Comparison Makita DCL182Z vs Makita DCL180Z

The type of dust collector provided in the design of the vacuum cleaner.

Nowadays, there are three main types of dust collectors — a regular bag, a cyclone system and an aquafilter. Also, in some vacuum cleaners (in particular, industrial and fireplace models — see "Product type") dust collectors in the form of rigid containers (tanks) can be used without additional equipment. For such models, the type of dust collector in our catalogue is not specified. As for the three main types, here are their features:

— Bag. A dust collector in the form of a soft bag, simultaneously plays the role of one of the filters: air passes through the walls of the bag, and most of the contaminants are retained. Such containers are simple and inexpensive, while they can be made quite roomy. In addition, the vacuum cleaner with a bag remains operational in any position of the body. On the other hand, as the bag fills up, suction efficiency drops noticeably; and the cleaning procedure is usually quite troublesome — in particular, a lot of dust is raised into the air. Disposable bags, which are available for many models as an additional accessory, are deprived of such a drawback. However, on the other hand, the purchase of such bags is associated with additional expenses. As a result, this type of dust collector, although very popular in modern vacuum cleaners, is much less common...than the "cyclones" described below.

— Cyclone system (bagless). Dust collector based on a cyclone type air cleaner; usually has the form of a plastic bowl of a special shape. The principle of operation of such systems is that the air flow entering the dust collector is twisted into a spiral. In this case, the centrifugal force throws debris and dust out of the formed vortex, and the collected pollution sinks to the bottom of the dust collector. One of the main advantages of "cyclones" is the ease of cleaning: just turn the container over and the contents pour out of it without additional effort, and if desired, the dust collector can be easily washed. In addition, the suction force is practically independent of the degree of filling of the bowl. However, cyclones are somewhat inferior in capacity to bags, but because of the foregoing, this point is usually not fundamental. But the unequivocal disadvantages of this option are the higher cost of the same bags; a lower suction force for the same engine power; as well as a somewhat lower efficiency of catching fine dust. In light of the latter, "cyclones" have to be equipped with additional filters, which also periodically require cleaning. It is also worth bearing in mind that such systems are most effective with a regular, strictly defined position in space. If you deviate from this standard operational position, the efficiency of the dust collector may noticeably decrease, which leads to rapid clogging of the filters.

— Aquafilter. This type of dust collector looks like a container with water: the air drawn in by the vacuum cleaner passes through the liquid, which traps most of the contaminants. Such systems are highly efficient and hygienic: they capture various contaminants well, including even fine dust, without additional filters. In addition, the air released by the vacuum cleaner is additionally humidified which is especially useful in the cold season, when heating dries the air in the room. At the same time, the procedure for cleaning the dust collector itself is very simple and convenient: after cleaning, its contents can simply be poured into the sewer, while no dust rises into the air (unlike the process of cleaning cyclones and especially bags). On the other hand, it is desirable to wash and dry aquafilters after each use, which somewhat complicates maintenance. In addition, most of these vacuum cleaners are quite expensive, the passage of air through the water creates additional noise, and the water itself significantly increases the weight of the unit.
Separately, it is worth emphasizing that the presence of an aquafilter does not mean that the vacuum cleaner is washing (see above) or at least can wet cleaning (see "Cleaning type"). Quite a few models with an aquafilter work only in a dry format — and vice versa, units with a wet cleaning function may well be equipped with other types of dust collectors.

— Aquafilter + bag. This option means that the vacuum cleaner is equipped with two types of dust collectors at once — an aquafilter and a traditional bag. The features of both are described in detail above. Here we note that such models necessarily have a wet cleaning mode (see above) and/or a water suction function — an aquafilter is used for these purposes. But the bag, anyway, is intended for traditional dry cleaning. In general, this is the most common combination of the two types of dust collectors. The other variants described below are much less common.

— Aquafilter + cyclone. A combination similar to the aquafilter with a bag described above. The delivery set of such a vacuum cleaner includes two types of containers: an aquafilter for wet cleaning and/or water suction (this function can also be provided in vacuum cleaners with purely dry cleaning), as well as a cyclone system (see above) for sry cleaning .

— Cyclone system + bag. A combination found exclusively in dry cleaning models. Similar to the combinations described above, most often we are talking about the presence of two replaceable dust collectors of different types in the kit. The specific type is chosen depending on the situation. So, the cyclone system is convenient for collecting relatively large and heavy contaminants, and the bag handles better with fine dust.

The nominal volume of the dust collector installed in the vacuum cleaner.

This indicator largely depends on the type of unit (see above). For example, in most handheld household models, the capacity does not exceed 0.5 L. The volume of the container in upright vacuum cleaners and robots can be somewhat larger — among the first variety there are quite a few models for 1 – 2 liters or even more, and among the second — by 0.6 – 1 liter and a little more. For conventional vacuum cleaners, the minimum figure is actually about 0.8 – 1 L; dust collectors for 1 – 2 L and 2 – 4 L are very popular in such devices; the maximum capacity is actually 4 – 6 liters — units of a similar layout, but with a larger capacity, are usually referred to as household ones. In turn, relatively small containers are occasionally found among workshop models. However, in vacuum cleaners of this type, the capacity is generally quite large — it can reach 26 – 50 liters or even more ; the same applies to industrial (construction) units.

In general, a larger dust container allows you to work longer without interruptions. On the other hand, a capacious container itself takes up more space and, accordingly, affects the size, weight and price. So when choosing th...is parameter, it is worth considering the actual features of the use of a vacuum cleaner. Here we can give such an example: for a full-scale cleaning of an average city apartment, a capacity of about 1 – 1.5 litres is required. Thus, say, a 4-litre bag allows you to carry out two such cleanings with sufficient efficiency without unloading the vacuum cleaner. There are more detailed recommendations regarding the optimal volume of the dust collector, including specific cleaning options. These recommendations can be found in special sources.

Battery models compatible with the vacuum cleaner. This information will be useful in cases where the batteries must be purchased separately, for example, if the tool does not come with a battery in the kit, if you need to supplement the original kit, or if the existing battery has failed.

The operating time of a battery-powered vacuum cleaner (see "Power supply") on a single battery charge.

Usually, the average operating time in normal mode is indicated here. Accordingly, in fact, the battery life of the vacuum cleaner may differ slightly from the claimed one, depending on the chosen application format. Nevertheless, the operating time indicated in the specifications is a fairly reliable indicator; it can be used both for a general assessment of battery life and for comparing the selected vacuum cleaner with other models.

Separately, we note that increasing battery life requires either the use of more capacious (and therefore more expensive and heavier) batteries or a decrease in engine power (and the efficiency of the unit as a whole). So it is worth looking specifically for a long working vacuum cleaner if these moments are outweighed by a long operating time.

The time required to charge the cordless vacuum cleaner fully (see "Power supply").

Larger batteries tend to take longer to charge. On the other hand, modern batteries can use various solutions that speed up the process, so there is no strict dependence here.

Separately, we note that the speed of charging batteries is usually uneven: at first, the process is fast, then it gradually slows down. So if, for example, the specifications indicate a charging time of 2 hours, then charging from 0 to 50% will take a little less than an hour, and from 50% to 100% the remaining time.

The presence of an indicator in the vacuum cleaner that displays the current battery charge level. The design and functionality of such an indicator may be different. Often the simplest LED indicators are used, allowing only an approximate estimate of the remaining energy. Also, note that the charge level indicator may not be placed on the body of the vacuum cleaner but on the battery itself. Nevertheless, this feature anyway provides additional convenience, makes it easier to monitor the state of the battery and reduces the risk of being left with a dead battery at the wrong time.