Audio-Technica Instrument Condenser AT5045P

The AT5045P is two of audio-technica’s Premier condenser instrument microphones in a stereo pair pack. Offering the performance of a large-diaphragm, side-address condenser in a CONVENIENT, stick-type Body, The AT5045, despite the space limitations imposed by its housing, boasts audio-technica’s largest single diaphragm. The instrument microphone’s circuitry has been honed to the essentials, allowing the AT5045 to achieve an unprecedented dynamic range that’s one of the widest of any microphone on the market. Every AT5045 is hand assembled and individually inspected for 100% quality control. Each microphone is enclosed in an elegant housing of aluminum and brass with a high-quality gray finish for durability and low reflectivity. Discrete components have been selected for optimized performance. The circuitry and capsule assembly are mounted as a single block within a floating internal shock mount, effectively Decoupling the capsule from the microphone Body for excellent vibration isolation. In fact, every aspect of the microphone has been carefully considered to minimize any negative effects on the audio signal. The AT5045P stereo pair pack comes with two AT5045 instrument mics, two of audio-technica’s innovative AT8481 isolation clamps, two AT8165 windscreens and a protective carrying case that holds a both AT5045 microphones. Available as a single microphone (AT5045) or as a stereo pair (AT5045P). features: audio-technica’s Premier studio condenser instrument microphone pure, realistic sound quality for overheads, percussion, acoustic Guitar, strings and other acoustic instruments side-address, stick-design microphone with more diaphragm surface area than most traditional large diaphragm side-address microphones discrete components carefully selected for optimized performance transformer-coupled output is optimized to provide smooth sonic character exceptionally low noise with high-SPL capability hand built and inspected for 100% quality control advanced internal shock mounting decouples the capsule from the microphone Body ELEGANT, durable housing of aluminum and brass innovative isolation clamp provides secure mounting, versatile positioning and effective dampening of unwanted mechanical noise available as a single microphone (AT5045) or as a stereo pair (AT5045P) custom hard-shell carrying case with die-cut foam compartments offers protection for one or two microphones specifications: Element: fixed-charge back plate, permanently polarized condenser polar pattern: cardioid frequency response: 20 to 20000Hz open circuit sensitivity: -35dB (17.7mV) Re 1V at 1 PA Impedance: 100 ohms maximum input sound level: 149dB SPL, 1kHz at 1% T.H.D. Noise: 8dB SPL dynamic range (typical): 141dB, 1kHz at maximum SPL signal-to-noise ratio: 86dB, 1kHz at 1 PA phantom power requirements: 48V DC, 1.4mA typical output connector: integral 3-pin XLRM-type Audio-Technica case style: R11 dimensions (L x dia.): 177 x 25mm/ 6.97 x 0.98" (Maximum body