Water Metres

Pilot assembly for natural gas water heater, assembly kit works on the following model number 640YORS, 640YORSD and 650YORT4. Temperature setting is 170 degree Fahrenheit.

Fits Reliance natural gas standard Ultra Nox water heaters with Honeywell gas valve with LED blinking-light, *fits 30, 40 and 50 gallon natural gas units only, *Includes pilot tube, igniter, igniter wire, 750 millivolt generator and bracket, *Works with Ace 4295515, 4295473, 4295481, 4307005, 4395679, 4395711, 4587762, 4582425, 4595047, 4595039, 4582417, 4595021, 4595013, 4595005, and 4594990

Piezo Igniter device provides safe method to ignite heater pilot fuel source without need for matches or other fuel lighting devices.

Ultra Low NOx Electronic Gas thermostat control Valve that provides precise temperature control and operational status. Powered by 750 Millivolt Generator, Noticable L-E-D Indicator Light Blinks one Time at Three Second Intervals During Normal Operation, Increased Temperature Control and Accuracy, Intergral Spark Igniter, Fits Reliance Standard Natural Gas Ultra LOW NOx Water Heaters with electronic thermostat control.

Anode rod extends tank life by providing water heater from corrosion, 32 in. length fits many tanks, can be cut to fit shorter tanks, sturdy magnesium construction magnesium anode rod commonly used in water heaters affected by soft-water, at least once per year flush heater tank, inspect anode rod and replace when necessary to help extend tank protection.

Fits most water heater models of leading brands, including Reliance, State, AO Smith, Whirlpool, US Craftmaster, American, Bradford White, General Electric, GS Wood, Kenmore, Lochinvar, Maytag, Mor-Flo, Rheem, Richmond, Ruud.

Fits most water heater models of leading brands, including Reliance, State, AO Smith, Whirlpool, US Craftmaster, American, Bradford White, General Electric, GS Wood, Kenmore, Lochinvar, Maytag, Mor-Flo, Rheem, Richmond, Ruud.

The electric water heater installation kit includes everything you need to install or replace the connectors of your water heater. This kit will save you shopping time by including all the necessary components that you need for your water heater installation, no need to look individually for each part! The end connections are built to provide a safe and solid bond that will prevent any disconnects and leaks for many seasons, equipped with a dielectric sleeve.

Reliance electric thermostat 120/240 volt universal thermostat with ECO for single element water heaters double wired for simultaneous operation clamshell.

The lower thermostat for double element water heater thermostat can be used on most residential electric water heaters. Thermostats are set at 120 degree Fahrenheit and are adjustable between 110 degree Fahrenheit and 160 degree Fahrenheit. The reliance thermometer includes a safety energy cut off, that cuts off all power to the heater should internal tank temperature reach 190 degree Fahrenheit. It fits water heaters with Apcom, Robertshaw and Therm-O-Disc thermostats. It is made with high quality construction for premium performance and long lasting use.

"Water Heater Installation Kit. 15"",Dual, Flexible 3/4"" female iron pipe thread union for Gas or Electric water heaters. One end fits directly on to a factory installed 3/4""male pipe thread water connection nipple."

PEX polymer lined nipples comply with dielectric waterway fittings requirements of many municipal plumbing codes. Dielectric waterway nipples help protect the tank from corrosion caused when a dissimilar metal like copper is connected directly to the tank. High quality PEX nipples will not corrode shut, leak or clog with lime scale like plain galvanized nipples commonly do.

"Universal, water heater element gasket kit, includes 1 screw in gasket, 1 universal flange gasket, 1 four hole gasket, & four 1/4"" x 3/4"" x 20 hex bolts, everything to install flat, screw in, & universal flange elements."

Water heater element wrench is designed to help you install and remove water heater elements. It works with a screwdriver and fits 1-1/2 inch nuts. Its 5 inch length allows safe installation over adjustable wrench capabilities. This water heater element tool features an enhanced torque and a zinc plated steel body.

Water Heater Element Adapter Kit. Will adapt square or round flange bracket to threaded element. 1 kit per card. Kit includes: 1 round gasket, 2 plates, 4 stove bolts and nuts and 4 self tapping screw

Reliance Electric Water Heater Tune-Up Kit - Included in the Electric installation kit are a Reliance standard high watt density element for the upper element, upgraded low watt density element for the lower element, universal upper thermostat and protector and universal lower thermostat and protector. 4500W/ 240V.

UNIVERSAL FLANGE WATER HEATER ELEMENT Replaces either round head or flat flange elements. Fits most models not using screw in flange elements Contains: 1-UF element and 1-UF gasket. 1500 W, 240 V 8 Min. Tank Dia.

Universal Flange Water Heater Element. 3800W/240V . 12 In. Tank Diameter. 4 hole square flange bracket. Supplied with square gasket. Fits most makes and models that do not use screw in flanges

Universal Flange Water Heater Element. 2500 W, 240V, 10 in. Min. Tank Diameter, 4 hole square flange bracket. Supplied with square gasket. Fits most makes and models that do not use screw in flanges.

"Electric water heater Heating Element,,1500W,120V,6"",CPR,10.Includes 1-UF heating element and 1-UF gasket"

"3800W, 240V, Standard, Copper Sheath Electric Heating Element, For Electric Water Heaters, Designed For High Watt Density Operation, TR Threaded Flange, 221 Watt Per SQIN, 12"" Minimum Tank Diameter."

High watt density contains element and gasket fits Ace, State, Reliance, Sears, Rheem, Rudd, Montgomery Ward and others used with adapter kit fits most water heaters 1 inch screw in flange.

"Screw-In Water Heater Element. 1500W/ 240V. 1"" Copper-Sheath element. 8"" Minimum Tank Diameter.The most popular element in use today."

"Screw-In Water Heater Element. 2000W / 120V, 1"" Copper Sheath Element. 12"" Minimum Tank Diameter. Threaded flange."