Comparison LG F2J6WS0W white vs LG FH2A8HDN2 white

The maximum amount of dry laundry at which the washing machine provides normal washing quality and does not experience overload. For two people, a machine with a capacity of up to 5 kg is enough, for more — accordingly, more. The optimal value for families are models for 6 and 7 kg. For large families, washing machines for 8 kg, 9 kg and even 10+ kg will be appropriate. For small apartments, it is worth noting narrow washing machines that have a depth of up to 40 cm, but at the same time capacity like in full-size machines.

Note that for different work programmes the allowable capacity can also be different. For example, for a quick wash, this number is most often noticeably less than the maximum stated in the specifications. These details should be specified in the instructions for the unit.

The volume of water used by the washing machine during a standard wash cycle. It is measured while washing the maximum amount of cotton underwear for this model with a normal programme and a temperature of 60 degrees.

When evaluating efficiency, one should consider not only the actual water consumption but also the maximum load. So, for example, a model with a load of 7 kg and a consumption of 49 litres per kilogram of laundry will be more economical than a model of 5 kg with a consumption of 40 litres: the first consumes 49/7 = 7 litres per 1 kg of laundry, the second 40/5 = 8 litres per kilogram. This moment is important, first of all, if a large amount of washing is expected.

Many modern automatic washing machines are equipped with intelligent systems that can adjust the water consumption to the actual load and avoid overspending.

It is worth noting that the cotton, synthetics, wool, rinse, drain and spin programmes are mandatory for almost any washing machine, and there is no need to specifically specify their presence. Therefore, only more rare and specific modes are indicated here: custom programme, quick wash, delicate, hygiene (baby care), sportswear, dark garmentjeans, shirts, outerwear, down clothes, bedding, blankets, refresh (no washing), night wash and self clean, etc. Here is a description of these and some other popular modes:

— Custom programme. A programme, all the parameters of which can be configured manually: set the temperature, duration, spin speed, additional processing features, etc. at your discretion. It significantly expands the possibilities for working with the machine and allows you to select the optimal modes for special cases when the list of ready programmes is not enough. In the simplest models, a "custom programme" is created based on one of the standard modes, in which the...user makes his changes. For the next use of such a programme, it is enough to select it on the control panel without setting the settings again. In more advanced units, it is possible to store several unique programmes in memory at once.

— Quick wash. The quick wash programme is especially useful for lightly soiled items that do not require thorough treatment (for example, casual clothes after a hot day). In addition to time, such a programme also allows you to significantly save water and electricity. Well, of course, it can be real salvation if the time for washing is limited, but you can’t do without it. Often, the design provides more than one quick wash mode — for example, for 15 and 30 minutes. It allows you to choose the option that is optimal in terms of speed/economy and thoroughness.

— Delicate wash. A programme designed for sensitive materials — fine silk, cambric, lace fabrics, some types of nylon and polyester, etc. Usually, washing in this mode occurs with an increased amount of water and the permissible load does not exceed 2 kg — all this reduces the friction of items among themselves, and large volumes of water also allow you to effectively rinse the fabric. Spinning is usually carried out at low speeds or skipped altogether. And in some models, other options for delicate washing may be provided; they should be specified separately. However, if you plan to wash things that require especially careful handling, you cannot do without this programme.

— Hygiene (baby care). The mode implies increased thoroughness of processing. It is designed to remove dirt, pathogenic bacteria, etc. from the processed items as much as possible. Such effective processing is especially important for clothes intended for young children Therefore, most often this programme is just called “baby care”. This mode has two main features. Firstly, by default, washing is carried out at an elevated temperature — this ensures the effective removal of contaminants and the destruction of germs. Secondly, rinsing after washing is done with great care — so that even in the most hard-to-reach folds there are no traces of detergent left. In some machines, other nuances are also provided; they should be specified separately.

— Sportswear. Special programme for processing sportswear between workouts. Such clothes are usually soaked with sweat but there are not so many other contaminants on them. It is sufficiently resistant to mechanical stress but does not always allow high temperatures. Workouts can take place daily, so spending a lot of time on washing can be a luxury — after all, things must also dry. This is taken into account in this mode: “sportswear” washing usually involves a small load and low temperature, and reduced spin speeds may also be provided. However, the specific features of this programme, again, do not hurt to clarify separately.

— Dark garment. A key feature of dark fabrics is that even minimal detergent residues are clearly visible on them. Therefore, a mandatory feature of the programme for dark clothes is thorough rinsing. In addition, this mode often provides gentle processing in general — so that things retain their original colour longer and do not form wrinkles on them.

- Denim clothes. Despite the overall strength and reliability, denim is quite sensitive to intensive washing. Therefore, in washing machines for such things, a special gentle mode with a lower temperature and a reduced speed of rotation of the drum can be provided. This mode is also well suited for thin shirts, which is why in some models it is called accordingly - for example, "shirts / jeans".

- Shirts. Special program for delicate washing of shirts and other business style clothes. The key feature of this mode can be called a small load at low speeds and a short spin time, in order to avoid the formation of wrinkles on the fabric.

- Down jackets (down things). Natural fluff easily accumulates water and is very reluctant to "return" it. Therefore, one of the features of this program is usually long pauses in the rotation of the drum - so that the water that has accumulated in the product has time to drain effectively.

- Outerwear. A special program for washing demi-season and winter jackets with an emphasis on respect for the filler of the upper wardrobe. The mode involves the use of low temperature, low rotational speed of the drum and gentle spin. This program also helps outerwear fabrics retain their waterproof properties.

- Bed sheets. Program adapted for the gentle washing of sheets, duvet covers and pillowcases. For best results, it is suggested to load the same type of bed linen into the washer drum. The program is usually aimed at work with a small load (2-4 kg).

— Blankets. Care mode for duvets and bedspreads of various types. As a rule, this program is designed for washing voluminous bed linen in the manner of duvets. One of its features is usually long pauses in the rotation of the drum - so that the water that has accumulated in the product has time to drain effectively. This program is also suitable for washing lined and downy items.

— Refresh (no washing). A special mode for processing things that do not require a full wash but need cleaning. A typical example of such things is clothes that have been “idle” for a long time, accumulating dust and unpleasant odours, or things that have been worn once and not for long. In the refresh mode, the machine does not use water but other methods of processing fabrics. One of the most popular options is an intense stream of hot steam: it removes or destroys substances responsible for an unpleasant smell, blows out dust from fabrics that could accumulate there, and also facilitates the removal of wrinkles on fabrics, which are smoothed out when dry. bad. Another option for refresh is blowing with active oxygen. This method does not remove dust as effectively, but it perfectly eliminates unpleasant odours. Anyway, when refreshing, detergents are not used, and clothes are not wetted with water, and in extreme cases, slightly moistened. Often things can be used almost immediately after being removed from the drum.

— Self clean. A utility programme for cleaning the insides of the machine from various contaminants that may accumulate during operation. In this mode, things are not loaded, and the drum is intensively washed with hot water, which allows you to effectively clean it and destroy pathogenic bacteria. However, it is worth noting that in many models this programme practically does not differ from ordinary washing at a high temperature (about 90 °C). So even in the absence of a special self-cleaning mode, similar results can be achieved by running a high-temperature wash with an empty drum without spinning.

- Night wash. Low noise program designed for washing machine at night and similar conditions. In this mode, the machine works as silently as possible: with smooth movements of the drum, low spin speed and turning off the sound signals of the equipment. The rest of the washing parameters are usually set manually.

A special washing mode. Instead of water, hot steam is supplied to the drum of the machine. Steam penetrates better between the fibres of the fabric, which makes washing more effective than washing with hot water. At the same time, due to the high temperature of the steam — above 100 degrees — the best antibacterial effect is achieved since water in the liquid state rarely heats up above 95 degrees in washing machines. In addition, steam wash saves water and electricity, but such machines themselves are quite expensive.

The presence of a jet rinse function in the machine. Such rinsing, by the name, is carried out by strong jets of water sprayed from special nozzles. It ensures higher efficiency than the traditional method and reduces water consumption and washing time.

The type of controls provided in the washing machine.

— Rotary knobs. Operation through one or more rotary knobs only, without buttons or other additional elements. This option is found exclusively in semi-automatic (activator) washing machines with minimal functionality. In the simplest of these models, there is only one knob (it sets the duration of the wash) in more advanced ones — two or three (wash timer, spin timer, programme selection). At the same time, the timer knob simultaneously works as a switch, turning on the unit when turning.

— Rotary knob + buttons. Type of control used in most automatic washing machines. The main rotary knob in such models is responsible for selecting the programme. It can be supplemented by auxiliary knobs for setting individual parameters: for example, water temperature and spin speed. And other parameters and additional functions are controlled by buttons. Such controls are quite functional and inexpensive, which led to their popularity.

— Rotary knob + touch controls. Controls, providing a combination of a rotary knob with touch controls. The first is responsible for choosing the main programme; the second is for additional functions and parameters. Such control is somewhat more expensive than the "rotary knob + buttons" combination (see above), but this moment is not fundamental. At the same time, the touch panel gives the device a sty...lish and technological appearance, and on the practical side, it is more convenient for some users since it does not require effort to press. In addition, it is much easier to clean the touch controls from dirt than the buttons.

— Touch controls. Control, carried out only through the touch panel, is much more expensive than the “rotary knob + touch controls” combination and therefore is used mainly in advanced level machines. Units with such controls do not have unnecessary protruding parts on the front panel, which provides not only a neat and pleasant appearance but also ease of cleaning from dirt. And in some models, the touch panel can be placed on the lid of the drum, which allows you to increase its diameter and capacity without increasing the height of the machine itself. At the same time, in some cases (for example, when choosing a programme), the touch controls are less visual and intuitive than the rotary knob, so this option is used relatively rarely.

— Buttons. Button-only controls are fully functional but generally less user-friendly and visual than a combination of buttons with a rotary knob. Therefore, this option is not popular in modern washing machines.

Diameter of the hatch of the front loaded washing machine. On the one hand, the larger the hatch, the more convenient it is to load laundry into the machine, especially large items like bedding. On the other hand, a large hatch requires adequate space in front of the machine.

General dimensions of the washing machine in height, width and depth.

The size of the unit determines not only the size of the space required for installation but also the ability to bring it into a particular room. At the same time, even a relatively small protruding part (like a door latch) can create problems with passing through a doorway. Therefore, in our catalogue, we try, if possible, to indicate exactly the maximum size of the machine — taking into account all the protruding parts. On the other hand, not all manufacturers provide such data. So if there is any doubt, it is worth evaluating the product by size with a certain margin. And specific information on how the dimensions were measured can usually be found in the manufacturer's documentation.

Finally, let's touch on the specifics of individual dimensions. So, in the case of front loaded machines, note that additional space in front inevitably will be required to open the door. Machines whose depth does not exceed 40 cm are considered narrow. They can be a lifesaver in cramped conditions, especially if the design provides top loading. And a height of 120 cm or more is an almost unmistakable sign of a machine with 2 drums which are located one above the other. It does not only increase capacity but also allows you to simultaneously wash two sets of things in different modes. The reverse side of these advantages is traditional...— high cost.

The country in which the washing machine was manufactured (according to the manufacturer's statement). Despite the fact that production facilities in China are often used to assemble household appliances, specifically among washing machines there are many products assembled in Europe ( Germany, Italy, Poland, Romania, Slovakia, Slovenia, Turkey) or in the post-Soviet space ( Belarus, Russia, Ukraine).

There are many stereotypes about how the build quality depends on the specific "homeland" of the device. However, most of them are not justified: the thoroughness of quality control does not depend directly on the location of production. And within individual brands, the situations in this regard can be completely opposite: relatively speaking, for one company, Polish-assembled machines can be considered more reliable than Romanian ones, and for another, vice versa. In addition, such information (about which plant a given brand has is better) often turns out to be unconfirmed rumours. In light of all this, it makes sense to pay attention to the country of production. Especially if you fundamentally want (or do...not want) to support a certain state by purchasing products manufactured in it.