Comparison Lapara LA-MicroUSB-OTG-HUB vs Defender Quadro Infix

— USB A. A classic, mainstream USB port that has recently been losing ground to the more advanced USB-C port.

— USB-C. This connector differs from the classic, full-sized USB in much smaller dimensions, as well as a two-sided design that allows you to insert the plug in either direction. This interface is rarely found in desktop PCs, but is becoming increasingly popular in laptops, tablets, and phones. Note that the Type C standard only describes the connector design; The USB version (interface) is described in the paragraph below.

— Lightning. Apple's proprietary interface used in its compact devices (iPhone, iPad, and iPod touch) since 2012. In terms of application features, it is completely similar to the microUSB described above, adjusted for the fact that it is found only in “apple” gadgets and is not used by other manufacturers.

— Internal USB. A variation of the USB standard used to connect internal card readers (see "Type", "Destination"). It differs from external USB in a connector; you can connect a card reader with such a connection only to the connectors on the motherboard; it is not compatible with external USB ports. Other characteristics are completely similar to the corresponding external USB standard (see above).

— microUSB. A reduced version of the external USB interface (see a...bove): the dimensions of such a connector are several times smaller than those of a full-sized one, which allows it to be used in portable equipment, in particular smartphones and tablets. Actually, card readers and hubs that use this interface to connect are usually designed for such equipment. Note that normal operation is possible only if the main device is capable of operating in USB host mode (this function is called USB On-the-Go).

— Wi-Fi. A wireless standard originally developed as a technology for building computer networks; later, Wi-Fi Direct technology appeared, which allows you to connect devices directly to each other. In card readers and hubs, this technology is found mainly among models designed for use with mobile devices (laptops, smartphones, tablets) that have a built-in Wi-Fi module. At the same time, the advantage over wired interfaces is not only the absence of wires and the corresponding freedom of movement, but also the possibility of simultaneously connecting several devices and exchanging data with them. And some models with Wi-Fi can even be connected to computer networks as full-fledged network drives. Of the shortcomings, it is worth noting the need for its own power source — either connecting to the network, which accordingly limits freedom of movement, or a battery that has a limited battery life (within a few hours).

— ExpressCard. A standard for connecting compact peripherals, mainly used in laptops. ExpressCard devices are usually 75x34x5 mm in size and are installed in a special slot in the computer case. Depending on the features of the system, it can provide speeds up to 2.5 Gbps, but in general it is less versatile and convenient than USB, due to which it is much less common and continues to lose popularity. Found exclusively in card readers (see "Type").

— Corporate outlet. Connecting external card readers (see "Intended use") through the original connector, which is usually used in the technique of a single manufacturer and does not comply with common standards like USB (see above). The scope of such models is quite limited, most often they are produced as additional accessories for certain models of portable equipment (for example, tablets).

The number of USB inputs located on the case of the card reader or hub (see "Type"). The number of USB ports that you will have at your disposal after connecting the device depends on this parameter. "Pure" card readers and combined models, usually, have 1, 2 and even 3 USB inputs, while hubs have 4 or more ports.

The number of USB Type C ports for connecting peripherals provided in the design of the hub (or card reader with the hub function — see "Type").

The port itself is small — only slightly larger than microUSB — and has a reversible design, thanks to which the plug can be inserted in either direction. That is why he has exacted respect and is actively replacing the classic USB port.

Despite its small size, USB Type C is used both in portable technology and in desktop PCs and peripherals for them. However, there are still few such devices available; because of this, hubs usually provide 1 USB-C port or 2 type C inputs.

External USB devices require power to work, which is supplied to them through the same USB port. However, the power of such power supply is relatively low (especially in version 2.0 ports, see "Connection"), and if several external devices are connected to one port of the computer through a hub, a situation may arise when the power is not enough for their operation. Connecting an external power supply to the hub allows you to avoid such situations: the hub receives additional power from the network and supplies power of the appropriate power to each of its inputs.

Another option for using devices with this function is charging portable equipment via USB: some models can work as stand-alone chargers that do not require connection to a computer.

The ability to disconnect the cable from the device through which it is connected to the USB port of the computer (see "Connection"). This gives a certain convenience during transportation — a removable cable is somewhat easier to lay than a non-removable cable, you can carry it separately, etc. In addition, it becomes possible to replace the cable — for example, if the regular cable is not long enough, or if it is damaged.

The length of the cable supplied with the device. Mostly relevant for models with a non-removable cable that cannot be replaced.

Light indicator, indicating that data is currently being exchanged between the memory card and the computer to which the card reader is connected. This allows you to avoid disconnecting the card reader during operation, which is fraught not only with data loss, but even damage to the device.

The main material used for the body of the device.

— Plastic. Plastic is light, cheap, quite practical, incl. has good strength properties. In addition, it allows you to create cases of complex shape and almost any color.

— Metal. As a rule, aluminium-based alloys are used for metal cases. Such cases are much stronger than plastic ones, and also have a stylish appearance. On the other hand, in terms of impact protection, this material has no advantages over plastic, but it costs more, and it can weigh much more.