Tool boxes Monoprice

Manage your power and signal cables behind your flat screen TV using this Recessed Low Voltage Mid‑Size Plate with Duplex Receptacle from Monoprice™!
This commercial grade wall plate features a tamper‑resistant NEMA® 5‑15 duplex power receptacle, which is rated for 15 amps and 125 VAC. The low‑voltage section features a flexible opening, which allows you to route your low‑voltage signal cables, while effectively hiding the opening in the wall. This plate includes metal mounting wings, so you can attach it directly to drywall without requiring the use of a separate low‑voltage mounting bracket.
Features:
- Low profile design fits behind the industry's …

Use this recessed low‑voltage cable plate with recessed power to install power and low voltage cables behind your flat panel TV, your amplifier, or other audio/video devices. The recessed low voltage cable plate with recessed power can be installed upright or inverted and will clean up the look of your entertainment center.
You can install this plate right over an existing outlet. Just remove the existing outlet and install this one in it's place. You'll then cut the drywall next to it to allow for the cable side of this plate. This is a two gang box, but it will install over a one gang outlet, and is designed for the drywall next to the existing outlet to be cut out. This box …

Make your own in-wall video cable installation look like it was done by a professional using this Recessed HDMI®/RCA Wall Plate from Monoprice!
This wall plate features a gold-plated female/female HDMI coupler and six gold-plated female/female RCA couplers, allowing you to use ordinary* video cables to connect on both sides of the wall plate. The insides of the RCA jacks are color coded for the Component video, Composite video, and stereo audio, so you can easily match the right connectors for your video installation.
Note that this requires the use of a single-gang, low-voltage mounting bracket (sold separately).
*IMPORTANT SAFETY WARNING! When running cables through the walls, always …

Versatile modular surface mount box for when in-wall box and wire installation are not possible. Use with keystones for the connector of your choice. A clean and simple solution for network expansion.Box is durable plastic, white in color. With UL listing info printed in small blue letters on box face.Comes with double sided adhesive mounting pad to mount the box to the wall, or you can use the two screws provided to screw it down to baseboard, window sill, trim, etc..Jacks are not included. Use our keystone jacks with this box except PID# 5370-5377, 5394, 5398, 5399.Comes with 2 zip ties to secure wires to box to prevent pull through.Box has two slits in the back side to allow the wires to …

Versatile modular surface mount box for when in-wall box and wire installation are not possible. Use with keystones for the connector of your choice. A clean and simple solution for network expansion.Box is durable plastic, white in color.Comes with double sided adhesive tape to mount the box to the wall, or you can use the two screws provided to screw it down to baseboard, window sill, trim, etc..Jack is not included. You can use any of our keystone jacks.Zip tie is included and used to hold the cable tight inside the box and keeps cables from moving.Box has a slit in the back side to allow the wire to enter the box for flush moutning. Box top snaps on and off for easy access to wires.

…

This white plastic box is a surface‑mounted Cat6 keystone box intended for use when in‑wall or other installations are not possible. The cover can be easily removed to allow access to the wire connections. Use a 110D or Krone type impact to crimp and connect the wires. It can be used with stranded or solid Cat6 cable of any gauge. It includes double‑sided tape and two screws, allowing you to choose the mounting method that best fits your needs. Installation instructions are included.






Support Files:
- User's Manual (Aug 14, 2012)
- Diagram (Feb 02, 2023)


Monoprice™ and all Monoprice logos are trademarks of Monoprice Inc.


Updated Jan 19, 2022 …

This white plastic box is a surface‑mounted dual Cat5e keystone box intended for use when in‑wall or other installations are not possible. The cover can be easily removed to allow access to the wire connections. Use a 110D or Krone type impact to crimp and connect the wires. It can be used with stranded or solid Cat5e cable of any gauge. It includes double‑sided tape and two screws, allowing you to choose the mounting method that best fits your needs. Installation instructions are included.






Support Files:
- User's Manual (Aug 14, 2012)


Monoprice™ and all Monoprice logos are trademarks of Monoprice Inc.


Updated Jan 19, 2022

Warning: This …

This white plastic box is a surface‑mounted Cat5e keystone box intended for use when in‑wall or other installations are not possible. The cover can be easily removed to allow access to the wire connections. Use a 110D or Krone type impact to crimp and connect the wires. It can be used with stranded or solid Cat5e cable of any gauge. It includes double‑sided tape and two screws, allowing you to choose the mounting method that best fits your needs. Installation instructions are included.






Support Files:
- User's Manual (Sep 16, 2011)


Monoprice™ and all Monoprice logos are trademarks of Monoprice Inc.


Updated Jan 19, 2022

Warning: This product …

Wall plate with high quality gold plated binding posts for speakers.

Can be used with banana plugs, spades, or bare wire.
Same type of connector front and back.
No soldering required.
Corrosion resistant gold plated connectors.

* Not compatible with PID# 2944 or 2945 banana plugs. This product can either be used with banana plugs (product ID 2801 or 2943) or it can accept bare wire connections on both the front and rear of the plate.

*Monoprice continually strives to improve its product line to bring our customers the best products available. Therefore, changes may be made to listed specifications without prior notice. Item received may not match photo or specs shown. *The color …

Wall plate with high quality gold plated binding posts for speakers.

Can be used with banana plugs, spades, or bare wire.
Same type of connector front and back.
No soldering required.
Corrosion resistant gold connectors.

Spacing is compatible with PID# 2944 & 2945 banana plugs. This product can either be used with banana plugs (product ID 2801 or 2943) or it can accept bare wire connections on both the front and rear of the plate.

*Monoprice continually strives to improve its product line to bring our customers the best products available. Therefore, changes may be made to listed specifications without prior notice. Item received may not match photo or specs shown. *The color indicated …

Wall plate with high quality gold plated binding posts for speakers.

Can be used with banana plugs, spades, or bare wire.
Same type of connector front and back.
No soldering required.
Corrosion resistant gold connectors.Spacing between plugs is .8 inch from center to center.

Spacing is compatible with PID# 2944 & 2945 banana plugs.
This product can either be used with banana plugs (product ID 2801 or 2943) or it can accept bare wire connections on both the front and rear of the plate.

*Monoprice continually strives to improve its product line to bring our customers the best products available. Therefore, changes may be made to listed specifications without prior notice. Item received …

Wall plate with high quality gold plated binding posts for speakers.

Can be used with banana plugs, spades, or bare wire.
Same type of connector front and back.
No soldering required.
Corrosion resistant gold plated connectors.

Spacing is compatible with PID# 2944 & 2945 banana plugs.
This product can either be used with banana plugs (product ID 2801 or 2943) or it can accept bare wire connections on both the front and rear of the plate.

*Monoprice continually strives to improve its product line to bring our customers the best products available. Therefore, changes may be made to listed specifications without prior notice. Item received may not match photo or specs shown. *The …

Wall plate with high quality gold plated binding posts for speakers.

Can be used with banana plugs, spades, or bare wire.
Same type of connector front and back.
No soldering required.
Corrosion resistant gold plated connectors.

Spacing is compatible with PID# 2944 & 2945 banana plugs.
This product can either be used with banana plugs (product ID 2801 or 2943) or it can accept bare wire connections on both the front and rear of the plate.

*Monoprice continually strives to improve its product line to bring our customers the best products available. Therefore, changes may be made to listed specifications without prior notice. Item received may not match photo or specs shown. *The …

Wall plate for use in conjunction with gang box and keystones. Use appropriate keystones to create a nicely finished, professionally installed look for Ethernet networks or Home Theater interconnects. Eliminate that cluster of wires and hide them behind a wall.


*Monoprice continually strives to improve its product line to bring our customers the best products available. Therefore, changes may be made to listed specifications without prior notice. Item received may not match photo or specs shown.
The color indicated can vary in tone and/or hue between production runs and manufacturing facilities. The color of this item may not be an exact match to any other product, even if they are …

Give your in-wall low-voltage cable installation a professional appearance using this 2-Gang Recessed Low Voltage Cable Wall Plate from Monoprice!
This 2-gang wall plate features a 2.9" x 1.9" opening in the face for routing a low-voltage cable into a wall. It requires the use of a 2-gang, low-voltage mounting bracket (not included).


Support Files:
- Dimensions Diagram (Aug 10, 2009)

Give your in-wall low-voltage cable installation a professional appearance using this 1-Gang Recessed Low Voltage Cable Wall Plate from Monoprice!
This single-gang wall plate features a 1.3" x 1.9" opening in the face for routing a low-voltage cable into a wall. It requires the use of a single-gang, low-voltage mounting bracket (not included).


Support Files:
- Dimensions Diagram (Oct 13, 2009)

Install wall plates without the need for a full in-wall electrical box using this 1-Gang Low Voltage Mounting Bracket from Monoprice™!
This mounting bracket allows you to install a wall plate for use with low-voltage cables, such as audio, video, and network cable connections. The bracket can be adjusted to fit drywall/paneling from 1/4" to 1" thick. The bracket measures 2.2" x 3.6" and is both UL® and CSA® certified.
Note: The color indicated can vary in tone and/or hue between production runs and manufacturing facilities. The color of this item may not be an exact match to any other product, even if they are indicated as being the same color, whether sold by Monoprice or any …

DataComm Electronics' Brush Plate Décor Insert is used to install low voltage cables behind your HDTV, amplifier, or other audio or video devices. The Brush Plate Décor Insert is designed to be installed into a low voltage mounting bracket (sold separately) that is installed into the wall.
Features:
- Low profile design fits behind the industry's thinnest mounts and TVs
- Conceal multiple low voltage cables behind your flat panel TV
- Easily holds up to 6 cables
- Mounts flush with a décor style wall plate (included)
- Mounts to a standard low voltage mounting ring, old work ring, or mud ring


Support Files:
- Features Sheet (Oct 10, 2022)


Warning: …

Wall plate for use in conjunction with gang box and keystones. Use appropriate keystones to create a nicely finished, professionally installed look for Ethernet networks or Home Theater interconnects. Eliminate that cluster of wires and hide them behind a wall.


*Monoprice continually strives to improve its product line to bring our customers the best products available. Therefore, changes may be made to listed specifications without prior notice. Item received may not match photo or specs shown.

Blank insert for keystone wall plates. Use to cover unused holes and remove when ready for expansion.


*Monoprice continually strives to improve its product line to bring our customers the best products available. Therefore, changes may be made to listed specifications without prior notice. Item received may not match photo or specs shown.
The color indicated can vary in tone and/or hue between production runs and manufacturing facilities. The color of this item may not be an exact match to any other product, even if they are indicated as being the same color, whether sold by Monoprice or any other vendor. Individual pieces may also vary very slightly in color from each other.

Warning: …