Steam wash
A special washing mode. Instead of water, hot steam is supplied to the drum of the machine. Steam penetrates better between the fibres of the fabric, which makes washing more effective than washing with hot water. At the same time, due to the high temperature of the steam — above 100 degrees — the best antibacterial effect is achieved since water in the liquid state rarely heats up above 95 degrees in washing machines. In addition,
steam wash saves water and electricity, but such machines themselves are quite expensive.
Controls
The type of controls provided in the washing machine.
— Rotary knobs. Operation through one or more rotary knobs only, without buttons or other additional elements. This option is found exclusively in semi-automatic (activator) washing machines with minimal functionality. In the simplest of these models, there is only one knob (it sets the duration of the wash) in more advanced ones — two or three (wash timer, spin timer, programme selection). At the same time, the timer knob simultaneously works as a switch, turning on the unit when turning.
—
Rotary knob + buttons. Type of control used in most automatic washing machines. The main rotary knob in such models is responsible for selecting the programme. It can be supplemented by auxiliary knobs for setting individual parameters: for example, water temperature and spin speed. And other parameters and additional functions are controlled by buttons. Such controls are quite functional and inexpensive, which led to their popularity.
—
Rotary knob + touch controls. Controls, providing a combination of a rotary knob with touch controls. The first is responsible for choosing the main programme; the second is for additional functions and parameters. Such control is somewhat more expensive than the "rotary knob + buttons" combination (see above), but this moment is not fundamental. At the same time, the touch panel gives the device a sty
...lish and technological appearance, and on the practical side, it is more convenient for some users since it does not require effort to press. In addition, it is much easier to clean the touch controls from dirt than the buttons.
— Touch controls. Control, carried out only through the touch panel, is much more expensive than the “rotary knob + touch controls” combination and therefore is used mainly in advanced level machines. Units with such controls do not have unnecessary protruding parts on the front panel, which provides not only a neat and pleasant appearance but also ease of cleaning from dirt. And in some models, the touch panel can be placed on the lid of the drum, which allows you to increase its diameter and capacity without increasing the height of the machine itself. At the same time, in some cases (for example, when choosing a programme), the touch controls are less visual and intuitive than the rotary knob, so this option is used relatively rarely.
— Buttons. Button-only controls are fully functional but generally less user-friendly and visual than a combination of buttons with a rotary knob. Therefore, this option is not popular in modern washing machines.Dimensions (HxWxD)
General dimensions of the washing machine in height, width and depth.
The size of the unit determines not only the size of the space required for installation but also the ability to bring it into a particular room. At the same time, even a relatively small protruding part (like a door latch) can create problems with passing through a doorway. Therefore, in our catalogue, we try, if possible, to indicate exactly the maximum size of the machine — taking into account all the protruding parts. On the other hand, not all manufacturers provide such data. So if there is any doubt, it is worth evaluating the product by size with a certain margin. And specific information on how the dimensions were measured can usually be found in the manufacturer's documentation.
Finally, let's touch on the specifics of individual dimensions. So, in the case of front loaded machines, note that additional space in front inevitably will be required to open the door. Machines whose depth
does not exceed 40 cm are considered narrow. They can be a lifesaver in cramped conditions, especially if the design provides top loading. And a height of 120 cm or more is an almost unmistakable sign of
a machine with 2 drums which are located one above the other. It does not only increase capacity but also allows you to simultaneously wash two sets of things in different modes. The reverse side of these advantages is traditional
...— high cost.
