Yamaha Tio1608-D 16-Input/8-Output Dante Stagebox for TF Series Mixers

The Yamaha Tio1608-D is a Dante-equipped I/O rack with 16 microphone/line inputs and 8 line outputs and features the same recallable D-PRE™ microphone preamplifiiers as the TF series. Users wishing to expand on the TF's already extensive input/output capability can easily add up to 3 units with the optional NY64-D expansion card (sold separately) and Tio1608-D I/O racks. Daisy-chaining the main console offstage and Tio1608-D I/O racks on stage using lightweight CAT5e Ethernet cables allows low-latency, high-quality sound transmission without the time-consuming transport and setup of bulky analog snakes. Using the Tio1608-D, you can easily configure a high-performance Dante stagebox system with little or no IT networking knowledge. Thanks to the flexibility of the Dante network protocol, TF Series consoles can be connected to an extensive range of Dante-enabled equipment such as R Series I/O racks. By enabling the QUICK CONFIG mode on the Tio1608-D, all the connection settings such as network settings and audio patching are set automatically making system configuration easy. After confirming QUICK CONFIG mode is activated on the TF console and Tio racks, simply set a UNIT ID for each Tio1608-D, then daisy chain the TF console and the Tio racks. Once the basic configuration is completed, you can easily assign inputs to best suit your system setup. By using the ALL INPUT function, users can assign all inputs to the Tio racks, the TF console, or a Mac/Windows PC instantly. Users can also change each input to receive signal from multiple locations so that users can effectively use all inputs. The Tio1608-D inherits the natural, musical sensibility that Yamaha pursued in the development of the TF Series. Mechanical construction, circuit board layout, power supply, grounding, and parts selection have all been executed with meticulous attention to detail and quality, combined with exhaustive performance and listening tests at each stage of development. The Tio1608-D features the same recallable D-PRE microphone preamplifiers as the TF Series to provide a consistent, natural, musical sound throughout the entire system.IncludesTio1608-D unitOwner's ManualPower Cord (2.5 m)Rubber Stoppers x4FeaturesDante-equipped I/O rack with 16 mic/line inputs and 8 line outsFast and easy Quick Config modeSimple and flexible input selectionRecallable D-PRE amplifiersFlexible system expansion via DanteSpecificationsSampling Frequency Rate - External: 44.1 kHz or 48 kHzTotal Harmonic Distortion: Less than 0.1% +4 dBu @20Hz - 20 kHz into 600 Ω, Gain = +66 dB / Less than 0.05% +4 dBU @ 20 Hz - 20 kHz into 600 Ω, Gain = -6 dB, INPUT to OUTPUT, Fs =44.1 kHz, 48 kHz (Measured with a -18 dB/octave filter @ 80 kHz)Frequency Response: +0.5, -1.5 dB 20 Hz - 20 kHz,refer to the nominal output level @ 1 kHz, INPUT to OUTPUT, Fs = 44.1 kHz or 48 kHzDynamic Range: 108 dB, INPUT to OUTPUT, Gain = -6 dB / 112 dB, DA ConverterHum and Noise Level:Equivalent Input Noise: