USA
Catalog   /   Automotive   /   Parts & Car Electronics   /   Chargers & Jump Starters

Comparison Sturm BC1212 vs RS JS-141

Add to comparison
Sturm BC1212
RS JS-141
Sturm BC1212RS JS-141
Outdated ProductOutdated Product
TOP sellers
Deviceboosterbooster
Specs
Battery voltage
12 V
12 V
Starting current300 А200 А
Peak output current400 А400 А
Built-in battery capacity12000 mAh14000 mAh
Charging gadgets (outputs)
DC connector for gadgets
General
Built-in flashlight
Power source12/230 V12/230 V
Size225x192x80 mm165x35x85 mm
Added to E-Catalogapril 2019october 2018

Starting current

Rated starting current of the starter or booster (see "Type").

In this case, we mean the current that the device in the engine start mode can produce for a relatively long time (at least 30 s, or even more). This indicator must not be lower than the rated starting current consumed by the starter of the car — otherwise the device simply does not have enough power to effectively scroll the starter and start the engine. Information about the required starting current can be clarified by the documentation for the machine, or by the characteristics of the battery that is used in it as standard. For most passenger cars, this figure lies in the range from 200 to 400 A ; less powerful starting devices are intended mainly for motorcycles and other similar vehicles, and more powerful ones for buses, trucks and other heavy equipment, among such “starters” there are models for 400 – 600 A and even more.

Built-in battery capacity

Capacity of the own battery provided in the design of the starter-charger.

As a rule, boosters and launchers with a power bank function are equipped with their own batteries (see “Type”). The main purpose of such a battery from the point of view of helping to “light up” is to provide the power necessary to start the engine. However, in some models the battery is responsible for other functions, such as the built-in compressor or flashlight. The larger the battery capacity, the longer the device can operate, and the more tasks it can perform on a single charge.

In starting devices with the powerbank function, this parameter is also given to estimate how much energy the battery can accumulate and then transfer to connected gadgets. It is important to consider that there is a nominal (declared) and real capacity - the latter is always less, because it takes into account the inevitable losses during energy conversion. Typically the difference is from 30 to 40%, i.e. a model with a conventional battery capacity of 10,000 mAh will not fully charge a smartphone with a 3,000 mAh battery three times, but at best will provide two power cycles, because in practice its working capacity is about 6,000 mAh. Therefore, it is not entirely correct to compare the mAh values of your gadget’s battery with the nominal capacity of the built-in battery - you should definitely take into account that the real capacity is always less than the “rated” one.
Sturm BC1212 often compared