Comparison Samsung WW60K42106W white vs LG FH0B8ND6 white

Maximum drum rotation speed in spin mode. The higher it is, the more intense the spin. However, note that not all types of fabric normally tolerate high speeds — a speed of 1000 rpm or more should be used only for especially durable fabrics, and delicate ones need to be wrung out at low speeds, so the best choice is a machine that allows you to choose the spin speed.

The maximum spin speed ( 1200 rpm, 1400 rpm), in particular, determines its efficiency (see Spin class), but this parameter is not decisive — the duration of the spin cycle and the diameter of the drum also play an important role. Therefore, for machines with the same spin speed, their efficiency class may differ.

The volume of water used by the washing machine during a standard wash cycle. It is measured while washing the maximum amount of cotton underwear for this model with a normal programme and a temperature of 60 degrees.

When evaluating efficiency, one should consider not only the actual water consumption but also the maximum load. So, for example, a model with a load of 7 kg and a consumption of 49 litres per kilogram of laundry will be more economical than a model of 5 kg with a consumption of 40 litres: the first consumes 49/7 = 7 litres per 1 kg of laundry, the second 40/5 = 8 litres per kilogram. This moment is important, first of all, if a large amount of washing is expected.

Many modern automatic washing machines are equipped with intelligent systems that can adjust the water consumption to the actual load and avoid overspending.

In machines with direct drive, the rotation from the engine is not transmitted through a belt drive, but the drum is located directly on the motor shaft. Such a design produces less noise and vibration. In addition, it is considered more reliable — manufacturers give a guarantee of up to 10 years for the drum and engine of such machines.

When selecting a washing machine based on the number of programs, it's important to keep in mind that having 12 to 16 modes is typically sufficient. More programs, such as 25 or more, may simply offer variations of the same standard programs with different settings for duration, temperature, spin speed, etc. This may not necessarily provide a wider variety of programs. Additionally, machines with the same number of modes may have different specific sets of programs. While more modes increase the possibilities for selecting an optimal mode, it also significantly increases the cost.

Machines with this technology create small air bubbles in the drum during washing. According to the manufacturers, this significantly increases the efficiency of washing, including old dirt, and at the same time reduces friction both between laundry and between laundry and the drum, which ensures better preservation of delicate fabrics. In some models of machines, during an air-bubble wash, the drum may not rotate at all. Technically, in machines with this function, it is possible to wash without the use of powder at all. However, the effectiveness of such washing, of course, will be lower. Note that soft water is needed for air-bubble washing — bubbles form difficult in hard water, and the effect drops.

Power surge protection automatically turns off the washing machine in case of power surges. It protects the device's electronic circuits from hazardous loads and prolongs their service life. In this case, the programme running at the time of shutdown is remembered. And when the power is restored washing cycle continues from the point at which it stopped.

An automatic safety system that controls the integrity of the system for supplying and draining water to the washing machine and stops the water supply in the event of a leak. The protection can be installed on the hoses, on the body, or both (full protection).

Leak-proof hoses are equipped with special sensors and solenoid valves at both ends that shut off the water supply in the event of a breach in the hose. They can be used for both sampling and draining water. It is worth noting that for most washing machines, leak-proof hoses can be purchased separately, even if they are not included in the original package.

Protection of the body of the washing machine is carried out using sensors installed on the bottom of the device isolated from water. When water enters the bottom, its supply to the machine is turned off. The presence of leak protection allows you to avoid troubles like a short circuit or a flood in the house. However, leak-proof machines are more expensive than conventional machines, all other things being equal.

The type of controls provided in the washing machine.

— Rotary knobs. Operation through one or more rotary knobs only, without buttons or other additional elements. This option is found exclusively in semi-automatic (activator) washing machines with minimal functionality. In the simplest of these models, there is only one knob (it sets the duration of the wash) in more advanced ones — two or three (wash timer, spin timer, programme selection). At the same time, the timer knob simultaneously works as a switch, turning on the unit when turning.

— Rotary knob + buttons. Type of control used in most automatic washing machines. The main rotary knob in such models is responsible for selecting the programme. It can be supplemented by auxiliary knobs for setting individual parameters: for example, water temperature and spin speed. And other parameters and additional functions are controlled by buttons. Such controls are quite functional and inexpensive, which led to their popularity.

— Rotary knob + touch controls. Controls, providing a combination of a rotary knob with touch controls. The first is responsible for choosing the main programme; the second is for additional functions and parameters. Such control is somewhat more expensive than the "rotary knob + buttons" combination (see above), but this moment is not fundamental. At the same time, the touch panel gives the device a sty...lish and technological appearance, and on the practical side, it is more convenient for some users since it does not require effort to press. In addition, it is much easier to clean the touch controls from dirt than the buttons.

— Touch controls. Control, carried out only through the touch panel, is much more expensive than the “rotary knob + touch controls” combination and therefore is used mainly in advanced level machines. Units with such controls do not have unnecessary protruding parts on the front panel, which provides not only a neat and pleasant appearance but also ease of cleaning from dirt. And in some models, the touch panel can be placed on the lid of the drum, which allows you to increase its diameter and capacity without increasing the height of the machine itself. At the same time, in some cases (for example, when choosing a programme), the touch controls are less visual and intuitive than the rotary knob, so this option is used relatively rarely.

— Buttons. Button-only controls are fully functional but generally less user-friendly and visual than a combination of buttons with a rotary knob. Therefore, this option is not popular in modern washing machines.

The maximum noise level produced by the machine during operation. Most often indicated for spinning — this is the noisiest mode of operation; for units without spinning (such as semiautomatic devices), this paragraph indicates the overall volume or the volume in the noisiest mode.

The quieter the machine works, the more comfortable it is for others. This moment is especially critical if there are small children in the house. However, the decibel used to measure loudness is a non-linear unit, and the actual noise level is best estimated from comparative tables in special sources.