Other for Irrigation

The flow adjustable full-pattern sprinkler on 12 in. stake is ideal for watering flowers and shrubs and includes an adjustment knob to vary spray distances from 5ft. to 10ft. Orbit Irrigation Products, Inc. is one of the world's fastest growing manufacturers and supplier of irrigation and misting products for residential and commercial markets.

The Mushroom Bubbler is perfect for watering small areas of flowers, shrubs and trees. The water flow adjusts from a light trickle to full flow. It contains a filter for preventing debris from clogging the nozzle and it's made of durable plastic with a 1/2 in. female threaded inlet.

Orbit 53363 PVC fitting connects garden hose to 3/4 in. pipe by a threaded swivel fitting. 3/4 inch female threaded x female hose threaded PVC swivel.

"This durable Shrub Head sprinkler comes with and easy to adjust spray pattern, between 25 and 360 degrees and an adapter to fit on 1/2"" male threaded risers. Included is a filter that prevents debris from clogging nozzle"

The Champion Irrigation P191P series plastic shrub sprinklers with filters are made from impact-resistant ABS construction with female national pipe thread (NPT).

This 1/4 inch Polyflex Riser Stake helps you apply water like a spray head on an underground system. The stake holds spray devices above plants. This way, the spray achieves good water coverage.

The Champion Irrigation P191P series plastic shrub sprinklers with filters are made from impact-resistant ABS construction with female national pipe thread (NPT).

Ready to install, the Winged Jet Assembly comes preassembled with the sprayer, riser, barbed inlet, and stake. Set up is simple-put stake in the ground, set the riser height, then connect 1/4 in. tubing to the 1/4 in. inlet. Fan spray emits water in a full-circle pattern at up to 31.4 GPH and radius of up to 5.4 ft. (at 15-50 PSI). The winged jet, designed like the winged nut, has thumb grips to remove easily for cleaning. Provides low volume overhead irrigation for gardens, flower beds, ground cover, and hillsides. Assembly is made of polyethylene treated with UV inhibitors.

"Blu-Lock is the cleanest, fastest, most reliable way to build and maintain an environmentally-friendly, professional sprinkler system. With the revolutionary ""push-and-go"" design, simply insert pipe into fitting to create a secure, leak-free connection. No Clamping, No Gluing, No Waiting. Compatible with Hydro-Rain and Eco-Lock push fittings and pipe. WARNING: For non-mainline cold water outdoor irrigation connections only. Do not insert fingers"

"Blu-Lock is the cleanest, fastest, most reliable way to build and maintain an environmentally-friendly, professional sprinkler system. With the revolutionary ""push-and-go"" design, simply insert pipe into fitting to create a secure, leak-free connection. No Clamping, No Gluing, No Waiting. Compatible with Hydro-Rain and Eco-Lock push fittings and pipe. WARNING: For non-mainline cold water outdoor irrigation connections only. Do not insert fingers"

This durable Shrub Head sprinkler comes with and easy to adjust spray pattern, between 25 and 360 degrees and an adapter to fit on 1/2 in. male threaded risers. The nozzle attaches to all popular brands of pop-up sprinklers. Included mesh filter prevents clogging by debris.

"Add a 90 bend in your distribution line without worry about the tube kinking with the 5/8 in. Compression Elbow. Also known as an ""El"", the fitting joins two sections of 5/8 in. supply tubing or dripline with a watertight connection. The tubing end is inserted inside the fitting using a back-and-forth motion while applying pressure (Tip - for stiff tubing, soak the ends in hot water or leave out in the sun to soften the material). Made of acrylonitrile butadiene styrene (ABS) treated with UV inhibitors to prevent cracking."

The Toro flood bubbler has a full circle pattern for slow, deep watering around trees, shrubs and vegetable gardens. It is fully adjustable from off to 2 GPM and a 0 to 2 feet. radius. The Toro flood bubbler can be mounted on a 1/2 inch. NPT riser for non-traffic areas.

The 5 inch spray guard protects your sprinklers from lawn overgrowth that can affect optimal spray patterns. Made of durable plastic construction, the guard can withstand extreme temperatures and impact. Molded in a solid green color to blend with your lawn. Fits spring loaded pop ups, gravity pop ups and fixed pattern sprinklers of all manufacturers

Rain Bird 1300 series flower bubblers provide a controlled, gentle umbrella of water for irrigating trees, flowers and shrub areas. Mount these bubblers on 1/2 inch male risers to effectively water areas from 1 to 3 feet.

This plastic sprinkler head mounts flush with the ground and has a quarter-circle spray pattern. The flow and spray easily adjust from 10 ft. to 15 ft. in diameter using the flow-adjustment screw.

Seal off the end of your tubing with the 5/8 in. Compression End Cap. Connect to the end of 5/8 in. distribution tubing or dripline to stop the flow of water; removable cap makes it easy to flush out the line as needed or to expand your system. To fasten, insert the tubing into the compression ring, where an internal barb compresses the tube. Having trouble getting the tubing to fit? Try softening the tube ends by soaking in hot water or leaving out in the sun. The compression end cap is made of acrylonitrile butadiene styrene (ABS) treated with UV inhibitors to prevent cracking.

"Blu-Lock is the cleanest, fastest, most reliable way to build and maintain an environmentally-friendly, professional sprinkler system. With the revolutionary ""push-and-go"" design, simply insert pipe into fitting to create a secure, leak-free connection. No Clamping, No Gluing, No Waiting. Compatible with Hydro-Rain and Eco-Lock push fittings and pipe. WARNING: For non-mainline cold water outdoor irrigation connections only. Do not insert fingers"

Use the Winged Jet Assembly to spray gardens, flower beds, ground cover, and hillsides. The jet sprayer and 8 in. adjustable riser with 1/4 in. barbed inlet come preassembled on a 13 in. stake so it's ready to install-insert the stake, position the riser to preferred height, and connect 1/4 in. supply tubing to the inlet. Fan spray emits water in a quarter-circle pattern at up to 21.8 GPH and radius of up to 6.0 ft. (at 15-50 PSI). The winged jet, like the winged nut, features thumb grips to make it easy to remove for cleaning. Assembly is made of polyethylene treated with UV inhibitors.

Rain Bird 1800CAPS Spray Head Cap for 1800 Series Sprinklers. Use this threaded cap to quickly and easily cap off pop-up spray heads when converting to Drip irrigation. No digging required to cap a Rain Bird 1800 series sprinkler; simply twist off existing cap, remove the internal mechanism and screw on the new cap. Gasketed cap provides a leak-tight seal of any unused heads on the zone.

The Rain Bird EZ Pipe swing pipe system allows positioning underground sprinkler heads around hardscapes, terraces, plantings and uneven terrain. Absorbing shock from mowers and other traffic, this flexible tubing system helps minimize repairs and prolongs sprinkler life. Use Rain Bird EZ Pipe with spiral barb insert fittings and adapters to create flexible connections for your sprinklers.

This durable shrub head sprinkler comes with and easy to adjust spray pattern, between 25 and 360 degree and an adapter to fit on 1/2 inch male threaded risers. Included is a filter that prevents debris from clogging nozzle.

Provide lift to a sprinkler, sprayer, or jet with the 13 in. Sprinkler Stake with 8 in. Adjustable Riser. Simply install a low-flow emitter with 1/4 in barbed inlet or 10-32 threaded inlet to the top of the riser, and adjust height of the riser to your preference by moving it up or down on the snap-fit clamp. Connect 1/4 in. supply tubing to the 1/4 in. barbed inlet at the bottom of the rigid riser, then place stake into ground for overhead watering where you want it. The riser is made of polyethylene and the stake is made of ABS, both treated with UV inhibitors.

The Champion Irrigation P191P series plastic shrub sprinklers with filters are made from impact-resistant ABS construction with female national pipe thread (NPT).