Taps, Valves & Fittings

Malleable Iron Pipe Bushing: 3/4 x 1/8" Fitting

Galvanized Pipe Nipple: 3/4", 1-3/8" Long, Schedule 40, Steel

Black Pipe Nipple: 1" Dia x 1-1/2" Long, Schedule 40

Galvanized Pipe Nipple: 1-1/4", 3" Long, Schedule 40, Steel

Worm Gear Clamp: Worm Drive, SAE 16, 11/16 to 1-1/2" Dia, Stainless Steel Band

Worm Gear Clamp: Worm Drive, SAE 10, 9/16 to 1-1/16" Dia, Stainless Steel Band

Worm Gear Clamp: Shielded Worm Drive, SAE 10, 11/16 to 1-1/16" Dia, Stainless Steel Band

Black Pipe Nipple: 1/2" Dia x 2-1/2" Long, Schedule 80

Black Pipe Nipple: 1/8" Dia x 2-1/2" Long, Schedule 80

Compression Tube Nut: 5/16-24, 1/8" Tube OD, NPT

Lead-Free Brass Flared Tube Connector: 3/8" OD, 45 deg Flared Angle

Black Reducing Coupling: 3/4 x 1/4", Threaded

Anvil International offers the broadest line of malleable iron fitting in black finish. Every fitting is manufactured and tested to meet Anvil’s strict quality standards. All Anvil Class 150 malleable iron fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 inch (10 DN) and larger are 100 percent gas tested at a minimum of 100 PSI (6.9 bar).

Malleable Iron Pipe 90 ° Street Elbow: 3/8" Fitting

Black Pipe Nipple: 1/4" Dia x 3-1/2" Long, Schedule 40

Drain, Waste & Vent 90 deg; Elbow: 1-1/4" Fitting, Hub x Hub, Acrylonitrile Butadiene Styrene

Industrial Pipe End Cap: 1/4-18 Female Thread, FNPT

Push-to-Connect Fitting: Plug

Malleable Iron Pipe Reducing Coupling: 1/2 x 1/8" Fitting

3/4 x 1/2 x 1/2" CPVC Plastic Pipe Tee

Black Pipe Fittings: Fitting Type: Tee; Fitting Size: 3/8"; End Connections: Threaded; Material: Malleable Iron

3/8" Compression Inlet, 7/8" Ballcock Outlet, Reinforced PVC Closet Supply Line

Brass Flared Tube Refrigeration Nut: 1/4" OD, 45 deg Flared Angle

Black Pipe Nipple: 1/4" Dia x 3" Long, Schedule 80