USA
Catalog   /   Large Appliances   /   Washing Machines

Comparison Atlant CMA 70Y1010 white vs Atlant CMA 70C1010

Add to comparison
Atlant CMA 70Y1010 white
Atlant CMA 70C1010
Atlant CMA 70Y1010 whiteAtlant CMA 70C1010
from $253.00 up to $279.61
Outdated Product
from $260.00 up to $307.72
Outdated Product
TOP sellers
Specs
Loading typefront loadfront load
Capacity7 kg7 kg
Max. spin speed1000 rpm1000 rpm
Water consumption per cycle50 L53 L
Dryer
Tank materialplasticplastic
Heating element materialstainless steelstainless steel
Features
Number of programmes1616
Additional programmes
quick wash
quick wash
Safety features
Surge protection
Leak protection
Anti-foam control
Unbalance control
Child lock
Efficiency classes
Spin classCC
Energy classA+A+++
More specs
Controlsrotary knob + buttonsrotary knob + buttons
DisplayLEDLED
Door openingleftwardleftward
Noise level (spin)
73 dB /59 dB when washing/
73 dB /59 dB when washing/
Dimensions (HxWxD)85x60x41 cm85х60х48 cm
Country of originBelarusBelarus
Color
Added to E-Catalogseptember 2016september 2013

Water consumption per cycle

The volume of water used by the washing machine during a standard wash cycle. It is measured while washing the maximum amount of cotton underwear for this model with a normal programme and a temperature of 60 degrees.

When evaluating efficiency, one should consider not only the actual water consumption but also the maximum load. So, for example, a model with a load of 7 kg and a consumption of 49 litres per kilogram of laundry will be more economical than a model of 5 kg with a consumption of 40 litres: the first consumes 49/7 = 7 litres per 1 kg of laundry, the second 40/5 = 8 litres per kilogram. This moment is important, first of all, if a large amount of washing is expected.

Many modern automatic washing machines are equipped with intelligent systems that can adjust the water consumption to the actual load and avoid overspending.

Surge protection

Power surge protection automatically turns off the washing machine in case of power surges. It protects the device's electronic circuits from hazardous loads and prolongs their service life. In this case, the programme running at the time of shutdown is remembered. And when the power is restored washing cycle continues from the point at which it stopped.

Leak protection

An automatic safety system that controls the integrity of the system for supplying and draining water to the washing machine and stops the water supply in the event of a leak. The protection can be installed on the hoses, on the body, or both (full protection).

Leak-proof hoses are equipped with special sensors and solenoid valves at both ends that shut off the water supply in the event of a breach in the hose. They can be used for both sampling and draining water. It is worth noting that for most washing machines, leak-proof hoses can be purchased separately, even if they are not included in the original package.

Protection of the body of the washing machine is carried out using sensors installed on the bottom of the device isolated from water. When water enters the bottom, its supply to the machine is turned off. The presence of leak protection allows you to avoid troubles like a short circuit or a flood in the house. However, leak-proof machines are more expensive than conventional machines, all other things being equal.

Energy class

This parameter characterizes the efficiency of electricity consumption by the washing machine. Classes are designated in Latin letters from A to G, in ascending order of energy consumption. At the same time, in class A there are subclasses "A+", " A++ " and "A+++"; more pluses means less energy consumption, and the most economical option to date — A +++ — outperforms class A by almost a third.

Machines of classes A + and above are today considered economical, class A — medium, lower classes — high consumption. However, indicators below A are typical for semiautomatic low-cost models. As well as for units with dryers (see above) in which high energy consumption is simply inevitable.

Dimensions (HxWxD)

General dimensions of the washing machine in height, width and depth.

The size of the unit determines not only the size of the space required for installation but also the ability to bring it into a particular room. At the same time, even a relatively small protruding part (like a door latch) can create problems with passing through a doorway. Therefore, in our catalogue, we try, if possible, to indicate exactly the maximum size of the machine — taking into account all the protruding parts. On the other hand, not all manufacturers provide such data. So if there is any doubt, it is worth evaluating the product by size with a certain margin. And specific information on how the dimensions were measured can usually be found in the manufacturer's documentation.

Finally, let's touch on the specifics of individual dimensions. So, in the case of front loaded machines, note that additional space in front inevitably will be required to open the door. Machines whose depth does not exceed 40 cm are considered narrow. They can be a lifesaver in cramped conditions, especially if the design provides top loading. And a height of 120 cm or more is an almost unmistakable sign of a machine with 2 drums which are located one above the other. It does not only increase capacity but also allows you to simultaneously wash two sets of things in different modes. The reverse side of these advantages is traditional...— high cost.
Atlant CMA 70C1010 often compared