Other for Irrigation

Unique two-stage screening process prevents grit from siphoning back into pipes. Protects against freezing by automatically draining pipes when water is turned off.

Toro's 570Z pro series fixed spray sprinklers are tougher by design. Ideal for small lawn and shrub areas, the 570Z is designed for water efficiency without sacrificing results. The durable zero flush seal prevents water waste due to wear and at system start up. This means you can install more sprinklers per zone.

"Rebuild kit for 3/4"" valves"

This flexible tubing riser allows bending but resists breaking, making it a great option for placing sprinkler heads in hard-to-reach and out-of-the-way areas

Got a hole in tubing you dont want? Goof plugs to the rescue! These sturdy plugs eliminate the laborious task of removing, sizing, and replacing damaged tubing by sealing holes on the spot. Our goof plugs have different sized ends and are designed to plug holes small or large. Push them in by hand; a fitting inserter tool such as the 3-in-1 Hole Punch Tool or 4-in-1 Cut N Punch Tool will also do the trick. Works on 1/2 in., 5/8 in., and 0.710 in. tubing. The plugs come conveniently attached together and snap off when ready to use. Goof plugs are made of polypropylene (PP) treated with UV inhibitors.

Replaces worn out or damaged diaphragms for Orbit's 3/4 In. (57100) and 1 In. (57101) internal bleed valves.

To make your underground sprinkler system also function as a low-flow drip irrigation system, this is the adapter you need. The 1/2 in. FPT X 1/4 in. Sprinkler Riser to Drip Tubing Conversion Adapter threads onto the sprinkler riser & outlets through the sprinkler head on top as well as through the 1/4 in. supply tubing or dripline inserted into the side compression ring. A filter washer inside the adapter ensures a watertight fit and screens out particles before they can clog the system. This adapter is made of acrylonitrile butadiene styrene (ABS) treated with UV inhibitors to prevent cracking.

Orbit drip irrigation products directly apply water to designated areas, helping saving water while providing beautiful results.

Get supply tubing to stay just where you want them with the Universal Tubing Hold-Down Hook Stake. The 8 in. long stake, also known as a shepherds hook stake, is curved at the top to hold supply tubing of any size in place. Users find the one-prong design is easier to work into rockier soil than two prongs. Stays put, yet easy to remove when you need to expand or change your drip system. Excellent for keeping an emitter attached to tubing near the plants root zone without worry of straying. Use in flower gardens, vegetable gardens, and around trees, shrubs, and container plants; also holds down chicken wire or tarp for other garden projects. Made of galvanized steel and withstands extreme climate …

The Orbit Diaphragm for Jar-Top Sprinkler Valves is made from rugged Santoprene to help it last a long time. Use the diaphragm as a replacement for lost or damaged diaphragms on Orbit automatic jar-top sprinkler valves (not included).

Make a 90 turn in your drip system using the 1/2 in. Compression Elbow. The El fitting joins two sections of 1/2 in. supply tubing or dripline at an angle to prevent kinking. Insert tubing inside the compression ring, where a barb compresses the tube to create a watertight connection. Attach by rocking the tubing back and forth while applying pressure; for tough tubing, soak in hot water or leave out in the sun to make it more pliable. This compression fitting is made of acrylonitrile butadiene styrene (ABS) treated with UV inhibitors to prevent cracking.

Add height to the emitter in your drip system using the 8 in. Sprinkler Stake with 4 in. Riser. Fits a low-flow sprinkler, sprayer, or jet with a 1/4 in. barbed inlet or 10-32 threaded inlet on top of the riser. The riser sits on top of the sprinkler stake, where a barbed inlet fits 1/4 in. supply tubing. Position stake to provide convenient overhead watering to your plants. Your hand-watering days are over! The riser is made of polyethylene and the stake is made of acrylonitrile butadiene styrene (ABS), both treated with UV inhibitors.

Use the Hole Punch Tool to make installing your drip system quick, easy, and hassle-free. The hole puncher features a solid metal tip to pierce 1/2 in., 5/8 in., and 0.710 in. supply tubing for insertion of 1/4 in. fittings and drippers. Saves time when you build, expand, or repair your drip system - simply position tubing in the adjustable holder (which has a sliding shelf to accommodate larger-sized tubing) and press the handgrip down to punch the hole. This tool is a sure-fire solution for reliable, repetitive punching. The Hole Punch Tool is made of polypropylene (PP) treated with UV inhibitors.

Provide lift to a sprinkler, sprayer, or jet with the 13 in. Sprinkler Stake with 8 in. Adjustable Riser. Simply install a low-flow emitter with 1/4 in. barbed inlet or 10-32 threaded inlet to the top of the riser, and adjust height of the riser to your preference by moving it up or down on the snap-fit clamp. Connect 1/4 in. supply tubing to the1/4 in. barbed inlet at the bottom of the rigid riser; then place stake into ground for overhead watering where you want it. The riser is made of polyethylene and the stake is made of ABS, both treated with UV inhibitors.

Repair Kit Stem Assembly Rebuild Kit for 3/4-Inch Valves (100 200 300 and 466 Series) 91011

Toro's H2FLO Precision Series sprinklers and nozzles are the most complete and efficient spray nozzle available.

Create a larger drip wetting area up to 6 ft. circle with this unique bubbler that is self-piercing for insertion directly into 1/2 in. drip irrigation tubing. It adjusts from 0 ft. to 3 ft. throw for shrubs, trees, closely spaced plant groupings. Other landscape watering applications requiring higher flow than spot emitters or drippers.

Add a T intersection to create a lateral line or branch in your drip system with the 1/2 in. Compression Tee. The fitting joins three sections of 1/2 in. supply tubing or dripline. To install, insert tubing inside the compression ring, where an internal barb compresses the tubing for a watertight connection. Having trouble with the tubing? Try rocking it back and forth while applying pressure, or soften the tube with a hot water soak or leaving it out in the sun. This compression fitting is made of acrylonitrile butadiene styrene (ABS) treated with UV inhibitors to prevent cracking.

Connect supply tubing or dripline to a faucet or other 3/4 in. male hose thread connection using the Smart Loc Universal Swivel Adapter. The unique design of the fitting accommodates tubing and dripline of multiple sizes: 1/2 in., 5/8 in., and 0.710 in., and attaches with a secure seal. The blue swivel end smoothly rotates 360 to prevent tubing from kinking or bending. Reusable fitting is made of acrylonitrile butadiene styrene (ABS), and comes with a filter washer.

This flexible tubing riser allows bending but resists breaking, making it a great option for placing sprinkler heads in hard-to-reach and out-of-the-way areas

Set up your drip irrigation system with ease with the Adjustable Flow Bubbler Assembly. The bubbler comes preassembled and is ready to install. Snap on the patented Clamp N Pierce inlet into supply tubing by hand-no tools necessary. The 4-stream bubbler emits water in a half-circle pattern at up to 13 GPH and radius of 3 ft. (at 15-50 PSI). Twist the dial to control the amount of output. Bubbler and tubing are made of polyethylene; stake and connector are made of ABS; all materials are treated with UV inhibitors.

Uniformly sprays individual streams over a circular area with an adjustable diameter. Ideal for watering ground cover, hillsides, flower beds, new plantings and seed germination.

Toro's H2FLO Precision Series sprinklers and nozzles are the most complete and efficient spray nozzle available.

This 4 port manifold continues to be the number one choice by homeowners. This versatile manifold includes the threaded outlet caps if not all ports are in use.