Other Components Monoprice

This Blackbird™ 4K Pro HDMI® 2.0 Repeater amplifies and equalizes an HDMI signal, allowing it to be extended further than otherwise possible. It can extend 4K@60Hz 4:4:4 signals up to 26 feet (8 meters), 4K@60Hz 4:2:0 up to 49 feet (15 meters), or 1080p@60Hz up to 65 feet (20 meters). It provides up to 18Gbps bandwidth and supports Clock Data Recovery (CDR) to ensure no signal loss.
Features:
- Complies with the HDMI® 2.0, HDCP™ 2.2, and DVI™ 1.0 standards
- Provides 18Gbps video bandwidth
- Supports resolutions up to 4K@60Hz 4:4:4
- Supports HLG, HDR 10, HDR 10+, and Dolby Vision™
- Can extend 4K@60Hz 4:4:4 signals up to 26 feet (8 meters), 4K@60Hz 4:2:0 …

*** !!! WARNING !!! ***
Note that this cable is NOT an ordinary HDMI® cable. This is specifically for connecting a device with an HDMI connector to another device equipped with a Single Link DVIâ„¢-D connector, typically found on PCs, projectors, and older video equipment before the HDMI standard became widespread. These cables can NOT carry audio. They carry video signals only!
If you are looking for a High Speed HDMI Cable or a Standard HDMI Cable to connect equipment with HDMI connectors, please look at one of the following categories instead:
HDMI Cables
HDMI Cables With Ethernet
*** !!! WARNING !!! ***

This HDMI to DVI Adapter Cable is capable of video performance …

The Monoprice Power Cord with NEMA 5-15P to IEC 60320 C13 connectors is a versatile solution for connecting various electronic devices in North America. Designed to work seamlessly with PCs, monitors, scanners, and printers, this power cord ensures a reliable power supply for your equipment. The cord enables you to effortlessly connect devices equipped with a male IEC 60320 C14 panel connector to a standard US AC wall outlet. With a standard, grounded NEMA 5-15P plug on one end and an IEC 60320 C13 female connector on the other, setup becomes hassle-free. Simply link the female C13 connector to your device or power adapter's male C14 connector, and then insert the NEMA plug into an accessible …

Connect your mini DisplayPort® equipped MacBook®, laptop, or PC to a DVI™ display using this Mini DisplayPort to DVI Adapter from Monoprice™.
This is a passive adapter, which requires no additional power. It converts the mini DisplayPort video signal to a DVI video signal. Note that this is not bidirectional and therefore will NOT convert DVI video to mini DisplayPort. Also note that this does not support audio.
Note: This is a passive adapter and is therefore NOT suitable for AMD® Eyefinity installations. An active adapter, such as PID 5135, is required for Eyefinity setups.







Monoprice™ and all Monoprice logos are trademarks of Monoprice Inc. …

Connect your mini DisplayPort® equipped MacBook®, laptop, or PC to an HDMI® display using this Mini DisplayPort to HDMI Adapter from Monoprice™.
This is a passive adapter, which requires no additional power. It converts the mini DisplayPort signal to an HDMI audio/video signal. The adapter supports resolutions up to 1920x1080p and up to 36‑bit Deep Color (12‑bits per channel). Note that this is not bidirectional and therefore will NOT convert HDMI video to mini DisplayPort.
Note: This is a passive adapter and is therefore NOT suitable for AMD® Eyefinity installations. An active adapter, such as PID 5135, is required for Eyefinity setups.







Monoprice™ …

When your MacBook® needs to connect to a variety of different display types, you need this multifunction adapter from Monoprice™!
This adapter has a mini DisplayPort® (mDP) connector on one end for connecting to the output of your MacBook, MacBook Pro®, MacBook Air®, or any other device with an mDP output. The other end has DisplayPort (DP), HDMI®, and DVI™ output ports, allowing you to connect to a single display using either of these standards. This adapter saves you the hassle and expense of purchasing and transporting different adapters with your MacBook because this one adapter fits all the primary standards you are likely to encounter in your travels.
Note …

Connect your mini DisplayPort® equipped MacBook®, laptop, or PC to a VGA display using this Mini DisplayPort to VGA Adapter from Monoprice™.
This is a passive adapter, which requires no additional power. It converts the mini DisplayPort video signal to a VGA video signal. Note that this is not bidirectional and therefore will NOT convert VGA video to mini DisplayPort. Also note that this does not support audio. The adapter is 6" long.
Note: This is a passive adapter and is therefore NOT suitable for AMD® Eyefinity installations. An active adapter, such as PID 5135, is required for Eyefinity setups.

…

Connect your Mini DisplayPort® or Thunderbolt™ equipped PC or Mac® to a 4K HDMI®, Single Link DVI™, or VGA video display using this Mini DisplayPort 1.2a / Thunderbolt to 4K HDMI, DVI, and VGA Passive Adapter from Monoprice™!
This adapter is designed to allow you to connect an HDMI, DVI, or VGA display to a Mini DisplayPort or Thunderbolt video output. It conforms to the DisplayPort 1.2a standard and supports HDMI resolutions up to 4K (3840x2160p) @30Hz, Single Link DVI resolutions up to 1920x1080p @60Hz, and VGA resolutions up to 1920x1080p @60Hz. Being a passive adapter, it is NOT compatible with the AMD® Eyefinity or nVidia® Surround™ …

Monoprice offers precision crafted, premium quality, gold plated coaxial connector adapters for every situation. All of our adapters feature high grade materials and quality connectors that provide secure connections. Each of these are rated to smoothly transfer 75ohm signals.This connector has a female BNC connector and a male RCA jack.

Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov

Monoprice Affinity™ Series Banana plugs make speaker installations easy. They are designed for use with amplifiers or speakers that use binding posts.
These high quality plugs feature a dual screw fastening system that can accept bare speaker wire from 10 to 18 AWG. Each pair comes with one plug color coded red and the other coded black, for easy polarity identification.
The plug body is made of copper fitted with a ferromanganese tip. The entire plug is then plated with gold to help prevent corrosion.
Features:
- Can accept bare wire and spades
- Color coded black/red rings for maintaining proper polarity
- Secure, positive contact with binding posts
- Corrosion resistant, 24K …

Right angle banana plugs make speaker installations easy. They are designed for use with amplifiers or speakers that use binding posts in spaces where a traditional banana plug will not fit. The right angle nature of these banana plugs minimizes the risk of cross terminal contact that may cause shorts.
These high quality plugs are the closed screw type and can accept bare speaker wire from 12 to 18 AWG. Each pair comes with one plug color coded red and the other coded black, for easy polarity identification.
The plug body is made of copper fitted with a ferromanganese tip. The entire plug is then plated with gold to help prevent corrosion.
Features:
- Can accept bare wire and spades
- …

This D‑Ring Panel fits into a standard 19" wide equipment rack. It features five closable D‑Rings, which can be used to enclose cables inside the rack. The rings measure 3.5"(H) by 3"(D) and are easily opened/closed.






Monoprice™ and all Monoprice logos are trademarks of Monoprice Inc.


Updated Aug 26, 2021

Connect your DisplayPort® equipped PC to a 4K HDMI® video display using this DisplayPort 1.2a to 4K HDMI Active Adapter from Monoprice™!
This adapter is designed to allow you to connect an HDMI display to a DisplayPort video output. It conforms to the DisplayPort 1.2a standard and supports HDMI resolutions up to 4K (3840x2160p) @30Hz. Being an active adapter, it is fully compatible with the AMD® Eyefinity and nVidia® Surround™ multidisplay modes.
It features a true 5" cable length with polycarbonate connector heads. The DP connector head measures 14.5 x 25.5 x 31.0 mm. The HDMI connector head measures 17.5 x 27.5 x 47.0 mm long.
Features:
- Conforms to DisplayPort …

Connect your DisplayPort® equipped PC to a 4K HDMI®, Dual Link DVI™, or VGA video display using this DisplayPort 1.2a to 4K HDMI, Dual Link DVI, and VGA Passive Adapter from Monoprice™!
This adapter is designed to allow you to connect an HDMI, DVI, or VGA display to a DisplayPort video output. It conforms to the DisplayPort 1.2a standard and supports HDMI resolutions up to 4K (3840x2160p) @30Hz, Dual Link DVI resolutions up to 2560x1600p @60Hz, and VGA resolutions up to 1920x1080p @60Hz. Being a passive adapter, it is NOT compatible with the AMD® Eyefinity and nVidia® Surround™ multidisplay modes. Note that only one of the three video outputs can be used at …

Connect your DisplayPort® equipped PC to a 4K HDMI®, Dual Link DVI™, or VGA video display using this DisplayPort 1.2a to 4K HDMI, Dual Link DVI, and VGA Passive Adapter from Monoprice™!
This adapter is designed to allow you to connect an HDMI, DVI, or VGA display to a DisplayPort video output. It conforms to the DisplayPort 1.2a standard and supports HDMI resolutions up to 4K (3840x2160p) @30Hz, Dual Link DVI resolutions up to 2560x1600p @60Hz, and VGA resolutions up to 1920x1080p @60Hz. Being a passive adapter, it is NOT compatible with the AMD® Eyefinity and nVidia® Surround™ multidisplay modes. Note that only one of the three video outputs can be used at …

Connect your DisplayPort® equipped PC to a DVI™ monitor using this DisplayPort 1.2a to DVI Active Adapter from Monoprice™!
This adapter is designed to allow you to connect a DVI monitor to a DisplayPort video output. It conforms to the DisplayPort 1.2a standard and supports DVI Dual‑Link output to resolutions up to 2560x1600p @60Hz. Being an active adapter, it is fully compatible with the AMD® Eyefinity and nVidia® Surround™ multidisplay modes.
It features a true 6" cable length with polycarbonate connector heads. The DVI end has panel screw holes, so you can secure the cable to the connector. The DP connector head …

Connect your DisplayPort® equipped PC to a VGA monitor using this DisplayPort 1.2a to VGA Active Adapter from Monoprice™!
This adapter is designed to allow you to connect a VGA monitor to a DisplayPort video output. It conforms to the DisplayPort 1.2a standard and supports resolutions up to 1920x1080p @60Hz. Being an active adapter, it is fully compatible with the AMD® Eyefinity and nVidia® Surround™ multidisplay modes.
It features a true 6" cable length with polycarbonate connector heads. The VGA end has panel screw holes, so you can secure the cable to the connector. The DP connector head measures 14.5mm thick, 25.5mm wide, …

Connect your DisplayPort® equipped PC to a VGA monitor using this DisplayPort 1.2a to VGA Active Adapter from Monoprice™!
This adapter is designed to allow you to connect a VGA monitor to a DisplayPort video output. It conforms to the DisplayPort 1.2a standard and supports resolutions up to 1920x1080p @60Hz. Being an active adapter, it is fully compatible with the AMD® Eyefinity and nVidia® Surround™ multidisplay modes.
It features a true 6" cable length with polycarbonate connector heads. The VGA end has panel screw holes, so you can secure the cable to the connector. The DP connector head measures about 15 x 26 x 31 mm. The VGA connector head measures about 20 x 42 …

Connect your DisplayPort® video output to a VGA monitor using this DisplayPort Male to VGA Female Active Adapter from Monoprice™!
This active adapter draws the necessary power from the DisplayPort connection. Being an active adapter, it is suited for use in an AMD® Eyefinity multi‑monitor setup. It uses a triple 10‑bit, 162MHz Video DAC to covert the digital DP video to analog VGA. It provides up to 5.4Gbps bandwidth over two lanes and supports the 1920x1080p resolutions and up to 1920x1200 maximum.

…

This D‑Ring Panel fits into a standard 19" wide equipment rack. It features five closable D‑Rings, which can be used to enclose cables inside the rack. The rings measure 1.75"(H) by 3"(D) and are easily opened/closed.






Monoprice™ and all Monoprice logos are trademarks of Monoprice Inc.


Updated Aug 26, 2021

Couple two 50-ohm coaxial cables using this BNC Female to Female Coupler from Monoprice!
This coupler is designed to mate two 50-ohm cables with BNC connectors, such as RG-58, RG-8, or RG-60. The entire assembly body and the electrical connections are gold plated for smooth, corrosion-free connections.

Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov

Gold plated adapter for converting "F" type connectors on Coax cables into RCA.PLEASE NOTE! Do not use these adapters to connect an RF antenna signal into a Composite video signal or visa versa. When using this for composite signals, you should have an RCA adapter on both ends.

Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov

This 4‑Port DisplayPort® 1.2 to DisplayPort Multi‑Stream Transport (MST) Hub enables three different display modes on up to four monitors connected to a single DisplayPort output. You can connect a single display at resolutions up to 4K@60Hz to mirror your computer's desktop. Add a second monitor and the hub will automatically extend the image to span the two displays at resolutions up to 4K@30Hz for each display. Connect four monitors and the hub automatically adjusts to produce a 2x2 "video wall", with the single image spanning the four displays at resolutions up to 1080p@60Hz for each monitor. This hub is ideal for digital signage and large video displays in schools, churches,…

This 2‑Port DisplayPort® 1.2 to DisplayPort Multi‑Stream Transport (MST) Hub enables two different display modes on up to two monitors connected to a single DisplayPort output. You can connect a single display at resolutions up to 4K@60Hz to mirror your computer's desktop. Alternatively, you can connect two monitors and the hub will extend the image to span the two displays at resolutions up to 4K@30Hz for each display. This hub is ideal for digital signage and large video displays in schools, churches, conference rooms, at trade shows, and in retail outlets.


…