain cover. The case is designed to allow quick access to a large number of mini-DV cameras (see list of specific model numbers & brands below). The bottom panel is reinforced with 8mm hollow-core plastic, foam layers and a layer of Slip Not fabric, which adds an extra layer of protection against water, dirt and grime in an easy wipe-off surface. 1" thick foam &1000 Denier Cordura Nylon (with a generous coating of polyurethane waterproofing) provide long-lasting protection. The cradle is adjustable, giving it a secure home and allowing any remaining space for accessories. A small …

Porta-Brace's CS-DV4R Mini-DV Camera Case protects and organizes the camera, spare battery, tapes, microphones and rain cover. The bottom panel is reinforced with 8mm hollow-core plastic, 1" thick foam layers and a new layer of Slip Not fabric, which adds an extra layer of protection in an easy wipe-off surface. The cradle inside is adjustable and stays where you put it to keep the camera from shifting. A small padded pouch, a suede shoulder strap and a white balance card are also included. One large exterior pocket holds a rain cover, cables, and a wide slip pocket for white balance card, owner’s manual, maps airline tickets, etc.Dimensions:Interior: 21.5" L x 8" W x 10" H (54.61 x 20.…

Porta-Brace's CS-DV3U Mini-DV Camera Case protects and organizes the camera, spare battery, tapes, microphones and rain cover. The bottom panel is reinforced with 8mm hollow-core plastic, foam layers and a layer of Slip Not fabric, which adds an extra layer of protection against water, dirt and grime in an easy wipe-off surface. 1" thick foam & 1000 Denier Cordura Nylon (with a generous coating of polyurethane waterproofing) provide long lasting protection. The cradle inside is adjustable and stays where you put it to keep the camera from shifting. A small padded pouch, suede shoulder strap and a white balance card are also included. One large exterior pocket holds a Rain Cover, cables, and …

The Portabrace CS-DV2R is a compact HD camera case that protects your camera as well as spare batteries, tape, microphones, and other accessories. The bottom panel is reinforced with 8mm hollow-core plastic and a layer of non-skid material, which adds an extra layer of protection against water, dirt and grime with an easy wipe-off surface.The body of the case is constructed of 1" thick foam and 1000-denier Cordura® Nylon with a polyurethane water-resistant coating. There is a camera cradle inside to secure the camera during transport. A comfortable shoulder strap is included.Portabrace CS-DV2R Includes:(1) CARA-BRNZ Carabiner & Flashlight(1) CLS CLS Strap(1) CS-B9 Cam-Corder Stuff Sack(1) …

Portabrace's CS-DC3R Digital Camera Carrying Case protects and organizes the camera and the essential accessories. The bottom panel is reinforced with 8mm hollow core plastic, foam, and a layer of anti-skid material, which adds provides extra protection against water, dirt and grime with an easy wipe-off surface.1" thick foam, 1000 denier Cordura Nylon with a generous coating of polyurethane waterproofing provides long lasting protection. The cradle inside is adjustable and stays where you put it to keep the camera from shifting.This case has one large front zipper pocket with six slip pockets inside, and on the outside of the large zipper pocket is one mesh zipper pocket, on the opposite side …