Comparison Hammer Flex AMD3.6 vs Bosch GRO 10.8 V-LI Professional 06019C5000

The speed of rotation of the working nozzle provided by the tool. Some models have a fixed rotation speed, others allow you to adjust it within a certain range (see "Number of speeds").

For different types of tools and types of work, different values of this parameter will be optimal; therefore, it is worth choosing taking into account the tasks that are planned to be solved using the tool (it is best to consult with special sources). We note only a couple of general patterns. So, for engraving on relatively soft and pliable materials (wood, glass, soft metals), high speed is not required, but for hard and difficult to process (steel, precious stones), a high-speed tool is better suited. But when drilling, note that for the same power consumption (see above), more revolutions, usually, means lower torque values. That is, here “high-speed” tools are better suited just for soft materials, and low-speed tools are better suited for hard and heavy materials.

The diameter of the collet provided in the design of the rotary engraver (see "Device").

A collet is a specific type of fastening: a split sleeve, the “petals” of which can be compressed and unclenched by twisting / unscrewing the clamp. For a number of technical reasons, this mount is considered optimal for engravers. In order to properly install the working nozzle in such a tool, it is necessary that it fits the diameter of the collet (to be more precise, the mounting size of the nozzle should not exceed this diameter).

Note that there are several standard collet sizes. The most popular is 3.2 mm, but there are other options. And some engravers can be equipped with several mounts of different sizes.

The total number of working attachments supplied with the tool.

The abundance of attachments allows the machine to be used with various materials and for various types of work. At the same time, this parameter significantly affects the cost. Therefore, when choosing, you need to proceed from how important a variety of possibilities is for you - so as not to overpay for extra nozzles that turned out to be useless in fact.

Note that this item is indicated only for engravers (see "Device") - for models of other types, specific types of nozzles are given in the corresponding item (see below).

The number of batteries supplied with the respective tool (see "Power source"). This item may also indicate whether the tool has a built-in battery.

The most popular battery-powered kit option these days is 2 batteries. This provides additional benefits that are especially convenient for long-term continuous use of the tool. So, when one battery runs out of charge, you can quickly replace it with another; and while one battery is in use, the second can be charged. This allows you to minimize or even eliminate breaks for charging. Kits with one battery are not very common: these are mainly entry-level tools designed for small volumes of work, when breaks for charging are quite acceptable.

In addition, many modern cordless tools are supplied without batteries. This configuration assumes that the customer will purchase additional batteries at his own discretion (many models are compatible with several brands of power elements at once). In addition, this option may be useful if you already have a battery on hand. This happens quite often, since many well-known manufacturers use universal batteries suitable for different types of branded power tools. So, for example, a battery from a previously purchased jigsaw or grinder may well be compatible with an engraver or renovator from the same company.

As for non-removable batteries, this is a rather...rare and specific option. Such tools are as compact as possible, but the batteries themselves cannot be quickly changed - so during work you will inevitably have to take breaks for charging. Therefore, this power supply method is typical for low-power tools. In them, small dimensions are more important than a long period of continuous operation, in addition, low capacity allows you to achieve good autonomy even with small sizes (and, accordingly, capacity) of batteries.

The name of the battery platform supported by the device. A single battery platform is used to combine various power tools of the same brand into one line (renovator, engraver, screwdriver, grinder, circular saw, etc.). Devices on the same platform use interchangeable batteries and chargers. Thanks to this, for example, there is no need to select a battery for each individual model of a power tool, because one purchased as a spare battery can be used in various power tools, depending on the situation or as needed. Batteries of the same platform basically differ from each other except perhaps in capacity.

Nominal voltage of the battery supplied with the appropriately powered tool (see above).

This parameter is usually selected by the manufacturer in such a way as to optimally match the specifications of a particular model. Therefore, in fact, it is more of a reference than really meaningful. However, in some cases, voltage information can be useful — for example, if you are looking for a spare battery or want to replace a failed battery.

The capacity of the battery that the tool with the corresponding type of power is equipped with (see above).

Capacity is essentially the amount of energy a battery can store. The more powerful the device, the more energy it needs to work and the higher the battery capacity should be so that it does not have to be charged too often. At the same time, capacious batteries have a large weight and dimensions, which significantly affects the convenience of work. Therefore, the power of the battery tool is relatively low — otherwise, too bulky batteries would have to be used.

To some extent, this parameter also determines the time that the tool is able to work without recharging. However, taking into account the fact that different models can noticeably differ in power consumption, it makes sense to compare with each other by battery properties only tools with very similar specifications — and even then very approximately.

Note that the same tool can work with batteries of different capacities — it is enough that they are compatible in terms of connectors and operating voltage. However, if you are looking for a spare battery or a replacement for a failed battery, it is best to choose a variant of the same capacity as the original one.

Battery models compatible with the tool.

When choosing a tool, this information is relevant mainly for models without a battery in the kit (see "Complete battery"). For tools that come with batteries, the battery model is more of a reference—it's mostly "for the future" if a spare or replacement battery is needed. However, this data can also be useful in the selection process - for example, to assess compatibility with an existing battery on the farm, or to find detailed data on compatible batteries and determine how they meet your requirements (in particular, there are formulas that allow you to determine the time of continuous operation from a specific battery; these formulas can be found in special sources).

A device for charging the batteries used in the tool with the appropriate power supply. For models supplied with such a device, the charger model may be additionally specified in the characteristics. This information can be useful not only for finding a spare or replacement charger, but also in case the household has other cordless tools and / or batteries for them. The fact is that many manufacturers nowadays use universal batteries that are compatible with a whole set of tools from the same brand; so, for example, a complete charger may be quite suitable for a cordless grinder or drill from the same manufacturer.
On the other hand, a lot of modern cordless tools come without a charger at all. This option will be optimal, first of all, if a compatible memory is already available, and there is simply no need to overpay for a second device. In addition, the lack of a charger will be appreciated by those who want to choose this accessory separately, without relying on the manufacturer's decision.