Comparison Xiaomi 65W GaN 1A1C vs Samsung EP-T6530

Among modern household chargers (for home and office) there are both classic network models and wireless devices (in the form factor of stands or pads), as well as docking stations for Android and Apple. Devices for cars, in turn, are divided into traditional wired car chargers(including cigarette lighter splitters — see “Cigarette Lighter Splitter” for them) and wireless. Here is a more detailed description of these options:

— Network charger. Classic wired chargers plugged into sockets. Somewhat less convenient and functional than docking stations, but much more compact and for the most part quite suitable for travel, since they take up minimal space in luggage. And compared to wireless chargers, wired models are noticeably cheaper, compatible with more devices, and often also work much faster. In addition, it is easier to implement special powerful fast charging technologies in such devices. And in conjunction with the new GaN production technology, they can also be reduced in size.

— GaN chargers. Chargers with GaN circuitry that can hold "multiple charges" in one compact housing. Instead of traditional silicon, their semiconductors use gallium nitride with increased voltage conductivity. GaN chargers “refuel” gadgets at an acce...lerated pace through all available ports. Another significant advantage over traditional chargers is the reduction in the size of the charging unit without loss of power.

— Car charger. Devices designed for wired charging of gadgets from car on-board network. Usually, they use a standard cigarette lighter socket and are designed for cars and other similar equipment with 12 V networks, however, there are also models that are compatible with 24-volt networks of heavy trucks, buses, etc.; these nuances should be clarified separately.

— Wireless charger. Devices for charging gadgets wirelessly — usually, using Qi technology. Of course, the charger itself must be connected to the outlet using a cable, but the energy is transferred to the device being charged without any plugs and cables. The effective range of such a transmission is small, so this type of charger is traditionally made in the form of platforms or stands, where you need to directly place the charged gadgets. However, the wireless way of working is as user-friendly as possible, besides, it does not wear out the connectors; and some compact gadgets (for example, smartwatches) generally charge only in this way. The main disadvantages of this format are the high cost of chargers and limited compatibility (a relatively small number of gadgets, mostly quite expensive ones, support wireless charging). In addition, wireless chargers are less efficient than wired chargers, which increases procedure time and device power consumption. Thus, some models are equipped with ports for wired charging.
As for the differences between platforms and stands, the first form factor is more versatile and, together with the device being charged, takes up less space — the gadget lies flat on the platform. A platform is a good option for a portable device. The stand, in turn, assumes an inclined, almost vertical arrangement of the gadget — this allows you to see the display even while charging. On the other hand, such charger devices are more bulky than platforms and are more likely to be designed for stationary use.

— Wireless car charger. A rather specific variety: wireless charging devices powered by the vehicle's on-board network. Most often they are designed for a standard cigarette lighter plug with a voltage of 12 V, although it is technically quite possible to provide compatibility with 24-volt networks of trucks, buses and other heavy vehicles. The features of wireless charging are described in detail above, but here we note that driving in a car is associated with various shocks and tremors; therefore, such devices are made in the form of holders, and not stands/platforms. Such a holder may provide fastening on the dashboard and the ability to use the phone directly in the charging process (for example, as a navigator).

— Only for smartwatches. Chargers designed to be used exclusively with smartwatches and other wearable gadgets (such as fitness trackers). To be more precise, we are talking about gadgets that support an exclusively wireless format of work. Accordingly, the capabilities of a charger from this category are limited to the smartwatch charging area (usually only one), and there are no wired charging connectors in the design. Also note that chargers of this type are most often produced for a specific model or line of wearable gadgets, and compatibility with third-party devices in such cases is not guaranteed.

— Android dock stations. Docking stations designed to charge gadgets running Android OS. The docking station itself can be described as a stand with a wired charging feature. The gadget with such a design is installed vertically or almost vertically, with the plug down; and on the stand itself there is a power plug, which not only charges the installed device, but also plays the role of a latch. This plug can be in microUSB or USB-C format — both of these connectors are used in modern Android gadgets. It is also worth noting that some "docks" from this category have a narrow specialization and are made for specific device models (or devices from one manufacturer). However, there are also universal solutions where compatibility is limited by the type of connector and the screen size (moreover, the diagonal limitation can be quite solid — for example, up to 10.1").
In general, the docks are designed for permanent installation in one place. They are noticeably inferior to classic chargers in terms of ease of transportation, but they simplify the storage of gadgets and can be useful in some cases of their practical use — for example, when watching a movie from a tablet.

— Apple Lightning Dock. Docking stations designed for charging Apple gadgets and equipped with a Lightning connector (used in Apple portable technology since 2012). For more information about docking stations in general, see above, all this is true in this case too — with the adjustment for the fact that in the case of Apple technology, dock compatibility is usually limited only to the size of the device.

The number of USB-C connectors provided in the design of the charger.

USB-C is a relatively new type of connector; it has dimensions slightly larger than microUSB and a double-sided design that allows you to insert the plug in either direction. At the same time, despite their compact size, rather advanced features can be implemented in such charging ports — in particular, high power supply and many fast charging technologies. On the other hand, specifically in chargers for gadgets, connectors of this type are much less common than full-sized USB (USB A), and in smaller quantities — one at a time, less often two. This is due to the fact that a cable is usually used to connect rechargeable gadgets, with detachable cables it is more convenient to use ordinary USB ports, and installing such ports in a charger (even a compact one) is easy. So in fact, it makes sense to specifically look for a device with USB-C mainly if the you have such a cable already (or a gadget with a suitable plug).

The maximum current that the device is capable of delivering to the charging output. This is one of the key parameters for any charger, it directly determines its power and, accordingly, its efficiency with certain batteries. These points are described in detail in the “Power” paragraph below, but here we note that if several values are indicated in this paragraph, it means that the design provides for several connectors with different current specs (or several groups of connectors, each with its own amount of amperes per port) .

As for specific numbers, when charging from USB (used in most modern chargers), the maximum current up to 1 A is considered very limited, 1.5 A is low, 2 A, 2.1 A and 2.4 A are average values, and in the most powerful chargers, this figure can be 3 A, 3.4 A and even 5 A.

The total power provided by the device while simultaneously charging the maximum possible number of gadgets. This parameter is indicated only for models that can work with several gadgets; for a 1-socket charger or a wireless platform, the operating power is given in the “Power per 1 device” paragraph.

When evaluating this parameter, two points should be taken into account. First, when the charger is fully loaded, the power of each individual port and/or wireless platform may be lower than the maximum possible value. For example, some models with 2 USB ports for 2 A and 1 A (10 W and 5 W), with simultaneous operation of both ports, can output only 5 W each, that is, only 10 W in total (this is the number and indicated in this paragraph). Secondly, the distribution of power over individual connectors can be different — depending on the current on each port and supported fast charging technologies; these nuances are best specified in the official documentation.

Fast charging technology supported by the device.

By itself, fast charging, as the name suggests, reduces the charging time compared to the standard procedure. For this, increased voltage and/or current power is used, as well as a special smart process control. But the possibilities and features of such charging may be different, depending on the specific technology used in the device. The same technology must be supported by the charger too — this is the only way to 100% guarantee correct operation. However some types of fast charging are mutually compatible — this point should be clarified separately, and compatibility is not always full.

Nowadays, the following technologies are most widely used: Quick Charge of different versions (3.0, 4.0, 5.0), Power Delivery (version 3.0 and 3.1), Pump Express, Samsung Adaptive Fast Charging, Huawei Fast Charge Protocol, Huawei SuperCharge Protocol, OPPO VOOC, OnePlus Dash Charge. Here is a brief description of each of them:

— Quick Charge (1.0, 2.0, 3.0, 4.0, 5.0). Technology created by Qualcomm and used in gadgets with Qua...lcomm CPUs. The later the version, the more perfect the technology: for example, Quick Charge 2.0 has 3 fixed voltage options, and version 3.0 has a smooth adjustment in the range from 3.6 to 20 V. Most often, gadgets with a newer version of Quick Charge are compatible with more old charging devices, but for full use, an exact match in versions is desirable.
Also note that certain versions of Quick Charge have become the basis for some other technologies. However, the mutual compatibility of chargers and gadgets with support for these technologies needs to be clarified separately.

— Pump Express. Own development of MediaTek, used in portable devices with CPUs of this brand. Also available in several versions, with improvements and additions as it develops.

— Power delivery. Native fast charging technology for the USB-C connector. Used by many brands, found mainly in chargers and gadgets equipped with this type of connector. Presented in several versions.

— Samsung Adaptive Fast Charging. Samsung's proprietary fast charging technology. It has been used without any changes since 2015, so it looks rather modest compared to newer standards. Nevertheless, it is able to provide good speed, especially in the first 50% of the charge.

— Huawei FastCharge Protocol. One of Huawei's proprietary technologies. Formally similar to Quick Charge 2.0, but used with both Qualcomm and other brands of mobile CPUs, so compatibility is not guaranteed. In general, it is considered obsolete, gradually being replaced by more advanced standards like the SuperCharge Protocol.

— Huawei SuperCharge Protocol. Another proprietary technology from Huawei introduced in 2016; for 2021 is available in several versions. In some devices, the power of such charging exceeds 60 V — not a record, but a very solid indicator.

— Oppo VOOC. OPPO technology, used both in branded smartphones and in products from other brands. Available in several versions; The latest (for 2021) version of SuperVOOC is for 2-cell batteries and is sometimes listed as a separate technology called Oppo SuperVOOC Flash Charge.

— OnePlus Dash Charge. A relatively old proprietary standard from OnePlus. An interesting feature is that in some gadgets, the effectiveness of Dash Charge is practically independent of the use of the screen: when the display is on, the battery charges at almost the same rate as when it is off. Technically a licensed version of OPPO's VOOC, however, these technologies are not compatible. Since 2018, Dash Charge has been phased out by Warp Charge, but this newer technology is rarely used in separately sold chargers.

In addition, on the market you can find chargers that support rarer and more specific formats of work; the features of these formats can be clarified by special sources.

The presence of a cable in the delivery kit of the charger, or any other specific type of included cable.

The presence of a cable is indicated mainly for wireless devices (see “Type”) — in such cases, we are talking about the power cable of the charger itself. For wired models, the type of connectors on the stock wire (s) for charging gadgets is usually specified. At the same time, the USB port is used by default to connect to the charger itself, so this plug may not be mentioned in the description of the wire. On the other hand, there may be such connectors:

— USB-C. A miniature version of the USB connector, gradually replacing microUSB in modern portable devices. It has a convenient reversible plug design, and can also provide some advanced power options not available with microUSB. Also note that USB-C can be used in a cable not only to connect to a gadget, but also to connect to the charger itself (along with traditional USB); so on the market you can find corresponding cables like "USB-C — microUSB", "USB-C — Lightning", etc.

— microUSB. Universal connector, extremely popular in portable gadgets of various types; only relatively recently has it begun to give way to the more advanced USB-C (which differs from it in its one-sided design and lower power supply).

— Lightning. Universal connector, used e...xclusively in portable Apple devices. Like USB-C, it has a two-way layout, but a slightly different design.

The length of the cable supplied with or included with the charger. For wireless models, the length of the power cable of the charger itself is indicated here, for wired models, the length of the cord for charging gadgets

Anyway, a longer cable gives more freedom of movement, but it creates inconvenience for short distances. Also note that charging is supposed to be used in the immediate vicinity of sockets, so wires longer than 2 m are practically not found among such devices. A length of more than 1.5 m is considered significant, from 1 to 1.5 m — medium, from 0.5 to 1 m — small, and in some models there are wires shorter than 0.5 m.