Comparison shavers

Electric shavers are divided into types depending on the design and principle of operation of the shaving heads.

— Rotary. Rotary shavers have characteristic round shaving heads inside which blades rotate. Their main advantage over foil is a better fit of the blades to the skin and, as a result, a more efficient and clean shave. And rotary models are generally less noisy. On the other hand, rotary heads can be uncomfortable for people with sensitive skin; this is especially true for inexpensive models — advanced products usually use special tricks designed to minimize irritation from shaving.

— Foil. In foil shavers, the blades do not rotate, but vibrate finely under the foil with small cells. This design is considered more gentle compared to the rotary, because foil reduces irritation and reduces the risk of cuts. However, in terms of shaving cleanliness, foil models, especially low-cost ones, can be noticeably inferior to rotary ones, and they are worse for wet shaving.

— Shaver (travel). Compact and lightweight electric shavers, free from extra attachments and trimming blades for longer stubble, are intended for a close and smooth shave. These shavers, often termed "safety razors," are favored in professional barbershops and are even nicknamed "road razors" for their ability to provide a shave without the need for foam or other products. W...ith their mesh head design, they can trim bristles to an almost bare minimum (around 0.1 mm). These razors are effective for facial shaving, refining beard and mustache outlines, and even edging hairstyling. They excel at handling short hair but might struggle with long and coarse growth. These razors are commonly used for defining haircuts and shaping sideburns and whiskers.

— Shaving trimmer. Shaving trimmers usually have a small head with cutting elements that allow you to precisely remove hairs or shape them into the desired shape. During operation, the hair is cut with the trimmer knives flush with the skin, and some models allow you to set the desired cutting height. Trimmers are good for creating contours of a beard and mustache, trimming eyebrows, sideburns or any other “vegetation” on the face. Some models can be equipped with attachments to change the shaving width or height.

— Dry. Dry shaving is suitable for shavers specifically designed for use on dry skin, excluding the application of creams, foams, or similar products. It's important to recognize that these models might have moisture-resistant qualities and tolerate water washes (as described below), but these features don't imply compatibility with wet shaving.

— Wet/dry. Shavers that can shave not only "dry", but also on wet skin, which is applied with foam or other shaving agent. Wet shaving is considered more gentle and is well suited for people with sensitive skin. However, such shavers are much more expensive than “dry” ones — after all, the shaving head must have certain features (so as not to clog with foam and not smear it instead of shaving hairs).

Models feature waterproof casing with varying levels of protection, often indicated by two numbers. The first number pertains to dust resistance and is often marked as X. The second number reflects moisture resistance, particularly water. For instance, IPX3 and IPX4 offer splash protection, IPX5 and IPX6 enable shower use, while electric shavers with IPX7 can be submerged underwater for up to 30 minutes.

— Built-in trimmer. Device for trimming the contours of facial hair. A trimmer is similar to a clipper, but smaller and better suited for fine work. Located directly on the body of the device.

— Blade for hair cutting. Removable version of the trimmer (read more about the trimmer above), made in the form of a replaceable nozzle and is installed instead of the main nozzle with shaving heads. Thanks to this, the trimmer can be made wider than the built-in trimmer, and overall more efficient.

— Nozzle for ears and nose. The cylindrical nozzle of small diameter allows you to penetrate the inlet and ear and remove unwanted vegetation from there. It is installed mainly on top of the main nozzle.

— Universal comb. Such a nozzle can be useful for regular care of the stubble or beard, when you need to trim, shorten, and not just shave. Length adjustment allows you to select the desired value for a particular area or depending on the image and type of "hairstyle".

The number of individual shaving heads (for rotary models) or foils (see "Type") in the shaver design. More heads/foils allow for more coverage and a better shave. Note that rotary shavers traditionally have at least 2 heads, but there can be one foil. The most popular are 3 head/foil models.

Model of replacement head(s) compatible with electric shaver. This data will be useful primarily when looking for spare nozzles.

— Turbo mode. The function of a short-term increase in the speed of rotation of the motor. This increases the performance of the shaver, which can be especially important when working with thick hair or in hard-to-reach areas. Note that the turbo mode, usually, is not intended for long-term operation.

— Auto-detection of bristles. The electric shaver's head contains a sensor to detect bristle density or stiffness. Through the automatic stubble feature, the shaver's motor adjusts power according to the skin area's requirements. This capability facilitates effective one-pass shaving, even with thick stubble. As the shaving head transitions from dense to moderate bristles, the motor power decreases automatically. This not only conserves battery life but also provides a gentler experience for the skin.

— Floating head/foil. The floating or movable shaving head(s) are capable of moving relative to the shaving unit and shaver body. Such a system follows the contours of the face during shaving, which ensures a tighter fit of the shaving heads to the skin, as a result — a cleaner and better shave, especially in difficult areas.

— Possibility of washing with water. Possibility of washing the shaving unit with water. This method is often much more convenient and effective than dry cleaning with a brush or other method.... Note that being washable with water does not necessarily mean wet shaving (see above).

— Cleaning indicator. A special indicator that notifies the user of the need to clean the shaver.

— Self-sharpening blades. Blades made using a special technology, thanks to which they sharpen themselves, due to friction against each other in the process. Thus, the blades remain sharp at all times, and their maintenance is limited to the replacement of worn blades.

— Child lock. Shavers featuring a safety switch are designed to activate only when held in the user's hand and intentionally turned on. This design prevents unintended activations, such as during travel when the device might shake inside luggage, avoiding unnecessary battery drain during idle moments.

— Case. Cases include all kinds of rigid structures for storing a shaver. Cases in the form of handbags made of thick fabric also fall into this category. In addition to reliable storage of the device, they also elevate the model to the highest class. In more low-cost electric shavers, a much more primitive fabric case is included in the package.

— Charging stand. A special stand on which the shaver can be installed to charge the batteries. There are no fundamental technical differences between such charging and charging from a power cord, the main difference is that the stand can also be used to store a shaver. Therefore, shavers with a charging stand are well suited for home use.

— Wireless charging. A special stand that charges the shaver without a precise connection through the plug — just put the electric shaver on it and the battery pack will automatically start recharging. This saves the user the hassle of connecting wires and reduces wear on the connectors. On the other hand, such a function has a significant impact on the cost of the battle and increases the duration of the charging process itself, since the charging platforms themselves are made low-power for safety reasons.

— Self-cleaning station. It is a special stand where the shaver is installed for automatic maintenance. This maintenance, as the...name suggests, primarily includes cleaning — the shaving unit is cleaned of hairs and dust - as well as charging the battery. In addition, self-cleaning systems can provide lubrication and disinfection of the shaving unit, but this function is less common and requires the use of consumables (oil and disinfectant).

— Facial brush. It is convenient to clean the face from the cut bristles with a brush. The brush that comes with an electric shaver usually has a medium bristle length. Some electric shavers are equipped with a universal brush, which is designed for both cleaning the face and combing the beard and mustache.

Type of power source used by the shaver:

— Mains. The shaver is typically powered by a household supply of 230 V, though other voltage variations are possible. When connected to this power supply, users don't need to worry about limited device operating time since the razor operates as long as there's mains voltage. This eliminates the concern of battery depletion. However, these razors rely on a power source and the cord can restrict movement. Modern models sometimes feature a hybrid system combining mains and battery power for greater flexibility.

— Battery. The shaver operates using its internal battery, offering maximum autonomy without needing an external power source. This design provides freedom of movement by eliminating the need for a mains cable. However, the battery's lifespan is finite, requiring periodic recharging. Inexpensive models lacking charge level indicators during use might pose a risk of running out of power unexpectedly, such as mid-shave, necessitating a recharge wait.

— Batteries. The shaver is powered by replaceable elements (batteries). Such devices, in their advantages and disadvantages, are in many ways similar to rechargeable ones: on the one hand, they are autonomous, on the other, the operating time is limited. The main difference is that a “dead” battery can be easily replaced if...you have spare ones with you; the built-in battery does not provide replacement, and the only option is charging, often quite long.

— From the cigarette lighter. Power supply from the car's on-board network through the cigarette lighter plug (or a separate auto socket of the same size). Shavers with this power supply can be charged and/or used directly in the car, which can be useful for those who spend a lot of time behind the wheel.