Shure P3T Single-Channel Half-Rack Wireless Transmitter for PSM 300 In-Ear

Dependable wireless transmission and 24-bit digital audio combine in the P3T Wireless Transmitter to deliver a superior personal monitoring mix for every performance. Send two channels of audio to a bodypack receiver up to 300 feet (90 m) away, with patented Audio Reference Companding to ensure transparent sound quality with no artifacts or dropouts. Setup is a snap with the one-touch IR sync that instantly links transmitter to receiver. Rear-panel ¼” TRS balanced inputs and loop outputs provide versatile connectivity to audio sources and other P3T units.IncludesP3T Half-Rack Single-Channel Wireless TransmitterRackmount and hardware kitsDetachable ¼-Wave AntennaBNC CableBNC Bulkhead AdapterPower SupplyUser GuideFeaturesSends a stereo or mono mix wirelessly to performers onstageDetailed, 24-bit digital audioRock-solid analog wireless connection over a 300 foot (90 meter) rangeOne-touch IR sync instantly links transmitter to bodypack receiverHigh-contrast LCD screen with audio meteringSelectable line/aux level¼" (6.3 mm) TRS balanced inputs and loop outputsDetachable ¼-wave antennaRack hardware kit includedSpecificationsRF Carrier Range: 488 – 937.5 MHz (Note: varies by region)Compatible Freqeuncies Per Band: Up to 15Tuning Bandwidth: 24 MHz maximum (Note: varies by region)Operating Range: 300ft (90m)Audio Frequency Response: 38 Hz – 15 kHzSignal-to-Noise Ratio: 90 dB (typical)Total Harmonic Distortion:80 dB (typical)Frequency Stability: +/- 2.5 ppmMPX Pilot Tone: 19 kHz (+/- 1 Hz)Modulation: FM, MPX Stereo (ref. +/- 34 kHz deviation @ 1 kHz)Operating Temperature: 0° F to 145° F (-18° C to +63° C)RF Output Power: 10, 20, 30 mW (Note: varies by region)RF Output Impedance: 50 Ohms (typical)Net Weight: 27.6oz. (783 g)Dimensions (H x W x D): 1.7" x 7.8" x 6.8" (43 x 198 x172mm)Power Requirements: 12 – 15 V DC, 260 mA maximum Shure P3T Single-Channel Half-Rack Wireless Transmitter for PSM 300 In-Ear Monitor System - H20 518-542 MHZ.