Comparison Bosch KGN39VI306 stainless steel vs Bosch KGN39VI35 stainless steel

Inverter compressors are called compressors that can smoothly change the power of work.

The compressor is a pump that pumps freon through the cooling circuits of the refrigerator. A conventional (non-inverter) compressor has only one power level, and the cooling intensity changes due to periodic switching on and off: the longer the time of continuous operation and the fewer interruptions in operation, the stronger the cooling, and vice versa. Such a design is inexpensive, but it has several disadvantages — in particular, uneven cooling, relatively low temperature control accuracy, and a tendency to create power surges in the network where the refrigerator is connected. Inverter compressors run continuously, while the pump power varies depending on current needs. Thanks to this, refrigerators with compressors of this type are free from the described disadvantages and have some other advantages, such as low noise level and energy efficiency. On the other hand, such units are quite expensive.

The total capacity of the main working chamber of the refrigerator. If there are separate zero chambers, compartments for wine and other additional functions, this paragraph takes into account only the volume of the refrigerating chamber itself, without additional equipment. In the smallest modern units, this figure does not even reach 100 liters, in the largest it can exceed 400 liters.

The choice of capacity depends on the actual storage needs of the products. At the same time, both the volume of stocks and the frequency of their replenishment (every day, once a week, etc.) matter. The chamber should not be stocked completely; this adversely affects the quality of the refrigerator. On the other hand, it is worth remembering that large volumes accordingly affect the dimensions and price of the unit.

In general, for one or two people, a capacity of 200 – 250 liters, or even less, is considered quite sufficient. The optimal capacity for a family of three is about 250 – 300 liters, for four to five people — 300 – 350 liters, and larger volumes are really needed mainly for specific situations when food has to be stored in large quantities and for a long time.

The number of shelves supplied with the refrigerator. In this case, only shelves placed inside the main (refrigeration) chamber are taken into account. And closed drawers, which are usually at the bottom, are not considered shelves.

In general, this amount depends on the volume: the more spacious the refrigeration compartment, the more shelves are usually provided in the kit. At the same time, there is no strict dependence here, and refrigerators of similar capacity can be equipped with a different number of shelves. As for specific options, the most modest models come with 1 – 2 shelves, 3 shelves and 4 shelves can be called an average, and more are found in some units.

In most modern refrigerators the shelves are removable. In addition, they can be installed at different levels. In this case, it is not necessary to use the entire set: for example, if it is planned to place tall objects inside, one of the shelves can be removed, creating a vast space. And vice versa: if necessary, you can, usually, buy additional shelves. So the number of shelves in the kit only allows you to evaluate the overall possibilities for organizing space in the refrigerator. How to use these features depends on the user.

The capacity of the zero chamber provided in the refrigerator.

Typically, manufacturers choose the volume of the zero chamber by the total capacity and price category of the refrigerator. So this parameter is important mainly in cases where you plan to store many products at the same time that require the fresh zone. In such cases, it may make sense to sacrifice part of the volume of the refrigerator or freezer and choose a unit with a larger zero chamber. If the refrigerator is planned for normal domestic use, you can ignore this parameter.

The number of drawers into which the refrigerator freezer is divided. For top-mounted freezers (see “Freezer”), this paragraph may indicate the number of levels, taking into account the shelves the fridge is equipped (drawers are not used in such chambers).

On the one hand, the abundance of drawers makes it easy to distribute different types of foods in different compartments. On the other hand, more drawers (for the same total freezer capacity) mean less height and capacity for each drawer. So when choosing, you should consider what is more important for you — extensive possibilities for sorting content or the capacity of individual drawers. As for the specific quantity, most modern refrigerators have 3-drawer freezers — this number is generally considered the best compromise between the nuances described above. A larger number of drawers is found mainly in high-capacity units, but 1 – 2 freezer drawers can be found in all types of refrigerators — from small classic to large French Door and Side-by-Side (see "Product type").

The operating temperature of the refrigerator freezer.

The generally accepted standard for freezers is actually -18°C. It allows you to effectively store pre-frozen foods, as well as freeze them (with certain precautions). At the same time, for most modern refrigerators, lower temperatures are claimed — at -24 °C, and in some models even lower. However, such indicators are not always standard — in many units, they are achieved only in the fast freeze mode (see "Features"). This should be clarified separately. However, the temperature of the freezer below -18 °C means good freezing features.

In turn, chambers with more modest minimum temperatures — -12 °C, or even -6 °C — are only suitable for storing pre-frozen products; they are not suitable for freezing any significant amount of contents. However, there are very few refrigerators with such indicators on the market — mostly low-cost or outdated models.

To indicate the temperature of the freezer, markings in the form of asterisks (snowflakes) are often used, each of which means a decrease in temperature by 6 °C. For example, in models at -24 °C, you can find the designation * (***) — four asterisks, one of which is highlighted. This usually means that in the standard mode the freezer operates at -18 °C (three stars), and at another 6 °C (down to -24 °C) the temperature drops during fast freezing.

The average amount of energy consumed by a refrigerator in a year of operation. Of course, these figures are not absolutely accurate; the actual power consumption may vary depending on the specific operating conditions. However, this parameter makes it possible to evaluate the power consumption of the refrigerator and compare different models with each other. At the same time, it often turns out to be more convenient and visual than the energy consumption class (see above) because in this paragraph we are talking about a specific figure (from which you can also calculate the cost of electricity consumed). For clarity, let's take the following example: a small two-chamber refrigerator with energy class A can consume less energy per year than a large side-by-side unit of class A+++, although formally, in terms of energy consumption classes, the second model will be more economical than the first.

The country in which this refrigerator model is manufactured (according to the manufacturer).

There are many stereotypes associated with the relationship between the origin and the quality of household appliances. Thus, the location of production in Europe ( Germany, Lithuania, Poland, Romania, Serbia, Turkey, etc.) is considered more prestigious than in Asian countries ( China, Thailand) or CIS countries ( Belarus, Russia, Uzbekistan, etc.). And different European countries have a different reputation among buyers in this regard. However, these stereotypes should be treated with considerable distrust: the actual quality of products depends not so much on the geography of production, but on the quality of the organization of processes by a particular manufacturer. As a result, equipment of a similar level, produced by different brands in the same country, may differ markedly in actual quality.

It is worth to say that the same refrigerator model can be produced in several countries at the same time. And units of the same model, produced at different times at different plants, may be on the market at the same time. As a re...sult, it happens that one country of production is indicated in the general characteristics of the model and another in the documentation for the unit purchased. It is quite a normal situation. However, if the country of production is still important for you, you should clarify this point in advance before buying.