USA
Catalog   /   Home & Renovation   /   Bathroom & Taps   /   Kitchen Sinks & Accessories   /   Kitchen Sinks

Comparison Omoikiri Mizu 78-2 780x480 vs Franke Polar PXN 651-78 101.0192.922 780x490

Add to comparison
Omoikiri Mizu 78-2 780x480
Franke Polar PXN 651-78 101.0192.922 780x490
Omoikiri Mizu 78-2 780x480Franke Polar PXN 651-78 101.0192.922 780x490
Outdated Product
from $68.80 up to $96.96
Outdated Product
TOP sellers
Main
Overflow hole. Additional bowl.
Mount type
mortise overhead
mortise overhead
Materialstainless steelstainless steel
Material thickness0.6 mm
Shaperectangularrectangular
Working surface
Main bowls11
Bowl locationleft / rightreversible
Additional bowl
Dish drying (wing)
Overflow
In box
automatic valve
 
General
Surface type
matte
 
matte /PXN 651-78/
textured /PXL 651-78/
Minimum cabinet width (base)600 mm600 mm
Working surface size780x480 mm780x490 mm
Mortise hole size (overhead)760х460 mm760x470 mm
Main bowl size (LxWxD)350x400х210 mm350x410x175 mm
Additional bowl size (LxWxD)180x312x160 mm172x310x105 mm
Country of originSwitzerland
Color
Added to E-Catalogmay 2015july 2013

Material thickness

The thickness of the material used for washing.

More "thick" models, on the one hand, provide strength and reliability, on the other hand, they differ significantly in weight and cost of the product. And accordingly, for each material, its own standards in thickness are applied.

So for steel, the values start from 0.6 mm, and in the most "heavy" models, this indicator reaches a thickness of 1.5 mm. The most common value (golden mean) is a thickness of 0.8 mm, there are also thicknesses of 1 mm and kitchen sinks of 1.2 mm

Bowl location

Position of the washing bowl relative to the entire body of the product.

The standard, most traditional variants are placement left, right or center (if viewed from the user’s point of view). Some models are available in both left and right layouts; they are marked in our catalogue as «left/right». There are also t. n. reversible sinks: they have a symmetrical shape and can be installed both left-handed and right-handed, at the user’s choice.

The choice for this parameter depends primarily on the layout of the kitchen and how it is necessary to fit the sink.

In box

Tap. The presence of a tap in the kit will eliminate the search for a suitable style. On the one hand, a tap in a set simplifies the purchase of a sink, but on the other hand, it often introduces certain restrictions. Thus, taps come in different designs and capabilities, as a result of which a complete solution may not satisfy user needs. We also note that this paragraph indicates only those taps that are officially presented in the portfolio of a particular manufacturer of kitchen sinks. Such sets can be assembled within one line or without being tied to a specific series, but purely according to style.

Colander. The colander supplied with the sink is usually a mesh or hole bottom tray through which water can freely pass. Such a tray can be used in the same way as a common colander - for washing cereals and ready-made pasta, for washing and drying fruit, vegetables and greenery, etc.

Cutting board. Availability of cutting board in the product delivery kit. Such a board, when used, is usually attached directly to the sink; this may be especially relevant in cramped conditions where there is not much space on the kitchen table.

Automatic valve. Device that facilitates filling the sink with water and draining this water. It consists of the valve itself, which closes the drain opening, and an exit button or lever..., which is installed in a convenient place - for example, near the mixer. To drain water, it is enough to press a button or lever, opening the valve - it is much more convenient and comfortable than to lower your hand in the water and reach the drain hole.

Mesh on bowl. Mesh made of durable wire mounted over the bowl; can be made removable or foldable. This device is mainly used as a dishwasher; it can be especially useful if the kitchen does not have space for a separate dryer, or if you periodically have to deal with a large number of dishes for which a separate dryer is no longer enough.

Detergent dispenser. Availability of a dispenser for liquid detergents. This device looks like a container with a characteristic cap and a long spout: when you press the cap, a portion of the contents is delivered through this spout. The size of each portion is very small - by pressing the required number of times, you can quite accurately dose the amount of detergent. Dispensers of this design save space in the kitchen, since most of their body is located under the sink. This affects not only the ease of use of detergents, but also the aesthetic design of the kitchen interior.

Siphon. The presence of a siphon supply kit is a characteristic curved tube for connecting a sink drain to a sewer. The complete siphon is by definition optimally compatible with the «native» wash; it saves you the hassle of searching and selecting.

Surface type

Type of washing surface made of stainless steel (cf. «Body material»).

Glossy. Brilliant, mirror surface, distinguished by attractive appearance. On the other hand, on such a surface quickly appear contamination and mechanical damage (traces from dried water, fingerprints, scratches, etc.), so to preserve the appearance it needs to be cleaned regularly, or even polished.

Matte. The matte surface does not look as bright as glossy - it is fainter, without pronounced reflections. On the other hand, such surfaces are less susceptible to contamination and damage: fingerprints, traces of dried water, scratches and scuffs on such surfaces are not as visible as on gloss.

Textured. Surface having a relief pattern with a depth of a fraction of a millimeter. This material is most convenient and practical from the point of view of maintenance, it perfectly masks contamination and is well resistant to scratches. The main drawback of textured surfaces is higher cost than matt and glossy. In addition, contamination and bacteria can accumulate in grooves, so clean such sinks should be with special care.

Country of origin

There are many national stereotypes: some countries seem more attractive to many users than others. However, in our time these stereotypes are practically grounded. First, in the country of origin of the brand, often only the headquarters of the manufacturer, and the production may be located in another State. Second, the origin from a certain country is not a guarantee of quality: everything depends on how carefully a manufacturer controls its products. Therefore, to assess the quality should be guided not by «nationality», but primarily by the reputation of a particular brand and price category of the product. Among the countries represented are: Germany, Italy, Poland, Romania, Serbia, list", > 3653/href/list."/list/53/pr-36269/">Switzerland, Japan.
Franke Polar PXN 651-78 101.0192.922 often compared