Comparison M-AUDIO Axiom AIR Mini 32 vs Alesis V49

The total number of keys on the keyboard.

The more keys provided in the design, the wider the instrument's own range, the more notes it can play without resorting to octave shift or transposition. On the other hand, this characteristic directly affects the dimensions and cost, and an extensive range is not required so often. Therefore, 88 -key instruments corresponding to a full-size classical piano keyboard are quite rare. But compact models with only 25 keys(2 octaves), on the contrary, are popular: for the purposes for which MIDI keyboards are used, this is often quite enough. Other common options are the 49 -key (4 octave) and 61 -key (5 octave) models; somewhat less common are 32 and 37 keys.

In this case, the size means the size of the keys in width — the length practically does not affect the game process.

— Full size. Standard-width keys, as on a traditional piano keyboard. Switching to such a keyboard from another instrument with standard keys does not cause any problems; Also note that this particular option is recommended for complex games. On the other hand, a full-size keyboard can take up quite a lot of space.

— Small size. Reduced width keys. It is worth paying attention to this option, first of all, if there is not much space for installing the keyboard and compactness is crucial: small keys allow you to reduce the size of the device. In addition, such keys can be useful for people with small hands. But for complex parties, they are worse than full-sized ones.

The hardness of the keys on a keyboard is the amount of resistance they provide when pressed.

— Unweighted. Very low rigidity: the keys literally "fail" under the fingers. Found mostly in entry-level keyboards; this is due to the fact that unweighted mechanics are inexpensive, but the low pressure resistance makes it difficult to select the optimal pressure and control the dynamics of the sound.

— Semi- weighted. Keyboards with medium resistance — not as high as on weighted keys, but noticeably higher than on unweighted ones. This option is considered optimal for active keyboards (see "Mechanics"): at a low cost, it gives quite good responsiveness and, with a minimum skill, allows you to accurately control the pressing force.

— Weighted. Keyboards with high resistance, which is comparable to the resistance of classical piano keys. Note that high effort in this case is an advantage: it allows you to bring the response of the keyboard as close as possible to the response of a classical piano and makes it easier to control the pressure and dynamics of the sound. Actually, by definition, all hammer-action models are made weighted (see "Mechanics"), but among active keyboards this option is rare — due to complexity and high cost.

The presence of the aftertouch function in the keyboard (aftertouch). The essence of this function is to track the pressure force on the key after it is pressed. In fact, this means that in models with aftertouch, you can control the sound not only due to the force and speed of pressing the key, but also due to the change in pressure on it after pressing; this gives additional features and allows you to use various specific tricks of the game. The specific ways of changing the sound “tied” to aftertouch can be different, depending on the synthesis settings set: for example, when recording a guitar part, you can tie a small change in tone to this function and imitate string bending, when recording a saxophone, change the volume of notes, and etc.

Relatively inexpensive models use a common sensor to monitor aftertouch, which monitors the average force of pressure on all keys pressed; in more advanced ones, separate sensors are installed for each key.

The presence in the keyboard of its own sustain control — the extension of the extracted note. With sustain on, the note continues to sound (slowly decaying) even after the key has been released—similar to depressing the right pedal on a piano. Note that many keyboards allow the connection of pedals, including to control this function (see "Connected Pedals"), however, here it means its own controller, which allows you to turn sustain on and off using the keyboard itself, without additional equipment.

The presence in the keyboard of the transport control function.

In this case, we are usually talking about support for the MIDI Machine Control standard, designed to control external recording and playback equipment. Such support actually turns the keyboard into an external remote control, allowing you to give commands from it to "Play", "Stop", "Pause", "Rewind" (forward and backward) and "Record". To do this, the design provides a separate panel with a set of appropriate buttons.

The number of encoder controlsprovided in the design of the keyboard.

Such a knob looks like a rotary knob, with which you can control various functions of the device to which the keyboard is connected — for example, turn the virtual knobs in the programme for recording and sound processing. At the same time, we note that a full-fledged encoder is capable of rotating 360 ° and turning to any angle in any direction, however, keyboards can also contain knobs with a limited rotation sector — they can also be called encoders. None of these options has a clear advantage: in some cases, an unlimited turning sector is more convenient, in others, a limited one.

The maximum number of pedals that can be connected to the keyboard at the same time.

Pedals are used as additional controls to change various keyboard settings. The “classic of the genre” in this sense is the sustain pedal (see “Sustain”) — if the device has one connector for pedals, then this will almost certainly be the input for just such a pedal. Keyboards are produced, where there are 2 or more such inputs — in addition to sustain, you can connect pedals to them for other adjustments and effects (in particular, changing the volume).