USA
Catalog   /   Home & Renovation   /   Bathroom & Taps   /   Bathroom & Shower   /   Taps

Comparison Schock Neos-D 54212080 vs Schock Leva-D 51112080

Add to comparison
Schock Neos-D 54212080
Schock Leva-D 51112080
Schock Neos-D 54212080Schock Leva-D 51112080
from $161.49 up to $256.67
Outdated Product
from $128.76 up to $203.93
Outdated Product
TOP sellers
Suitable for
for kitchen
for kitchen
Tap typesingle leversingle lever
Spout
Shapestraight at an anglestraight at an angle
Pull out
Swivel
 /rotation angle 130°/
Rotation angle130 °
Jet depth225 mm200 mm
Jet height125 mm130 mm
Specs
Features
check valve
check valve
Stop valveceramicceramic
Installation
Installationdesktop (horizontal)desktop (horizontal)
Mounting holes1 шт1 шт
Mounting hole diameter35 mm35 mm
Inlet communication
hoses
hoses
General
Materialbrassbrass
Finish
granite
chrome
granite
chrome
Tap height176 mm180 mm
Country of brand originGermanyGermany
Color
Added to E-Catalogaugust 2012august 2012

Rotation angle

An angle to turn the drain. It is worth considering that in our case the angle is not considered relative to the center position, but the overall angle is right-left. In this way, the 110 degree value allows to rotate the mixer slurry with respect to the center position by 55° to the right and left.

Jet depth

Distance from the fixing point (for vertically mounted taps) or from the centre of the mounting hole (for horizontally mounted taps) to the middle of the spout. It is a characteristic that determines the "reach zone" of the tap.

Jet height

The jet height is usually specified for taps with horizontal installation (see "Type of installation"). It is measured from the base of the tap to the spout outlet. The large height of the spout is important primarily for kitchen models (see "Suitable for"), because it allows you to place large dishes in the sink. This parameter is directly related to the height of the spout (see above): the height of the jet cannot be greater than the height of the spout. Thus, in fact, one has to find a compromise between the height of the jet and the dimensions of the tap, especially if there is little space for its installation.

Tap height

The height of the tap, measured from its base or lowest point to the highest point of the spout. The height of the spout partly determines the installation possibilities — in fact, this is the minimum vertical free space that is required for the tap. In addition, in models with horizontal installation (see "Type of installation"), the spout height is related to the jet height (see below).