USA
Catalog   /   Small Appliances   /   Kitchen   /   Juicers

Comparison Bosch MESM731M vs Kenwood PureJuice Pro JMP 800

Add to comparison
Bosch MESM731M
Kenwood PureJuice Pro JMP 800
Bosch MESM731MKenwood PureJuice Pro JMP 800
Compare prices 1
from $289.92 up to $399.96
Outdated Product
TOP sellers
Main
High pressing efficiency. Adjusting the amount of pulp. Reverse function. Nozzle for making sorbet. Recipe book included. Reliability and unpretentiousness in operation.
Two loading holes. Capacious tanks for juice and cake.
Typeaugerauger
Juice container1 L1.5 L
Pulp container1.3 L1.5 L
Specs
Power150 W240 W
Juice containerfreestandingfreestanding
Controlcontrol knobcontrol knob
Number of speeds1
Max. revolutions55 rpm48 rpm
Reverse
Functions
automatic release of pulp
drop-stop system
overheat protection
protection from accidental activation
automatic release of pulp
drop-stop system
overheat protection
protection from accidental activation
General
Body materialplasticplastic
Sorbet nozzle
Round neck
Dimensions (HxWxD)45x20x16 cm
Weight7.1 kg
Added to E-Catalogseptember 2017december 2016

Juice container

The volume of the built-in or freestanding juice tank (see Juice capacity). It is usually in the range from 0.2 to 2 liters. Doing more volumes, usually, does not make sense — freshly squeezed juice is considered the most useful, and it quickly loses its properties. Therefore, the best option is to prepare small portions of juice up to 1 liter, with the expectation that you can drink it right away. On the other hand, for the preparation of canned juices, a tank volume of 1.5 – 2 liters is usually quite enough.

Pulp container

The volume of the tank for the oil cake (pressed pulp) installed in the juicer.

While most models with a pulp tank come equipped with an automatic pulp ejection function (see "Functions"), there are some exceptions. Nevertheless, the size of the tank directly affects the duration for which the juicer can be used without having to empty the oil cake residue. However, an increase in capacity significantly impacts the device's dimensions, weight, and cost.

Modern juicers are designed with oil cake containers ranging from 200-500 mL in the most compact models to 3 liters or more in larger ones. The specific capacity is usually chosen by designers based on the unit's total power and performance. However, models with similar performance characteristics may differ in their oil cake container volume. When selecting a juicer, it's important to consider the intended use of the device. For occasional home use, a smaller container may suffice, but for a cafe or bar where freshly squeezed juices are prepared regularly, a larger capacity juicer may be the better option.

Power

The power of the juicer depends on its type. For example, the power of citrus juicers rarely exceeds 40 W, since the structure of citrus fruits is easily destroyed and does not require serious effort to extract juice. The power of centrifugal juicers can even exceed 1000 W. The centrifugal speed and spin features depend on the power of the centrifugal juicer (for more details, see Number of speeds)

Number of speeds

The number of speeds of the juicer. The optimal working speeds for different fruits are different: for example, soft fruits and vegetables need to be pressed at low speeds, solid ones (for example, carrots) — at maximum. In addition, the amount of pulp in the juice depends on the extraction speed: at high speeds it is more, at low speeds the juice is light.

The number of speeds provided by the design of the juicer can vary from 1 to 9. The more speeds, the easier it is to choose the optimal mode for each specific case.

Max. revolutions

The maximum rotation speed of the working tool is centrifuges in juicers, conical nozzles in citrus juicers. The higher the maximum speed, the more solid products can be processed in the device (this applies primarily to centrifugal juicers). At the same time, for soft products, a high rotation speed is not always suitable, as it leads to the ingress of an excessive amount of pulp into the juice. The perfect option is to have a speed control in the juicer (see Number of speeds).

Sorbet nozzle

A supplementary attachment specifically created for producing sorbet, which is a cold treat made from ice or frozen fruit and berry puree. It's important not to mistake sorbet for sherbet, which is a type of frozen dessert.

Nowadays, sorbet nozzles are mainly found in auger juicers (see "Type"), and are designed to grind frozen fruits and berries into a puree. Unlike traditional juicing, the pulp (cake) is not separated from the juice, resulting in almost the same amount of product output as input, but with a different consistency.

Round neck

The round shape of the neck for loading products allows you to load small fruits into the device without cutting them. Round neck juicers have appeared recently; before that, necks were usually made oval, and products for processing most often had to be cut.
Bosch MESM731M often compared
Kenwood PureJuice Pro JMP 800 often compared