Shure ULXD4-G50 Digital Wireless Receiver, G50 Band
 |
 |
Close
Buy Shure ULXD4-G50 Digital Wireless Receiver, G50 Band
When you make a purchase through links on our site, we may earn an affiliate commission.
Shure ULX-D Wireless Microphone System G50 470-534 MHz ULXD4 ULXD4=-G50 | $1,127.00 |  | |||
Shure ULXD4-G50 Digital Wireless Receiver, G50 Band | $1,127.00 |  | |||
Shure ULXD4 Digital Wireless Receiver - G50: 470 to 534 MHz ULXD4=-G50 | $1,127.00 |  | |||
The Shure ULXD4 is a half-rack, networkable wireless receiver for use with ULX-D® Digital Wireless Systems. With an expansive set of professional features, including 24-bit / 48 kHz digital audio quality, efficient and intelligent RF performance, and AES 256-bit encryption, ULX Digital offers uncompromising wireless tailored for professional sound reinforcement.This quad channel receiver offers conveniences such as RF cascade, internal power supply, bodypack frequency diversity, audio output channel summing, and Dante™ digital networking for multi-channel audio over Ethernet. Take advantage of High-Density mode for applications where high channel counts are needed, greatly increasing the amount of simultaneous channels possible over one frequency band.Note: When purchasing separate wireless components, please match their frequency bands to ensure proper system operation.IncludesULXD4 Receiver, G50 BandPower Supply(2) 1/2-Wave Receiver Antennas(2) 22 in. BNC-BNC Coaxial Cable(2) Bulkhead AdaptersRack-mounting hardware kitEthernet Cable, 3'(2) AA alkaline batteriesFeaturesOperates in the G50 Band (470-532MHz)Predictive switching diversityEthernet networking provides streamlined setupFront-panel gain adjustments provide up to 60dB additional gainSupport for frequency coordination with the Axient Spectrum ManagerSpecificationsRF Input:Spurious Rejection: >80 dB, typicalConnector Type: BNCImpedance: 50 ΩBias Voltage: 12–13 V DC, 170 mA maximum, per antennaAudio Output:Gain Adjustment Range: -18 to +42 dB in 1 dB steps (plus Mute setting)Configuration:1/4" (6.35mm): Impedance balanced (Tip=audio, Ring=no audio, Sleeve=ground)XLR: Balanced (1=ground, 2=audio +, 3= audio -)Impedance:1/4" (6.35mm): 100 Ω (50 Ω Unbalanced)XLR: 100 OhmsFull Scale Output:1/4" (6.35mm): +12 dBVXLR: LINE setting= +18 dBV, MIC setting= -12 dBVMic / Line Switch: 30 dB padPhantom Power Protection on both 1/4" (6.35 mm) and XLRNetworking:Power Over Ethernet (PoE): No, protectedNetwork Interface: Single Port Ethernet 10 / 100 MbpsNetwork Addressing Capability: DHCP or Manual IP addressMaximum Cable Length: 328ft (100m)Additional Specs:Audio Frequency Response: 20 Hz – 20 kHz, flatDynamic Range: 120 dB, extendedTuning Range: Up to 64 MHzDimensions (H x W x D): 7.75" x 6.75" x 1.65" (197 x 171 x 42mm)Weight: 2.0 lbs. (913 g), without antennasHousing: Galvanized steel Shure ULXD4-G50 Digital Wireless Receiver, G50 Band.
Product description is based on database from online stores. Be sure to verify all information directly with seller before purchasing.
All about USB-C interfaceExploring the possibilities of USB-C: from universal charging and high-speed data transfer to image streaming
Which Marshall headphones should you choose? Guide to the series Major, Minor, Mode, etc.We understand all the features of the Marshall headphone range
How to place an order?How to add store?
Remember that online store is responsible for accuracy of information about price, warranty and delivery!
We recommendCompare using chart →
studio, dynamic, unidirectional, DN: cardioid, 30 – 18000 Hz, 150 Ohm, -52 dB, connection: XLR, attenuator
instrumental, condenser, unidirectional, DN: cardioid, 20 – 20000 Hz, 200 Ohm, -37 dB, connection: XLR, attenuator
studio, condenser, unidirectional, bidirectional, omnidirectional, DN: cardioid, 20 – 20000 Hz, 200 Ohm, -31 dB, connection: XLR, Roll-off, attenuator
vocal, dynamic, unidirectional, DN: cardioid, 50 – 15000 Hz, 150 Ohm, -55 dB, connection: XLR
wireless systems (transmitter + receiver), head, electret, unidirectional, DN: cardioid, 45 – 20000 Hz, 600 Ohm, -50 dB, connection: XLR, Jack, gooseneck
instrumental, condenser, unidirectional, DN: supercardioid, 40 – 20000 Hz, 150 Ohm, -32 dB, connection: XLR, Roll-off, attenuator
studio, condenser, unidirectional, DN: cardioid, 20 – 20000 Hz, 100 Ohm, -37 dB, connection: XLR
instrumental, stereo, in box 2, condenser, unidirectional, DN: cardioid, 20 – 20000 Hz, 100 Ohm, -38 dB, connection: XLR
vocal, dynamic, unidirectional, DN: cardioid, 50 – 15000 Hz, -54 dB, connection: XLR, USB A (for PCs and laptops)
for camcorder, condenser, unidirectional, DN: supercardioid, 40 – 20000 Hz, -34 dB, connection: mini-Jack
computer, for streaming and broadcasting, electret, unidirectional, DN: cardioid, 20 – 20000 Hz, -40 dB, connection: USB A (for PCs and laptops)
wireless systems (transmitter + receiver), vocal, dynamic, unidirectional, DN: cardioid, 60 – 15000 Hz, -53 dB, connection: XLR, Jack, attenuator
