USA
Catalog   /   Computing   /   Components   /   Sound Cards

Comparison RME HDSP 9632 vs Asus Xonar Essence STX II 7.1

Add to comparison
RME HDSP 9632
Asus Xonar Essence STX II 7.1
RME HDSP 9632Asus Xonar Essence STX II 7.1
Compare prices 1
from $366.00
Outdated Product
TOP sellers
Featuresaudio Interfaceaudiophile (Hi-Fi)
Specs
Typeinternalinternal
InterfacePCIPCI-E
Channels27.1
AudiochipASUS AV100
ASIO
 /2.0/
Mac compatibility
Additional power
DAC
DAC resolution24 bit24 bit
Max. sampling rate192 kHz192 kHz
Signal-to-noise ratio110 dB124 dB
ADC
ADC resolution24 bit24 bit
Max. sampling rate192 kHz192 kHz
Signal-to-noise ratio110 dB118 dB
Inputs
Jack (6.35 mm)1
RCA2
Optical S/P-DIF
/1xTosLink/
Coaxial S/P-DIF1
MIDI1
Outputs
mini-Jack (3.5 mm)1
Jack (6.35 mm)11
RCA28
Optical S/P-DIF
/1xTosLink/
Coaxial S/P-DIF11
MIDI1
Added to E-Catalognovember 2016september 2016

Features

Ordinary. This category includes all sound cards that do not have a pronounced specialization and do not belong to any of the types described below. Usually, they have a set of characteristics of an entry-level or intermediate level and are designed for simple everyday tasks: listening to music and game sound through ordinary speakers or headphones, communicating on the Web through a microphone, etc. Conventional sound cards are equipped with both digital-to-analogue and analogue-to-digital converters, they can be either internal or external.

Audiophile (Hi-Fi). Sound cards designed for lovers of high-quality sound; they can also be useful for professionals who are engaged in professional audio processing and need the most accurate reproduction of the received signal. Accordingly, models of this type are distinguished by high build quality, advanced components, as well as the presence of additional equipment, an abundance of interfaces and advanced customization options (both software and hardware, including even the ability to replace individual circuit components). However, these cards cost accordingly.

Gamer's. Sound cards originally designed as components for advanced gaming systems. Accordingly, the main purpose of such models is high-quality transmission of game sound, including three-dimensional and multichannel. Typically, gaming audio ca...rds are equipped with advanced DACs and support various special standards (see below); in addition, they may have additional equipment such as remote control modules (see below). The vast majority of models of this type are made internal, but they often have a rather original design (which is useful for modding enthusiasts who use transparent cases).

— CAP. Abbreviation for "Digital to Analogue Converter". Usually, this term refers to the constituent element of a sound card, but in this case it refers to a separate type of audio cards, the distinguishing feature of which is the absence of an analogue-to-digital converter (ADC). Accordingly, DACs are only capable of transmitting sound from a computer to headphones, speakers, etc., and cannot be used to digitize sound from a microphone or other external signal source. Note that this category includes a variety of models — from the simplest USB-headphone adapters, the size of a flash drive, to advanced audiophile-class solutions.

Audio interface. A kind of opposite to the DAC described above: audio interfaces are designed primarily to digitize the sound coming to the input (for example, from a microphone or an electric guitar). Accordingly, they are not only necessarily equipped with analogue-to-digital converters — usually, these ADCs have very advanced characteristics and extensive sound tuning capabilities (and in some models even hardware switches are provided for this). At the same time, audio interfaces can also work in the digital-to-analogue audio conversion mode (in other words, to output sound to headphones/speakers). The cost of such devices is usually quite high, so it makes sense to purchase them only for those who plan to work a lot with sound recording.

Interface

The main interface used to connect a sound card to a computer or other device.

Like the sound cards themselves, the interfaces used in them are divided into internal ( PCI, PCI-E USB, USB C, FireWire, Thunderbolt, 3.5 mm mini-jack, Bluetooth). Here is a more detailed description of each of these options:

— PCI-E. The main modern interface for connecting internal peripherals (including sound cards) to computer motherboards. Used in most internal type models (see above). The main advantage of solutions with PCI-E is that connectors for their connection can be found on almost any modern motherboard. True, these connectors may be needed for other components - a video card, a TV tuner, or even an SSD drive; however, even on the simplest motherboards, there are usually several PCI-E slots, so this point cannot be called a serious drawback.

— PCI. Interface for connecting expansion boards to the PC motherboard. It is the forerunner of PCI-E, has significantly lower bandwidth and more limited features, so is generally obsolete. Nevertheless, in our time, motherboards with such connectors and sound cards for the PCI interface (including quite advanced ones) continue to be produced. This is due to the fact that a relatively low bandwidth...is sufficient to work with sound; and installing an audio card in the PCI slot leaves PCI-E slots free, which may be required for components that are more demanding on connection speed. In any case, before buying such a sound card, it does not hurt to make sure that the "motherboard" has a connector for connecting it.

— USB. Connection via standard USB port. Until recently, this was the most popular interface for external peripherals, found in almost all PCs and laptops. It was under USB that most external sound cards were made. The disadvantage of this connection method is that USB connectors may be required for other devices, which creates problems with a small number of ports and an abundance of peripherals. On the other hand, such situations do not occur so often, and to solve them, it is enough to have a USB splitter (hub) on hand.

Separately, we note that the full-sized USB sockets in modern PCs and laptops have been replaced by more compact USB C (see below).

- USB C. Peripheral connector with a symmetrical contact group, which is often replaced by full-size USB ports on board modern PCs and laptops. Many new models of external sound cards are made for this interface. The exception to the rule are only individual instances for Thunderbolt (see below) - for them, it is Thunderbolt, and not USB C, that is indicated as a peripheral connection connector.

— Thunderbolt. A universal peripheral connector used primarily in Apple computers and laptops. It should be borne in mind that different generations of Thunderbolt differ in the type of physical connector: versions v1 and v2 use a miniDisplayPort socket, version v3 uses a USB C socket. So, when choosing a sound card with such a connection, you must definitely clarify this point. On the other hand, versions of Thunderbolt with different connectors are quite mutually compatible through the appropriate adapters.

— FireWire. It is also IEEE 1394. An interface for external devices, which some time ago enjoyed a certain popularity, but today it is practically obsolete.

- 3.5 mm (mini-jack). Mini-jack is one of the most common audio connectors. However, it is usually provided as one of the audio inputs (see below) and is rarely used as the main interface for connecting a sound card to an external device. Such a connection is found mainly in specialized gaming models, including those designed for use with consoles. At the same time, in such models, the mini-jack connector can be made combined, with the ability to connect both a linear (analog) signal via a conventional electrical wire, and an optical (digital) signal via a TOSLINK cable. Recall that the optical interface is notable for its complete insensitivity to external interference, it allows you to transmit multi-channel sound, however, cables for such a connection require care in handling.

— Bluetooth. Wireless connection according to the Bluetooth standard. It is found mainly in models designed for use with smartphones and tablets - there are few wired connectors in such gadgets, but Bluetooth modules are almost guaranteed. True, initially, with such a transmission, the sound is greatly compressed, which noticeably affects its quality; however, modern Bluetooth audio cards usually include support for aptX to remedy this shortcoming. Of course, the signal source must also support this technology - you should make sure of this before buying.

Channels

The most advanced multi-channel audio format that a sound card is capable of outputting.

2. Standard stereo sound on two channels — left and right. This format allows you to provide a sense of surround sound (especially when using headphones), which is quite enough for most simple tasks. However, it noticeably loses to multi-channel sound in terms of the "immersion effect", which can be critical for demanding gamers and audiophiles.

5.1. The classic and most popular multi-channel surround sound format today: a centre channel, two front and two rear channels allow you to achieve a full-fledged “surround effect”, and a separate subwoofer channel provides rich bass sound.

7.1. The 7.1 format differs from 5.1 by the presence of two additional channels. There are several options for localizing these channels — for example, a pair of side speakers, a pair of additional speakers above the front ones, etc. Anyway, the 7.1 format provides a more reliable surround sound transmission than 5.1, but such cards are more expensive, and there is less specialized content for 7.1.

When choosing a sound card by the number of channels, it is worth considering such moments. Firstly, multi-channel options are capable of producing sound in simpler formats (for example, a 7.1 card can be used for 5.1 acoustics), and stereo sound output is support...ed by all models in general. Secondly, modern multimedia software (in particular, codecs) allows you to output multi-channel audio through a card with fewer channels — for example, play 5.1 sound through a two-channel card with stereo speakers without quality loss. Thirdly, for the full-fledged operation of multi-channel sound, you will need not only a card, but also appropriate acoustics; therefore, it makes no sense to specifically look for a multi-channel model if you plan to use exclusively stereo speakers.

Audiochip

Brand of the audio chip installed in the sound card.

The audio chip is one of the most important parts of a sound card, a kind of "heart" of the whole circuit, and it is on its characteristics that the sound quality and other capabilities of a particular model largely depend. Knowing the brand of the chip, you can easily find various information on it — official specifications, test results, reviews, etc. — and based on this, draw a conclusion to what extent this sound card is able to meet your requirements. Of course, for ordinary video cards (see "View") there is no need to delve into such details, but when choosing a gaming or audiophile model, they can be very useful.

Mac compatibility

Ability to work sound card with Mac computers.

Mac (Macintosh) in this case can be attributed to both the eponymous line of desktop computers manufactured by Apple and MacBook laptops. Both of them have certain hardware differences from "regular" PCs and laptops, in addition, they were originally created for Apple's own MacOS operating system. All this led to specific requirements for peripheral devices, including and sound cards — not all models are able to work normally with a Mac. Therefore, if you purchase a sound card for such a computer or laptop, you should make sure that Mac support is directly claimed for the selected model.

Note that Apple products have very limited possibilities for replacing internal peripherals by the user, and sound cards are not included in the list of replaceable components at all. Therefore, Mac-enabled models are usually referred to as external (see "Type").

Additional power

The need to connect additional power to the sound card.

Most of both internal and external (see "Type") sound cards are powered directly through the connection connector (see "Connection interface"). At the same time, for normal operation of advanced models (for example, audiophile and gaming, as well as some DACs; see "View"), this power may not be enough, which requires an additional power source. In internal audio cards, it is carried out from the computer power supply, in external ones — directly from the 230 V network.

Signal-to-noise ratio

This parameter determines the ratio of the "clean" sound produced by the DAC at the output to all extraneous noise. As such, it is a pretty strong indicator of sound purity. According to the signal-to-noise ratio, DACs in modern sound cards can be divided as follows:

up to 90 dB — initial level;
90-100 dB — average level, advanced "home" models;
more than 100 dB — professional level.

Signal-to-noise ratio

The signal-to-noise ratio provided by the analogue-to-digital converter (ADC) of the sound card in the processed signal. For more information about this ratio, see the paragraph of the same name above. Here we note that in domestic use it does not play a decisive role, but if you plan to record sound in good quality, you should choose a card with a high value of this indicator.

Jack (6.35 mm)

The number of inputs in the design of the sound card using 6.35 mm Jack connectors. This connector is in many ways similar to the 3.5 mm mini-Jack described above (and is compatible with it through a simple adapter), however, due to its larger size, it is poorly suited for portable electronics. On the other hand, in the 6.35 mm standard it is easier to implement a three-channel connection scheme and ensure the transmission of a balanced signal (for more details, see "XLR"), which is often required in professional audio work. Therefore, connectors of this type are quite popular in advanced stationary technology, where connection reliability and signal quality are more important than compactness. The Jack input can be used for various purposes, which is usually indicated in the specifications; however, its very presence, usually, speaks of a rather high class sound card.

Note that on balanced XLR models (see below), a 6.35mm input can be built right into the XLR jack; in such cases, these interfaces cannot be used simultaneously.
RME HDSP 9632 often compared
Asus Xonar Essence STX II 7.1 often compared