USA
Catalog   /   Automotive   /   Tyres & Rims   /   Car Pumps & Compressors

Comparison car Pumps & Compressors

Save List
Add to comparison
Einhell Pressito
Einhell Pressito
Compare prices 1
TOP sellers
Main
Hybrid compressor — operates from a 230 V network or from an 18 V battery (not included). Digital display.
Typecompressor
Power source
230 V
battery
Specs
Pressure gaugedigital
Max. pressure11 Atm
Performance21 L/min
Power90 W
Connectionplug
Hose length0.6 m
Battery
Battery in setno
Battery platformEinhell Power X-Change
Battery voltage18 V
Compatible batteries4511395, 4511396, 4511436, 4511437, 4511501, 4511502, 4511516
General
Autostop function
Air bleeding
Gauge backlight
Added to E-Catalogmarch 2019

Type

Electric (compressor). Tyre inflation devices driven by a built-in electric motor. Thanks to this, the compressors are as simple and convenient as possible to use: no physical effort is required for pumping, it is enough to connect the unit to a power source. The role of such a source can be performed by the on-board network of a car, a battery or a regular socket (see "Power"). In addition, such devices can provide a fairly high operating pressure; and many additional functions (auto-stop, lamp, pressure gauge backlight, etc.) can only be provided in the compressor. The disadvantages of this option include a relatively high price and the inability to work without a power source — for example, with a dead battery, such a unit may be useless.

Foot. Mechanical pumps with a foot drive: pumping is carried out by pressing a special pedal. Such units differ from electric models (see above), on the one hand, in battery life and relatively low cost, on the other hand, in low operating pressure and the need to expend energy on pumping. At the same time, foot pumps are less tiring to use than hand pumps (see below); and the mentioned pressure is from 3.5 to 10 atm — this is more than enough for passenger cars, and many models are also suitable for small tonnage trucks.

Manual. Mechanical pumps with manual operation. Usually, such a pump is installed vertic...ally during operation and is fixed due to special stops, on which the user steps with his feet, and the pumping handle must be moved up and down; however, there are also ultra-compact models like bicycle pumps, held while working on weight, in two hands. Anyway, hand pumps are lighter and cheaper than foot pumps, and are also more convenient to transport due to their small thickness. On the other hand, when using such a device, you have to put in a lot of effort — more than with a foot pump, not to mention a compressor.

Power source

Rated supply voltage used by the electric compressor (see "Type"); in fact, the types of networks with which the device is compatible.

12 V. Standard on-board voltage for passenger cars and similar vehicles such as light trucks and many motorcycle models. 12V compatibility is almost mandatory for modern compressors (only a few models are not capable of operating on this voltage). However, note that the methods of connecting to on-board networks may be different; see "Connection" for details.

24 V. A voltage of 24 V is typical for on-board networks of heavy equipment — trucks, buses, etc., as well as some powerful SUVs. In compressors, compatibility with this supply is usually provided in addition to 12 V; Pure 24-volt models are extremely rare.

230 V. Connecting to a regular 230 V household outlet. Most often, this option is used as a spare, in addition to 12 V — so that if there is a nearby outlet, the compressor can be powered from it without loading the car battery and without wasting fuel on the on-board generator. However, there are models that use only 230 V — they are designed for stationary use in tyre shops, service stations, etc.

Battery. Powered by a removable or built-in battery, it gives you the freedom to use the compressor and allows you to get rid of its hard wire connect...ion to the on-board car network or a household outlet. However, a dead battery will still have to be charged sooner or later. And in this matter, you can not do without a wired connection. Keep in mind that the battery may not be included in the standard package of some rechargeable autocompressors and will need to be purchased separately.

Pressure gauge

The type of built-in pressure gauge incorporated into the pump/compressor design. Modern pressure gauges differ mainly in the type of scale on which readings are displayed:

Analogue. A classic pressure gauge equipped with an analogue scale — a round “dial” with an arrow. Such devices are extremely simple and inexpensive, moreover, they are completely autonomous, do not require a power source and can be used in hand and foot devices. However, they are noticeably inferior to digital ones in accuracy: the scale is capable of displaying readings at best with an accuracy of a tenth of an atmosphere, (sometimes up to two tenths or even more), besides, the arrow tends to vibrate when pumped, which makes it difficult to determine the readings. On the other hand, such accuracy in fact is often quite enough, so analogue pressure gauges have been and remain the most popular option.

Digital. Pressure gauges equipped with an electronic display that shows pressure data. Such devices have high measurement accuracy — often up to hundredths of an atmosphere (or equivalent in other units), besides, they can provide various additional features — for example, hitchhiking (see below) or switching between measurement in atmospheres and and in pounds per inch2. At the same time, digital pressure gauges are much more expensive than analogue ones, the mentioned accuracy is rarely required in fact, and the...electronics require a power source, which makes it difficult to use in non-electric pumps (batteries would be required, and they have a limited operating time). As a result, this variant has not received much distribution.

— Is absent. There are quite a few pumps and compressors that do not have a pressure gauge at all. On the one hand, this does not allow you to monitor the pressure during the inflation process: you have to control the condition of the tyre “by eye”, and to measure the pressure, disconnect the unit and use a separate pressure gauge. On the other hand, such models turn out to be more compact and inexpensive than similar solutions with pressure gauges, and the described pumping procedure, although associated with unnecessary hassle, is generally not particularly complicated and does not present any particular difficulties even for inexperienced drivers.

Max. pressure

The maximum pressure provided by the pump or compressor — in other words, the highest tyre pressure that can be achieved using this unit.

In most models, this figure is from 2.5 to 10 atm, and in mechanical pumps (manual and foot, see "Type") pressure of more than 10 atm is practically not found at all. This is due to the fact that even for heavy trucks, the optimal tyre pressure is usually about 5 – 9 atm (depending on a number of parameters — there are special formulas and tables for calculations); and in passenger car tyres, a pressure of more than 2.5 atm is extremely rarely used. However, there are compressors with higher pressure parameters — 11 – 15 atm, 16 – 20 atm and even higher. The meaning of such characteristics is mainly in the "power reserve": a higher working pressure contributes to faster pumping. However, be careful not to over-inflate the tyre and damage it.

Performance

The capacity of the compressor (see "Type") is the maximum amount of air that it can pump into the tyre in a minute.

Higher performance reduces the time required to inflate the wheel; on the other hand, this parameter directly affects the dimensions, weight, power consumption and price of the compressor. So it is worth choosing according to performance, taking into account real needs. So, for a “duty” tyre inflation in a passenger car, a compressor with a low operating speed is quite enough — up to 20 L / min inclusive. And if the speed of full pumping is also important for you (for example, after replacing the rubber) — you can choose a unit for 21 – 40 L / min. In turn, models with more solid characteristics — 41 – 60 L / min and more — are intended mainly for heavy equipment like SUVs, trucks, tractors, etc.

Separately, it should be noted that this parameter is NOT suitable for calculating the exact inflation time (even if the exact volume of air in the wheel is known). The fact is that the actual performance of the compressor is always lower than the claimed one: the figures in the characteristics are indicated for free air outlet, and when pumping the wheels, the pumping speed will inevitably be lower due to the resistance of the nipple.

Power

Rated power consumed by the compressor during operation.

This parameter primarily affects the features of connecting the unit to the on-board network through the cigarette lighter socket. Such a socket has restrictions on load power, and these restrictions are different for different cars; and even in the same car, different connectors — the cigarette lighter itself and a separate socket of the same format — can differ in allowable power. However, most of these connectors can easily cope with units with a power of up to 100 – 120 W; but if you get a more powerful compressor, you should clarify the possibility of using it with a specific cigarette lighter (the easiest way to do this is according to the documentation for the car). If the device is planned to be powered through "crocodiles" or from a 230 V socket (see "Connection"), you can not pay much attention to the power consumption.

Also, more powerful compressors, usually, have a greater capacity and/or maximum pressure, but there is no strict relationship here.

Connection

Ways of connection to the power supply provided in the design of the compressor (see "Type").

Cigarette lighter. Connection to a standard cigarette lighter socket (or a separate auto socket of the same format). This method is convenient because the compressor does not need to open the hood. On the other hand, cigarette lighters have limits on maximum power, and in different cars (and even in different sockets of the same car), these limits can vary markedly. See Power Consumption for details.

Crocodiles. Connect directly to the battery terminals using crocodile clips. This method is somewhat more complicated than working from the cigarette lighter — you need to open the hood and pull the wires to the battery. On the other hand, it allows you to use the power of the on-board network to the fullest without worrying about overloads and the integrity of the fuses, making it suitable for even the most powerful and performant compressors. In addition, the “crocodiles” device can be connected not only to the on-board network, but also to a separate battery; in some cases, this possibility is useful (for example, if the car’s own battery is already running low, but there is a “fresh” battery nearby).

Cigarette lighter / "crocodiles". The ability to use any of the connection options described above is optional. This provides convenience and al...lows you to choose the optimal format of work depending on the situation. For example, for quick pumping of one or two wheels, you can use the cigarette lighter, but for long-term work, food through the “crocodiles” is better suited.

— Fork. Plug for connecting to a regular 230 V socket (see "Power"). It is used in compressors having only this type of supply.

— Cigarette lighter / plug. Available on both 12V and 230 V models; for the first, a cigarette lighter is used, for the second, a plug.

Cable (to the battery). Connection directly to the battery using cables with flat terminals, which are clamped into the battery terminals when connected. This design provides a tighter contact than the "crocodiles" described above, but is less convenient when connecting and disconnecting the compressor.

Hose length

The length of the hose through which air is pumped into the tyre. The larger it is, the more convenient the device is to use. But it is rare that the compressor is left far from the wheel, especially if a pressure gauge is placed on the device, which must be periodically checked. For domestic use in cars, a one and a half metre long hose is enough. Powerful and performant models can be equipped with a hose of 7 metres or more, but these are more solutions for commercial use in car services.

Battery in set

The presence or absence of a battery supplied with the corresponding compressor. This item may also indicate a built-in battery.

Models with a removable battery are usually produced for a specific battery platform (see the corresponding paragraph). The advantage of this solution is obvious: first of all, it allows you to use the same battery both to operate the compressor and for another power tool supporting a similar battery platform. For normal full operation of the device right out of the box, 1 battery is enough. The option without a battery becomes relevant if the customer wants to choose a power source separately, or when such a source is already on the household.

Many compressors are equipped with a built-in battery. This design saves the customer from fiddling with a separate charger, but does not allow you to quickly replace a dead battery with a fresh one - the only option is charging, which requires a power source and takes some time. However, models with a built-in battery are often more compact, which benefits them exclusively for future use.