USA
Catalog   /   Home & Renovation   /   Bathroom & Taps   /   Kitchen Sinks & Accessories   /   Kitchen Sinks

Comparison Kraus KWU1111-23-PGM 584x483 vs Kraus KWU111-23 584x482

Add to comparison
Kraus KWU1111-23-PGM 584x483
Kraus KWU111-23 584x482
Kraus KWU1111-23-PGM 584x483Kraus KWU111-23 584x482
Outdated Product
from $339.95 
Outdated Product
TOP sellers
Main
The durable DuraShield™ PVD coating provides abrasion and corrosion resistance and has a sandblasted matte texture that resists water and finger marks. The sink has noise- and vibration-absorbing rubber pads.
The sink has noise and vibration-absorbing rubber pads. A protective coating on the outside of the sink prevents condensation from forming.
Mount type
tabletop
tabletop
Materialstainless steelstainless steel
Material thickness1.5 mm
Shaperectangularrectangular
Working surface
In box
 
cutting board
bowl mesh
wash colander
cutting board
bowl mesh
General
Surface type
matte
matte
Minimum cabinet width (base)700 mm650 mm
Working surface size584x483 mm584x482 mm
Mortise hole size (countertop)534x432 mm533х431 mm
Main bowl size (LxWxD)534х432х254 mm533х406х254 mm
Country of originUSAUSA
Manufacturer's warranty7 years
Color
Added to E-Catalogseptember 2023may 2020

Material thickness

The thickness of the material used for washing.

More "thick" models, on the one hand, provide strength and reliability, on the other hand, they differ significantly in weight and cost of the product. And accordingly, for each material, its own standards in thickness are applied.

So for steel, the values start from 0.6 mm, and in the most "heavy" models, this indicator reaches a thickness of 1.5 mm. The most common value (golden mean) is a thickness of 0.8 mm, there are also thicknesses of 1 mm and kitchen sinks of 1.2 mm

In box

Tap. The presence of a tap in the kit will eliminate the search for a suitable style. On the one hand, a tap in a set simplifies the purchase of a sink, but on the other hand, it often introduces certain restrictions. Thus, taps come in different designs and capabilities, as a result of which a complete solution may not satisfy user needs. We also note that this paragraph indicates only those taps that are officially presented in the portfolio of a particular manufacturer of kitchen sinks. Such sets can be assembled within one line or without being tied to a specific series, but purely according to style.

Colander. The colander supplied with the sink is usually a mesh or hole bottom tray through which water can freely pass. Such a tray can be used in the same way as a common colander - for washing cereals and ready-made pasta, for washing and drying fruit, vegetables and greenery, etc.

Cutting board. Availability of cutting board in the product delivery kit. Such a board, when used, is usually attached directly to the sink; this may be especially relevant in cramped conditions where there is not much space on the kitchen table.

Automatic valve. Device that facilitates filling the sink with water and draining this water. It consists of the valve itself, which closes the drain opening, and an exit button or lever..., which is installed in a convenient place - for example, near the mixer. To drain water, it is enough to press a button or lever, opening the valve - it is much more convenient and comfortable than to lower your hand in the water and reach the drain hole.

Mesh on bowl. Mesh made of durable wire mounted over the bowl; can be made removable or foldable. This device is mainly used as a dishwasher; it can be especially useful if the kitchen does not have space for a separate dryer, or if you periodically have to deal with a large number of dishes for which a separate dryer is no longer enough.

Detergent dispenser. Availability of a dispenser for liquid detergents. This device looks like a container with a characteristic cap and a long spout: when you press the cap, a portion of the contents is delivered through this spout. The size of each portion is very small - by pressing the required number of times, you can quite accurately dose the amount of detergent. Dispensers of this design save space in the kitchen, since most of their body is located under the sink. This affects not only the ease of use of detergents, but also the aesthetic design of the kitchen interior.

Siphon. The presence of a siphon supply kit is a characteristic curved tube for connecting a sink drain to a sewer. The complete siphon is by definition optimally compatible with the «native» wash; it saves you the hassle of searching and selecting.

Minimum cabinet width (base)

The smallest width of the cabinet, pedestal or other base required for the installation of the sink. By width in this case means the distance between the side walls of the cabinet (base). If the width of the sink is too small, it will not get the necessary support, and its normal use will be impossible.
Main minimum dimensions: >less than 45 cm, 45 cm, 50 cm, 60 cm, 80 cm, more than 80 cm.

Manufacturer's warranty

The warranty period declared by the manufacturer for this model is the period during which the manufacturer guarantees normal operation. The specific terms of the warranty may vary, however, as a rule, it covers factory defects and malfunctions caused by the fault of the manufacturer/seller and discovered during normal use, without violating the rules.

The longer the warranty period (mostly there are models with a guarantee for 5 years, 10 years, 15 years or even with a lifetime warranty) - the more reliable the sink is, the higher its overall quality, all other things being equal, but the more expensive it will cost in comparison with analogues.

However, depending on the market (country in which it is sold), the warranty for the model may differ. For example, for the countries of the European Union, America and other advanced states, the guarantee can be increased.