USA
Catalog   /   Sound & Hi-Fi   /   Speakers

Comparison JBL PRX 815W vs JBL PRX 715

Add to comparison
JBL PRX 815W
JBL PRX 715
JBL PRX 815WJBL PRX 715
Compare prices 2
from $1,504.00
Outdated Product
TOP sellers
Featuresconcertconcert
Mountfloorfloor
Specs
Typeactiveactive
Number of channels1.01.0
Number of speakers22
Number of bands22
Crossover frequency2 kHz1.7 kHz
Power / frequency
Total rated power1500 W1500 W
Overall frequency range56 – 19000 Hz
58 – 17200 Hz /±3 дБ/
Design
Design features
bass reflex
horn design
bass reflex
horn design
Connectors
Inputs
RCA
combo Jack (6.35 mm) / XLR
RCA
combo Jack (6.35 mm) / XLR
Outputs
balanced XLR
balanced XLR
General
Tweeter size38 mm38 mm
Woofer size (LF/MF)381 mm381 mm
Finishing materialMDFMDF
Front speaker dimensions (HxWxD)71x45x36 cm71x45x36 cm
Weight21.6 kg21.6 kg
Color
Added to E-Catalogjanuary 2017june 2015

Crossover frequency

The frequency of the crossover provided in the speaker design.

The crossover is installed exclusively in the model with several stripes (see "Number of stripes"). This is an electronic filter that separates the incoming audio signal into separate frequency bands and directs each band to its "own" set of speakers. And the crossover frequency shows where the border between these ranges passes. If there are more than two bands, then there will be several similar boundaries: for example, for a four-band system, “0.15 / 0.8 / 2.8 kHz” or “0.12 / 1 / 3.8” may be indicated.

In most cases, this parameter is mainly of reference value: the built-in crossover frequencies are selected according to the performance of the speakers installed in the speaker.

Overall frequency range

The total frequency range that the speaker is capable of reproducing. Specified from the bottom of the range in the lowest frequency component to the top of the range in the highest frequency: for example, in a 2.1 system with main speakers at 100 – 22000 Hz and a subwoofer at 20 – 150 Hz, the total value will be 20 – 22000 Hz.

The wider the frequency range — the fuller the reproduced sound, the lower the likelihood that some part of the low or high frequencies will be "cut off". It is worth noting here that the human ear perceives frequencies on average from 16 Hz to 22 kHz, and from a practical point of view, it makes no sense to provide a wider frequency range in speakers. However, quite a few models go beyond this range, sometimes quite significantly (for example, there are speakers with a range of about 10 – 50,000 Hz). Such characteristics are a kind of "side effect" of high-end acoustics, and they are usually given for advertising purposes.

Thus, the lower limit of the range in modern speakers can be within frequencies up to 20 Hz, however, higher values \u200b\u200bare more common — 30 – 40 Hz, 40 – 50 Hz, or even more than 70 Hz. In turn, the upper limit in most modern speakers lies in the range 19 – 22 kHz, although there are deviations both upwards (see above) and downwards.
JBL PRX 815W often compared