Comparison ETE Saphir PC Saphir Warfare vs ETE K1 Gold

The number of slots for RAM modules provided on the PC motherboard. In this case, we are talking about slots for removable strips; for a PC with built-in memory, this parameter is irrelevant.

The slots available on the "motherboard" can be occupied all, partially or not occupied at all (in models without RAM). Anyway, you should pay attention to their number if the initially installed amount of RAM does not suit you (or ceases to suit you over time), and you plan to upgrade the system. The smallest amount found in a PC with removable memory is 1 slot ; if it is busy, you will only have to change the bar when upgrading. More connectors for RAM are always paired, this is due to a number of technical nuances; most often this number is 2 or 4, but it can be large — up to 16 in powerful workstations.

Note that when planning an upgrade, you need to take into account not only the number of slots and type of memory (see above), but also the characteristics of the motherboard. All modern "motherboards" have restrictions on the maximum amount of RAM; as a result, for example, the presence of two DDR4 slots does not mean that two strips of maximum capacity can be installed in the system at once, 128 GB each.

The maximum amount of RAM that can be installed on a computer. It depends, in particular, on the type of memory modules used, as well as on the number of slots for them. Paying attention to this parameter makes sense, first of all, if the PC is bought with the expectation of upgrading RAM and the amount of actually installed memory in it is noticeably less than the maximum available

So the amount of maximum installed memory depends on the number of slots in the PC and can be from 16 GB(a modest PC) to 64 GB and above. The most popular on the market are PCs with a maximum installed 32 GB of memory.

Audio format supported by the PC sound card. Specified depending on the device type. For classic PCs (see "Type"), the sound format corresponds to the largest number of channels that a computer can output through analogue outputs — the possibility of using one or another set of acoustics directly depends on this. And for devices with built-in speakers, primarily monoblocks (see "Type"), this paragraph usually specifies the format of the built-in acoustics.

Also note that digital interfaces like SP / DIF (see "Connectors") can provide more channels, but such a signal cannot be directly output to the speakers — you need an audio receiver or other additional converter. So the main parameter is considered to be the number of "analogue" channels or speakers. The options here might be:

— 2.0. Traditional stereo is the most modest format that can provide the effect of surround sound. Of course, such a sound cannot be compared in terms of “presence effect” with advanced standards like 5.1 and 7.1, but in many cases even it is more than enough. Note that the 2.0 format is most often provided for in monoblocks — it means the presence of a pair of built-in speakers; it can be difficult to provide more extensive acoustics in such PCs.

— 2.1. Two-channel stereo sound (see above) with a subwoofer to enhance the bass sound. For a number of reasons, it has not received much distribution, it...is found, again, mainly in monoblocks — in such devices two ordinary speakers and a “sub” are installed.

— 2.2. Extended version of the 2.1 format with two subwoofers. Theoretically capable of delivering more powerful and authentic bass, but at a higher cost, these benefits are rarely seen in fact. Therefore, it is used even less frequently than 2.1 — again, mainly in monoblocks.

— 4.0. Theoretically, 4.0 is a surround sound format with two front and two rear channels. At the same time, in a PC this format is found exclusively among monoblocks and usually means the presence of two additional speakers, in addition to the standard stereo speakers. The effect of "sound from all directions" on such a system cannot be achieved, but the sound is still better and more reliable than with 2.0 systems. However, the price also comes out higher, despite the fact that the difference in sound is not fundamental for everyone. Therefore, this format has not received distribution.

— 4.2. An extended version of the 4.0 described above, where a pair of subwoofers has been added to an improved 4-speaker stereo system. Due to this, the quality of the bass improves, but the dimensions and cost of acoustics increase even more, and therefore such systems are even rarer.

— 5.1. The classic format of full-fledged surround sound ("from all sides"): two front channels, one centre, two rear and a subwoofer. A lot of content has been released under this sound, and games often provide compatibility with 5.1 systems. At the same time, support for this format in its pure form is relatively rare among modern PCs. 7.1 audio cards are used much more often: having more advanced features, they almost do not differ in price and are quite capable of working with 5.1 as well.

— 7.1. Further, after 5.1, improvement of the idea of surround sound. Such systems have 5 traditional sound channels (2 to the front, 1 front centre and 2 rear), and 2 additional channels can be placed in different ways — as side, as "add-ons" above the front or rear, etc. In any In this case, the 7.1 format allows you to achieve a more reliable sound than 5.1, and its support in modern sound cards is very inexpensive.

— 10.2. A specific audio format used in some high-end multimedia monoblocks. The 10 main speakers in such devices are combined into a soundbar under the screen and provide as authentic surround sound as possible in systems without rear channels. In addition, such acoustics are often made multiband — that is, they include specialized speakers optimized for a specific frequency band and reproducing only it. This further improves the sound quality. And two subwoofers, in turn, allow you to achieve the corresponding bass characteristics. At the same time, this option is extremely rare — both because of the high cost and because it is easier to achieve the desired sound quality on separately selected acoustics.

The type of backlight provided in the design of the PC. Indicated by the part of the computer that is actually highlighted; most often this is the case, but other places of installation are possible, for example, cooling fans.

Anyway, this feature does not affect the functionality of the PC, but gives it an original and stylish appearance. This is especially appreciated by gamers, so most of the backlit configurations are just for gaming (see "Type"). The most advanced backlight systems may provide the ability to change colour and/or synchronize with other system components and peripherals.

The power of the power supply installed in the PC.

Theoretically, if you buy a ready-to-use computer, the power of the block installed in it is guaranteed to be enough for the normal operation of the system. However, even in such cases, it's ok to pay attention to this parameter: other things being equal, a more powerful PSU provides an additional margin in case of high loads and emergency situations. And if the system is bought understaffed (for example, without RAM or a drive), or it is planned to be upgraded (especially with the installation of “gluttonous” components like a discrete graphics card), you should definitely clarify whether the PSU has enough capabilities for this. The power of the power supply should definitely not be lower than the power consumption of the system, and ideally it should exceed it by at least 100 – 150 W — again, in case of unforeseen situations.

Also, this parameter must be taken into account in some situations when catering — for example, when calculating the total load when connecting a computer to an uninterrupted power supply (UPS).