Comparison River Lux K013 vs Potato P60 P5860

The tap type is indicated by the type of controls installed in it. A number of features of both management and application in general depend on this. Nowadays, on the market you can find single cross handle, two cross handle, single lever (including those with additional touch control), non-contact and thermostatic taps, as well as push button models, which include both self-closing and thermostatic with a button. Here are the main features of these options:

— Single handle. Taps controlled by a single rotary handle (or a lever that moves in only one plane). In fact, they are not even "taps" as such, since they cannot mix hot and cold water and only regulate the pressure of the water supplied to them. It makes sense to use single handle models where the water temperature is constant and/or it makes no sense to regulate it — for example, in models for a kitchen filter (see "Suitable for"), for a washbasin where only cold water is used, or for an English-style washbasin, where hot and cold water is supplied from separate taps and mixed in the sink.

— Double handle. The classic design of taps, which does not lose popularity nowadays: two rotary handles responsible for...hot and cold water, respectively. This design is simple and inexpensive, while being reliable, moreover, it is convenient for precise temperature control. In addition, two handle taps are not afraid of the difference in the pressure of hot and cold water, and therefore it is recommended to use them with boilers. The disadvantage of this option is the impossibility of changing the pressure separately from the temperature and vice versa — any change requires turning both valves, while the pressure and temperature can fluctuate.

— Single lever. Taps where the flow of water is controlled by a single lever. Most often, turning the joystick from side to side in such models regulates the temperature, and tilting relative to the axis of rotation controls the pressure. This allows you to adjust the temperature without changing the pressure (and vice versa) and even “remember” the selected temperature option (just lower the lever to close without turning it sideways). At the same time, such devices are less accurate in adjustment than double cross handle ones.
Occasionally, you can also find a more specific variety — single-lever taps, supplemented by a separate temperature control lever (see below). In such models, the main joystick controls only the pressure.

— Push button. Models of mixers in which the control of turning the water supply on and off is assigned to a button. The first press turns on the water flow, the second turns it off. The button can be either an auxiliary means for conveniently turning on/off the water, or the main control element for the tap. In the latter option, to adjust the water supply pressure, the button is often made rotary.

— Self-closing. A variety of taps with button activation. However, here the button works on the principle of a timer: when you press it, water flows, and then a special mechanism gradually returns the button back, blocking the flow. Closing time is selected in such a way that one press allows you to more or less effectively wash your hands. Such devices are especially popular in public places, such as toilets of cafés, shopping centres, cinemas, etc.: there is no need to worry that an inattentive visitor will forget to turn off the tap. Most often, these taps are single-temperature, but there are also models with a temperature adjustment lever (see below).

— Thermostatic. Taps that have a thermostat function — that is, capable of automatically maintaining the temperature set by the user. Such models are extremely convenient: when the pressure or temperature of the water in the pipes fluctuates, you do not need to fiddle with the settings — the device will independently select the operating mode so that the outlet temperature does not change (or at least these changes are minimal). The main disadvantage of thermostatic models is the complexity of the design and, as a result, the high cost. In addition, many of them require an electrical connection. For control, models may include rotary controls or a button (see above).

— Non-contact. Models operated in a non-contact way — without the need to touch the device. This format of operation is most popular in washbasin taps (see "Suitable for"): in such models, a sensor is used that reacts to the presence of the user's hands under the spout. This is especially convenient in common areas where it is undesirable to touch the tap once again. There are other types of non-contact models — in particular, devices for the kitchen or shower. In the first case, it can be inconvenient to open an ordinary tap with dirty hands after kitchen work. At the same time, the control may not be completely contactless — there are devices with valves or other equipment for pre-setting the temperature, while the sensor in them works only as a water flow switch. And touchless shower taps necessarily have an additional control for setting the temperature; the sensor in them reacts not just to the hands, but to the whole person.

— Single-lever + touch. A variety of single-lever mixers (see above), equipped with an additional switch. As in conventional single-lever models, the joystick in such devices is used to adjust the pressure and temperature; the difference lies in the fact that the water is opened not by a lever, but by the mentioned switch. In other words, it is enough to set the optimal pressure and temperature once using the joystick — and then you can turn on the water by simply touching the switch. The device of the switch itself can be different: in some models, the entire tap's body plays its role, in others a special button or even a foot pedal is provided. The exception is the non-contact models described above — they may be similar in design and method of use, but all the same, these taps are classified into a separate category.

The shape of the handles provided in the design of the tap of the corresponding type — usually two-valve (see "Tap type").

This feature mainly affects the appearance of the structure, but different design options also have practical application features:

— Cross. Gates in the form of classic four-pointed crosses are the most popular design nowadays. It is great for retro-style taps, but can also be used in more modern designs. However, the main advantage of this option is the presence of reliable stops under the fingers, which makes cross handles very convenient to use. This is primarily due to their popularity. The disadvantages of "crosses" include some difficulty in cleaning due to the abundance of protruding parts; however, to facilitate this task, the bars of such a handle can be made removable.

— Round. This category includes both strictly round valves and parts that have small protrusions or recesses for a more secure grip (and in the first case, for the same purpose, a special notch may be provided around the circumference of the valve). Anyway, the main advantages of round products are a neat appearance and maximum ease of cleaning. On the other hand, this shape is the least secure to hold, requires a tight grip, and is most likely to slip the handle in the hand when turning. However, most often modern taps do not require much effort, and this moment is not particula...rly critical.

— Triangular. Handles with three pronounced cutouts or protrusions. The specific shape may be different: some models are very close to round, others have the shape of triangles, others differ from cross handles only in the number of rays. The stronger the shape of such a handle differs from a circle, the more reliable it is to hold. On the other hand, sometimes the best option in terms of design are more rounded models.

— Square. Handles with four pronounced cutouts or projections. Note that a strictly square shape is rare, mainly in expensive designer taps (in fact, for design reasons, it is used in them). Much more popular are "square" handles in the form of a kind of star with four rays/petals. This is a kind of compromise between round and cross-shaped: the handle turns out to be more secure in holding than round, and more convenient to clean than the "cross".

— Polygonal. "Handles with corners", not related to the triangular or squared described above. The most popular type of such parts is round rotary knobs with a set of protrusions — “rays” (from 5 or more) for reliable retention; however, there are also more specific options — for example, an oblate polygon that resembles a figure eight.

— Oval. Handles having an oval or close to it shape (for example, a rectangle with rounded corners). One of the options for this design is bath and shower taps, in which the body has a horizontal layout and elongated proportions, and the handles are located on the side ends of the body and are actually its continuation. Another option is a round handle shape with a flat cut on one edge for added retention. There are other, more specific options. However, anyway, "ovals" are rarely used, mainly among designer-level taps, and the role of this form is more aesthetic than practical.

Distance from the fixing point (for vertically mounted taps) or from the centre of the mounting hole (for horizontally mounted taps) to the middle of the spout. It is a characteristic that determines the "reach zone" of the tap.

The jet height is usually specified for taps with horizontal installation (see "Type of installation"). It is measured from the base of the tap to the spout outlet. The large height of the spout is important primarily for kitchen models (see "Suitable for"), because it allows you to place large dishes in the sink. This parameter is directly related to the height of the spout (see above): the height of the jet cannot be greater than the height of the spout. Thus, in fact, one has to find a compromise between the height of the jet and the dimensions of the tap, especially if there is little space for its installation.

— Brass. Alloy based on copper and zinc; at a relatively low price, it has good strength and corrosion resistance, due to which it has become widespread.

— Silumin. An alloy based on a combination of aluminium and silicon; it has good hardness and oxidation resistance, but it is rather brittle, and therefore it is used mainly in inexpensive models.

— Stainless steel. The most common material for inexpensive models. Steel is inexpensive and at the same time has high strength. Its disadvantage is a certain tendency to corrosion (especially with processing defects, even small ones), which practically does not affect everyday use, but can affect the durability of the tap.

— Zinc. Zinc products are similar in their main properties to the silumin products described above: on the one hand, they are inexpensive, on the other hand, they are quite fragile and not particularly durable. In addition, zinc is believed to be prone to corrosion, which can eventually degrade the properties of the water coming from such a tap and make this material unsuitable for kitchen use. Therefore, zinc bodies are not common, mainly among inexpensive bath and shower taps.

— Plastic. The simplest material used in the manufacture of taps. Due to its weak strength, it is not durable, but it does not rust. It is appropriate to use for sinks of rare use — for example, for a country house.

Type of additional finishing provided in the tap. This item can specify several options — this means that this model is available in different design options. And if the finishing material coincides with the body material, this means that there is virtually no additional coating; this is found, in particular, among taps made of stainless steel, which itself is quite resistant to corrosion.

In modern taps, the following types of finishing are used: granite, chrome, chrome with granite, chrome with gold, matte chrome, stainless steel (glossy or brushed), brass, nickel, copper, bronze, gold, as well as brushed in one color or another. Here are the features of each option:

— Granite. Granite is characterized by a pleasant appearance, moreover, it is available in an abundance of different colours, allowing you to choose a tap for the design of the kitchen. Of its advantages, it is worth noting high durability, absolute resistance to corrosion and good sanitary characteristics (prevents the growth of bacteria). The main disadvantage is the high...price.

— Chrome. Chrome plating is applied to metal surfaces primarily for corrosion protection; it has a characteristic shiny (almost mirror-like) appearance. Chrome provides high resistance to oxidation and damage, yet looks good and is inexpensive — as a result, it is one of the most widely used coating materials. Its main disadvantage is the tendency to get imprints on it over time; their removal is associated with certain troubles.

— Chrome/granite. The combination of chrome and granite finish in one product. See above for more details about the features of each of these materials, but here we note that their combination implies the presence of different types of finish in different parts of the tap. Thus, the design acquires a more original and stylish appearance, greater hygiene and resistance to contamination than pure chrome, while being cheaper than pure granite. And from the point of view of the overall design of a bathroom or kitchen, it is this combination that in some cases turns out to be the best option.

— Chrome/gold. The combination of chrome finish with individual "gold" sections. The features of chrome are described above, and the "gold" elements give the product a rich appearance, while a fairly large number of buyers prefer this combination to the “solid gold” finish.

— Matte chrome. A matte variation of chrome finish (see above). On such a surface, dirt, and prints are much less noticeable than on a classic glossy; in addition, it may be more suitable in design or simply more pleasing to the eye than glossy. At the same time, the creation of matte surfaces is associated with certain difficulties, and therefore they are relatively uncommon.

— Stainless steel (glossy). Stainless steel finish is generally similar in characteristics to chrome — it is durable and resistant to corrosion. However, such a surface is somewhat different in appearance and for a number of reasons it is used mainly in premium-class models — including taps made entirely of "stainless steel" (such models, in fact, have no finish).

— Stainless steel (brushed). Similar to matte chrome, such steel is more resistant to dirt than glossy (see above), otherwise it is completely identical to it.

— Brass. Brass coating is most often combined with a body made of the same material (that is, there is actually no special finish in such a tap). One of the advantages of such a surface is a pleasant golden hue, which is especially suitable for retro-style taps. At the same time, the cost of such products for a number of reasons turns out to be quite high, besides, they are prone to the appearance of hard-to-remove prints. Therefore, they are quite rare.

— Nickel. In terms of characteristics, nickel finish is similar to chrome and is used for the same purposes, however, for a number of reasons, it is much less common than chrome.

— Copper. Finish of characteristic reddish color. Copper can give an “old” look even to a modern product, and for retro-style taps, it can be simply irreplaceable. On the other hand, this material is expensive, in part because it is difficult for copper to provide sufficient corrosion resistance.

— Bronze. Bronze is an alloy based on the copper described above and is used similarly — mainly to provide an authentic look to retro-style taps. The main difference between the two materials is the color — the bronze is somewhat darker, and the red colour is not as pronounced in it (although specific shades in different models can also be different). In addition, this material is easier to make resistant to corrosion, so bronze products are much more common than copper ones.

— Gold. Yellow alloy finish to imitate the look of gold. It is used to give the tap a rich appearance, while at the same time it is expensive in itself, as a result of which it is used mainly in premium models — in order to emphasize the level of the product even brighter. On the practical side, like any material of this level, it is characterized by high resistance to oxidation, but resistance to pollution and ease of cleaning can be different (although in most cases these indicators are also on top).

— Brushed. A brushed finish that is applied specifically to give the product a certain color — most often black or white, but other options are also found. Accordingly, the main advantage of this option is a non-standard appearance: with paint, you can achieve colors that are not available with other types of finish. At the same time, any paint perfectly resists corrosion, and the differences between different models of taps with such a finish are mainly in durability and scratch resistance. These characteristics, usually, directly depend on the price category of the product.

The height of the tap, measured from its base or lowest point to the highest point of the spout. The height of the spout partly determines the installation possibilities — in fact, this is the minimum vertical free space that is required for the tap. In addition, in models with horizontal installation (see "Type of installation"), the spout height is related to the jet height (see below).

Country of origin of the brand under which the tap is marketed. Usually, it is indicated by the "homeland" of the manufacturing company or by the location of its headquarters. The brands under which modern mixers are produced come mainly from the following countries (in alphabetical order): Austria, Belgium, Germany, India, Spain, Italy, China, Poland, Russia, Turkey, Czech Republic, Finland, France, Sweden.

There are many stereotypes associated with the “nationality” of brands and products, but most of them have no basis nowadays. First, the actual place of production is often different from the brand's country of origin. Secondly, the quality of the goods depends not so much on geography, but on the policy of a particular company and how carefully this very quality is controlled in it. Therefore, you should pay attention to the country of origin of the brand only if you fundamentally want or (do not want) to support a manufacturer from a certain state. Quality is best judged by the reputation of a particular...brand and the overall price category of the tap.