USA
Catalog   /   Home & Renovation   /   Furniture   /   Computer Chairs

Comparison Signal Q-049 vs Signal Q-019

Add to comparison
Signal Q-049
Signal Q-019
Signal Q-049Signal Q-019
from $85.12 up to $98.28
Outdated Product
from $70.88 up to $81.43
Outdated Product
TOP sellers
Featuresfor stafffor boss
Size and weight
Back height67 cm72 cm
Seat size (WxD)64x47 cm61x50 cm
Seat height45 - 57 cm40 - 48 cm
Design
Basecross with rollerscross with rollers
MechanismTilt (swing)Tilt (swing)
Headrest
Armrests
Adjustments
Rocking stiffness level
Seat height
Armrests
Full size
Soft
Material
Seat material
fabric
leatherette
fabric
leatherette
Back material
fabric
leatherette
fabric
leatherette
Base material
plastic
plastic
Color
Added to E-Catalogdecember 2015december 2015

Features

For the leader. The "director's" chair is designed not only to provide comfort to the leader, but also to emphasize his status and authority. Therefore, such models usually have a massive structure and larger dimensions than conventional chairs for staff, and also use more expensive materials (primarily leather and its analogues) — which ensures an appropriate solid design. Many executive chairs also have a specific shape with a slightly "failed" seat, headrests, etc.; all this is designed to increase the comfort of the seated.

For staff. Armchairs designed primarily for ordinary office workers. On the practical side, for the most part, they are less comfortable than executive models — in particular, they are rarely equipped with head restraints (see below) and lumbar support. At the same time, the key difference lies in the fact that in this case the emphasis is not on design, but on practicality. So, the design uses mainly inexpensive, but sufficiently durable materials (fabric, mesh, etc.), the weight of the chairs is small, which makes it easy to move them from place to place, and the shape of the seat and armrests is usually chosen in such a way that It was convenient for the seated person to get up and sit down often. However, models for staff are sometimes so good and functional that they can be safely attributed to managerial chairs, so such options can have a dual purpose — for the ma...nager and staff.

For visitors. The specificity of chairs of this type is that they, usually, are constantly in one place, while they are used by different people who have to sit for a relatively short time. Therefore, such models most often have bases in the form of legs or skids (see "Base design"), and their design as a whole is quite simple and rarely provides any additional adjustments. Nevertheless, in this class there are both simple products made of inexpensive materials that provide a minimum of comfort, and very solid-looking furniture, designed for richly furnished offices and not inferior in quality to the "director's" chairs.

Children's. Armchairs designed for children have appropriate design features — reduced dimensions and a specific shape of the seat and back. In addition, among such models there are options in a rather bright original design — with colour drawings, an unusual shape of the backs and seats, etc.

Gamer. Models created specifically for gamers stand out with a characteristic "aggressive" design, hinting at the seats of racers and pilots. However, they are often as comfortable as real racing seats, and the equipment includes at least a Tilt mechanism, and more often a more advanced solution such as a multiblock or synchro mechanism (see above). In general, this is a fairly advanced type of chair — but not cheap, respectively.

Back height

Chair back height; for models with a variable back height (see "Adjustments"), as a rule, the maximum value is indicated.

The back height is measured from the seat to the top edge. In essence, this is the height of support available to the back. In some situations, you can not pay much attention to this indicator - for example, if the chair is intended for visitors and the role of the back in it is purely symbolic. However, if you have to sit in a chair often and for a long time, this point should also be taken into account. Ideally, it's best to try a few chairs "live" and find out which backrest height is most comfortable for you. If this is not possible, it is worth deciding which area on the body the back should reach (to the shoulder blades, to the base of the neck, etc.) and measure at what height from the seat this area is in a sitting position. And if you need specific support for the back of the head, you should choose among models equipped with head restraints (see above).

Seat size (WxD)

Dimensions of the seat installed in the chair in width and depth (from the back to the front edge). For models with variable depth (see "Adjustments"), the maximum value is taken into account when the seat is pushed forward to the stop.

Most modern chairs are designed for the average adult, so paying attention to size is primarily for people of a large, or, conversely, miniature physique. In width, the average is considered to be 45 – 55 cm, the narrowest models are up to 40 cm wide, in the widest it can exceed 60 cm. Similarly, a depth of less than 40 cm is considered small, up to 60 cm — medium, more than 60 cm — large.

Seat height

Seat height from the floor. The optimal height for a person of average height is considered to be 40 – 50 cm, however, this moment is largely subjective, and the comfort of the chair for a particular user depends heavily on his preferences and physique. Thus, many models have the ability to change the height in a certain range (see "Adjustments"). To choose, it is best to determine “live” at what height you are comfortable sitting, and find a model with the appropriate characteristics.

Headrest

The presence of a headrest in the design of the chair.

The role of the headrest can be played as a stand, made separately from the backrest, and the upper part of the backrest — if it has a pronounced characteristic shape or a pillow is supplied in the kit, which can be installed at the request of the user. The simplest high backs that do not have a characteristic upper part are not considered head restraints.

Anyway, this feature provides additional comfort — especially when reclining back. On the other hand, if you have to sit mostly straight in the chair and the back plays a symbolic role, perhaps the best choice would be a model without a headrest(especially since such chairs are cheaper).

Full size

The armrests closed in a contour having direct connection with a back of a computer chair. Full size armrests are available in both adjustable and non-adjustable versions. In models with adjustable positions, the height of the armrests changes in conjunction with the adjustment of the angle of the backrest.

Soft

Soft pads on the armrests for comfortable hand positioning. Sitting in chairs with soft armrests for a long time is much more comfortable than in computer chairs with hard armrests.