Nails, Screws, Fasteners Arrow

The Arrow Fastener WA1/8 1/8-inch aluminum washer is ideal for joining soft materials or when an existing hole is oversized. Made with durable construction.

Arrow's 1/8-inch steel washers are intended for use with steel rivets that have a 1/8-inch hole-rivet diameter. Use washers when joining soft materials or when an existing hole is oversize.

These Arrow Fastener aluminum washers are durably constructed and ideal for use with rivets when joining soft, pliable materials or when working with oversized or irregular holes. The easy to use washers are conveniently available in a 30 count and measure 3/16-inch. These washers are durably constructed and ideal for use with rivets when joining soft, pliable materials or when working with oversized or irregular holes.

Produces a strong, permanent, tamper-proof joint quickly and easily. Rivet will not strip out or vibrate loose like threaded fasteners.

Produces a strong, permanent, tamper-proof joint quickly and easily. Rivet will not strip out or vibrate loose like threaded fasteners. For joining sheet metal, aluminum, fabrics, plastics and leather. Use on metal cabinets, aluminum doors and windows.

Quickly and easily produce a strong, permanent and tamper proof joint with the Arrow Fastener short aluminum rivet industrial pack. Durably constructed to prevent rivet from stripping out or vibrating loose like threaded fasteners.

Produces a strong, permanent, tamper-proof joint quickly and easily. Rivet will not strip out or vibrate loose like threaded fasteners. For joining sheet metal, aluminum, fabrics, plastics and leather. Use on metal cabinets, aluminum doors and windows.

The Arrow Fastener RSS1/8IP short steel rivet 1/8-inch wide by 1/8-inch comes with 100 pieces in each box. Quickly and easily produce a strong, permanent and tamper proof joint with the Arrow Short Steel Rivet Industrial Pack. Durably constructed to prevent rivet from stripping out or vibrating loose like threaded fasteners. Specially designed for joining sheet metal, aluminum, fabrics, plastics or leather and for use on metal cabinets, aluminum doors and windows, metal fixtures, automobiles, heating ducts, gutters or downspouts.

Used for general repairs, trim and molding, all finish carpentry work, flooring and picture framing, Arrow Brad Nails are small 18 gauge nails up to 2 inch long. Because they are thinner in cross section, they are less likely to split decorative molding as they leave a very small hole.

The Arrow RMA3/16IP is specially designed for joining sheet metal, aluminum, fabrics, plastics or leather and for use on metal cabinets, aluminum doors and windows, metal fixtures, automobiles, heating ducts, gutters or downspouts.

Quickly and easily produce a strong, permanent and tamper proof joint with Arrow Fastener medium steel rivet industrial pack. Durably constructed to prevent rivet from stripping out or vibrating loose like threaded fasteners. Specially designed for joining sheet metal, aluminum, fabrics, plastics or leather and for use on metal cabinets, aluminum doors and windows, metal fixtures, automobiles, heating ducts, gutters or downspouts. The carded industrial pack is available in a 100 count, 1/8-inch diameter and 1/4-inch grip max.

Used for general repairs, trim or molding and picture framing, the 23-gauge arrow pin nails are the thinnest and shortest of all finishing nails. They do not have a nail head, so they leave a very small hole in the wood and therefore do not typically require putty. One drawback is they offer limited holding strength.

Quickly and easily produce a strong, permanent and tamper proof joint with the Arrow Fastener long aluminum rivet pack. Durably constructed to prevent rivet from stripping out or vibrating loose like threaded fasteners and specially designed for joining sheet metal, aluminum, fabrics, plastics or leather and for use on metal cabinets, aluminum doors and windows, metal fixtures, automobiles, heating ducts, gutters or downspouts.

The 23-gauge arrow pin nails are the thinnest and shortest of all finishing nails. They do not have a nail head, so they leave a very small hole in the wood and therefore do not typically require putty. One drawback is they offer limited holding strength.

Arrow Brad Nails are small 18 gauge nails up to 2 inch long. Because they are thinner in cross section, they are less likely to split decorative molding as they leave a very small hole.

Quickly and easily produce a strong, permanent and tamper proof joint with the Arrow White Short Aluminum Rivet Industrial Pack. Durably constructed to prevent rivet from stripping out or vibrating loose like threaded fasteners. Specially designed for joining sheet metal, aluminum, fabrics, plastics or leather and for use on metal cabinets, aluminum doors and windows, metal fixtures, automobiles, heating ducts, gutters or downspouts. The carded industrial pack is available in a 100 count, 1/8-inch diameter and 1/8-inch grip max. Made in the USA. For use with Arrow model RH200S, RHT300, and RL100S.

Used for general repairs, trim or molding and picture framing, the 23-gauge arrow pin nails are the thinnest and shortest of all finishing nails. They do not have a nail head, so they leave a very small hole in the wood and therefore do not typically require putty. One drawback is they offer limited holding strength.

Used for general repairs, trim and molding, all finish carpentry work, flooring and picture framing, Arrow Brad Nails are small 18 gauge nails up to 1-1/4 in. long. Because they are thinner in cross section, they are less likely to split decorative molding as they leave a very small hole.

Produces a strong, permanent, tamper-proof joint quickly and easily. Rivet will not strip out or vibrate loose like threaded fasteners. For joining sheet metal, aluminum, fabrics, plastics and leather. Use on metal cabinets, aluminum doors and windows.

The Arrow Fastener short aluminum rivet measures 3/16-inch wide by 1/8-inch length. Each box has 50 pieces. Quickly and easily produce a strong, permanent and tamper proof joint with Arrow Fastener short aluminum rivet industrial pack. Durably constructed to prevent rivet from stripping out or vibrating loose like threaded fasteners. For use on metal cabinets, aluminum doors and windows, metal fixtures, automobiles, heating ducts, gutters or downspouts.

The BN18 genuine Arrow brad nails are made from quality 18-gauge steel for quality nailing applications and long-lasting durability. In 15 mm, 20 mm, 25 mm, 32 mm, 38 mm and 50 mm lengths, some with brown- and white-colored heads to help disguise their use on wood, these light duty nails are perfect for fixing moldings. Compatible with the arrow T50 heavy duty staple guns and other leading brands.

The 23-gauge arrow pin nails are the thinnest and shortest of all finishing nails. They do not have a nail head, so they leave a very small hole in the wood and therefore do not typically require putty. One drawback is they offer limited holding strength.