Garden Sprinklers

Faucet drip tee filter, use to filter water before it enters the drip system, attaches directly to standard outdoor faucet 150 mesh removable filter, designed specifically for drip watering system, by more→removing debris, from the water supply, clogged drippers & spray nozzles are reduced, the mesh filter is easy to remove for cleaning.

The Brass End Plug is used to easily and effectively stop water flow at the end of a mist system line that uses a Slip-Lok fitting. The end of a Slip-Lok fitting can be removed by compressing the feru more→le of the Slip-Lok against the fitting body and then pulling the end plug away from the fitting. The end plug is compatible with any 3/8 inch mist cooling system.

The Brass Slip-Lock Elbow works with 3/8 inch nylon mist tubing and connects in seconds with a simple insert and twist motion. Use to assemble or repair your outdoor mist cooling system. The unique br more→ass Slip-Lock design can be used with both low and high pressure (up to 160 PSI) systems as the elbow actually grips tighter when the pressure increases. Additionally, the elbow and tubing can be disassembled by simply compressing the ferule against the body and pulling away from the tubing making the Slip-Lock elbow a versatile mist system fitting. *

The Brass Nozzle Plug is used in place of a mist nozzle on all outdoor mist cooling systems. These plugs are used to replace nozzles in the off-season when the mist system is not used and the mist noz more→zles are being stored. Nozzle plugs prevent debris and insects from entering the mist line and clogging the system.

The Mist Auto Drain Valve is an essential component for any outdoor mist cooling system. It is designed for installation in one of two ways: either thread it into a 10/24 female-threaded nozzle openin more→g or insert it into any professional Slip-Lok fitting. The auto drain valve is used to drain water from the mist line when it is not in use. It operates as a siphon by drawing the water out of the system once it is no longer pressurized. When installed at low points in the mist line, it works with gravity and allows water to automatically drain from the line; this reduces nozzle clogging and prolongs the life of your mist system.

The Brass Slip-Lock Coupling works with 3/8 inch nylon mist tubing and connects in seconds with a simple insert and twist motion. Use to assemble or repair your outdoor mist cooling system. The unique more→brass Slip-Lock design can be used with both low and high pressure (up to 160 PSI) systems as the coupling grips tighter when the pressure increases. Additionally, the coupling and tubing can be disassembled by simply compressing the ferule against the body and pulling away from the tubing, making the Slip-Lock coupling a versatile mist system fitting. *

The Brass Slip-Lock Elbow works with 3/8 inch nylon mist tubing and connects in seconds with a simple insert and twist motion. Use to assemble or repair your outdoor mist cooling system. The unique br more→ass Slip-Lock design can be used with both low and high pressure (up to 160 PSI) systems as the elbow actually grips tighter when the pressure increases. Additionally, the elbow and tubing can be disassembled by simply compressing the ferule against the body and pulling away from the tubing making the Slip-Lock elbow a versatile mist system fitting.

The brass and stainless steel mist nozzle is the most efficient and water conservative mist nozzle available today. It only uses one half gallon per hour per nozzle and features a sturdy brass body wi more→th stainless steel orifice. The nozzle requires simple maintenance, soaking periodically in misting nozzle cleaner to remove mineral deposits that may accumulate with usage.

This 8 port manifold continues to be the number one choice by homeowners. This versatile manifold includes the individual flow-control adjustments for each outlet. Threaded outlet caps if not all port more→s are in use. An easy access filter to prevent clogging.

Orbit drip irrigation products directly apply water to designated areas, helping saving water while providing beautiful results.

This 4 port manifold continues to be the number one choice by homeowners. An easy access filter to prevent clogging. Allows you to add 4 drip lines, while also continuing use of your shrub head.

This 4 port manifold continues to be the number one choice by homeowners. This versatile manifold includes the threaded outlet caps if not all ports are in use.

This 4 port manifold continues to be the number one choice by homeowners. This versatile manifold includes the manual flow control which regulates all four outlets. Threaded outlet caps if not all por more→ts are in use.

The Orbit 25 psi Faucet Regulator keeps water pressure to 25 psi. This reduces high pressure damage and drip system failure.

This 2 port manifold continues to be the number one choice by homeowners. This versatile manifold includes the following features threaded outlet caps if not all ports are in use. An easy access filte more→r to prevent clogging.

This 2 port manifold continues to be the number one choice by homeowners. This versatile manifold includes the following features threaded outlet caps if not all ports are in use. An easy access filte more→r to prevent clogging.

This 1 port manifold continues to be the number one choice by homeowners. This versatile manifold includes an easy access filter to prevent clogging and allows you to add drip watering to an existing more→shrub head.

The Orbit 1/2 inch PVC Hose Adapter is designed for use with 1/2 inch Schedule 40 PVC outdoor mist systems or wherever you need a connection between a standard 3/4 inch garden-hose thread and PVC pipe more→. The hose adapter has a slip fitting and requires PVC cement for watertight operation.

Turn an underground sprinkler system into a low-flow drip system that waters eight individual plants with the Hydro-Port Adjustable Eight outlet Bubbler. The emitter has a 1/2 in. FPT inlet which conn more→ects to a 1/2 in. MPT sprinkler riser and eight out letting ports. Attach 1/4 in. supply tubing to each port to deliver precise watering. Ideal for garden areas and perimeter landscaping. Best used with a pressure regulator to lower water pressure and keep tubing in place.

Drip irrigation is made easy with the Winged Jet Assembly. The sprayer, riser, barbed inlet, and stake come preassembled and ready to install. Insert the stake, set the riser height, and connect 1/4 i more→n. tubing to the 1/4 in. inlet. Fan spray emits water in a half-circle pattern at up to 28.2 GPH and radius of up to 5.6 ft. (at 15-50 PSI). The winged jet, like the winged nut, features thumb grips to make it easy to remove for cleaning. Provides low volume overhead irrigation for gardens, flower beds, ground cover, and hillsides. Assembly is made of polyethylene treated with UV inhibitors.

Dial in the right amount of spray your plants need with the Adjustable Flow Micro Sprinkler. Convenient knob on the side of the emitter lets you increase or decrease the volume of water emitted with a more→twist. Water is released in a fan spray, half-circle pattern at up to 23.9 GPH with an adjustable radius of up to 3.7 ft. (at 15-50 PSI). Ideal for groundcover, flower beds, planting beds, vegetable gardens, and new plantings. The 10-32 threaded inlet screws onto a rigid riser-no tools necessary to install. The Micro Sprinkler, also known as a Micro Sprayer, is made of polyethylene treated with UV inhibitors.

Dial in the right amount of spray your plants need with the Adjustable Flow Micro Sprinkler. Convenient knob on the side of the emitter lets you increase or decrease the volume of water emitted with a more→twist. Water is released in a fan spray, half-circle pattern at up to 23.9 GPH with an adjustable radius of up to 3.7 ft. (at 15-50 PSI). Ideal for groundcover, flower beds, planting beds, vegetable gardens, and new plantings. The 10-32 threaded inlet screws onto a rigid riser-no tools necessary to install. The Micro Sprinkler, also known as a Micro Sprayer, is made of polyethylene treated with UV inhibitors.